Reviews
10mm is sold out. 11mm is limited stock.
I don't have to tell you the impresario of the product because it is a product of FACTORY MAMESHIBA.
The only regret is that the product aims to optimize the LINK ratio by setting the length, but 10mm is sold out. 11mm is only available while supplies last. The standard 12mm is still available. The standard 12mm is still available. 2023,07 http://mameshiba198.blog129.fc2.com/blog-entry-3856.html?sp
You can still get the same Friction reduction effect with 12mm products, but that is the only disappointment.
View detail
cr26carburetor essentials
I bought it because it is a necessity for cr26Carburetor.
I can't put it on yet because Carburetor hasn't arrived yet, but it has a good reputation and I am looking forward to the effects.
View detail
Fits: Others CR-SPECIALCarburetor
Lower Rate Sub-return Spring
Axel is lighter. The direction of the hooks on both ends is the same, which is a little strange, but it does not affect the functionality. View detail
I really don't know if it's a good idea!
I just put it on and I think it's too early to make an imprementation yet, but it seems that Setting as it is is not a good idea.
First of all, Idling is no longer adjustable.
It does not drop from 1500 rpm.
The bottom seems to be darker and the top lighter.
However, when we ran a test run with the bike as it was, it had a considerable sense of power.
It looks promising.
Personally I think it is expensive, but okay with the Ideas part.
View detail
That's an expensive part!
I bought this in hopes that it would make CR Carburetor's heavy Throttle work a little easier.
I was convinced of the price when I learned that the item itself was expensive.
The effect is that Axel's return is better and lighter.
I think this will make touring long distances less painful.
View detail
Fits: Others CR-SPECIALCarburetor
FACTORY Mameshiba Lower Rate Sub-return Spring
Easy to install and very effective!
I'm glad I purchased and replaced it.
View detail
Smooth.
Refresh by cleaning while replacing.
It certainly makes Throttle move smoother and feel lighter. If you are dissatisfied with the current movement, you may give it a try.
View detail
Fits: Others CR-SPECIALCarburetor
Good vibes
I don't know how durable it is, but the Wire adjustment made it lighter. View detail
Mameshiba PEEK link rod for Keihin CR31
I use the CR carburetor in my CB750 for some time and it works nice, although the work of the original throttle cables was not so light. I ordered the PEEK link rod after reading a lot of good comments on the Factory Mameshiba site. Mounted it together with the new spring and must say the work is lighter then before, the inner parts of the carburetor as all of metal had great resistance between each other not to mention the wear of each part. Works nice ;) View detail
Recommendation!
Any of the blistering products here will have carburetor on top ranking You can feel the
It was only available with M Nozzle, but now we have a Link Rod Chromoly screw I bought it from Springwebike and installed it in my GS1000 and Z1 the carburetor itself is currently being sent directly to Mameshiba's shop for TPS processing, and I have time to touch two of them The Z1 version only arrived at the repair shop where we left it
I ordered this Link Rod from webike after confirming it was for a small body I received the NORMALsize and installed it into the CR carburetor for the GS without any hesitation Accelerator operation confirmed! No problem, though
It seems that one millimeter short is the best way to install it in the shop The Z1 carburetor that I'm putting out to the Z1 has returned from TPS processing, Mame Shiba-san I went to check it out They politely changed it to 1mm Short Type! It's very clear that your shop is polite and customer-friendly, and it's very easy to see that you're dealing with your customers I'm thankful and impressed that this is a rare good shop!
i do buy parts that I don't know about when I buy webike's products, though, to make sure they fit!
I'm a little concerned about my lack of product knowledge!
Even with a good product, if you can figure out the finer details of the fit with the Kitchen and answer the question, you'll get a millimeter from the beginning I was buying a Short Type!
I installed it and we couldn't contact you for a return or exchange
I'm going to see how the GS and Z1 look and consider whether I'll re-purchase Short Type
It's quite expensive to buy four pieces If only you would do it when you're the Manufacturer, then this won't be the case!
If you plan to purchase this product, check out the net
Large body:Standard Type Small body:1mm short Please consider buying in Type and order
It's a good product and I'll recommend it to you, but I'd rather buy a good product anyway And if that's the case, it's best to use it for 100% performance, and that's what you're buying it for!
If you are currently using NORMALCRcarburetor and are not happy with it, you can use M Nozzle and Link Rod Low RateSpring Just replace your CRcarburetor with a low rateSpring and your CRcarburetor becomes something else entirely! This is the Parts that you can recommend with confidence because it will be
View detail
Essential items in CR
Currently installing on gs 1000
This time I bought it for Z1
I recently got a lot of Parts for CRcarburetor
Of course I think that electric control will also change dramatically
I do not like pretending to stick sideways
M Nozzle alone is satisfied privately!
It is also stable even at Throw of 1000 revolutions
Axel When you can open it all at once, it will not be CUB
With M Nozzle just input it feels like a performance quite close to FCR Carburetor Body
I like the retro atmosphere of CRcarburetor but I think the performance is TMR or FCR Carburetor Body Selection It is the most recommended part for those thinking!
View detail