Reviews
The power of the GreatGrip!
Anyway, it's a great Grip power.
If it is for ZX6R, you may consider STOMPGRIP or EAZI-GRIP here, but EASI-GRIP side grips twice as much.
Comparison of the stomp 55-14-0037 and the eazi EVO437CL
Thanks to the super grip, knee grip became easier and fatigue during touring was considerably reduced.
Also, eazi has more Cowl side Pad (Lower) The Size is Large, even if you sit on the Seat properly, the knee does not go out of the Pad, so the benefit is Large in daily use.
I first bought the stompgrip, but I didn't like the smallness of the lower pad, so I replaced it with this one.
The price seems high, but other products are like this, so don't worry about it. I think it's a good buy because the effect of reducing fatigue is better.
The only problem is that it smells a bit like a soft Rubber Pom Pom Ball. It doesn't bother me once I stick it on, but when I open the box it gives me a weird tension.
The photo shows how long it takes for the AA Energy Loop to slide down. I was impressed by the strength of the Grip to withstand a considerable angle.
I think this is a product that I can Recommend to others without having to look at it overall.
View detail
somewhat subtle
It's easy to put it on, but you need to modify it a little because it's not specific to your car model.
It is not possible to put it on CRF250M as it is because the exterior is very square.
In addition, the area of the Pad itself is small, so if you make a mistake, there will be no room left.
I think it's a bit of a waste Universal Product as I only used about 70% of it overall.
View detail
Fits: HONDA CRF1000L Africa Twin
Good vibes
It only says CRF1000L in the fitment, but this is Adventurefor Sports.
Color is [Color] It's called Clear, but it's a little dull in color.
If you don't mind the color, you might as well choose Black.
The adhesive strength is quite strong, and it seems to be impossible to take it off unless it is peeled off on the premise of disposal once pasted.
However, it is easy to get air bubbles when attaching, and it is difficult to correct due to the adhesive strength, so attach carefully or apply water.
Texturing is as fine as ideal and Grip is good
The Grip is so good that it may chafe and hurt some Pants fabrics, so be careful.
It is expected to reduce fatigue in the future long touring.
View detail
It's better than I thought.
This is the first time I used the knee grip support and it was unexpectedly good. The color is worse than I expected. View detail
Fits: BMW S1000RR
It works so well.
I bought this to make it easier to Hold on Circuit.
The installation is…muzzy to be honest. First of all, Quantity:Pair (for Left and Right) It's muzzy to put it on the target. (I'm not good at that kind of thing.) Also, it's easy to get air into it, so trying to do it in one shot was pretty Pressure. (I'm in. I'm sweating.)
Performance is perfect. It bites the skin connection at the time of full brake. I thought that I needed to get used to it because it is so much that the degree of freedom is taken away conversely. At other times, I thought it was well made because it did not grip that much.
View detail
Knee grip for you!
I thought that I wanted the feeling of adhesion with Motorcycle more when I was doing a little Winding and Touring, and I was considering a certain Mr. Stomp, but I knew that there was a similar product with a cheap price and bought it.
I think that Evo looks better than Racing Type of a fine point as shown in the impression of the other person here. [Color] I bought Clear and cut out Seat by applying Vinyl of packing to Tank of Motorcycle for Universal Type and writing on Large size of Large body with Magic.
To be honest, the rattling on the edges is a result of my clumsiness, but you wouldn't know it from a meter away lol.
As for the impression that I tried to use it, I think that fatigue was also reduced when Knee grip became easy and Long touring as imagined after all.
I didn't mind the look, though it may certainly be to some tastes.
View detail
It's a lot easier to ride.
I used it on my GSX-R1000 K8. 。 Type is PRO.
Since I ride in jeans most of the time, my knees always slipped and I couldn't grip my knees. Also, it was difficult to ride because my body slid forward, but now I can grip firmly and it is much easier to ride.
My body is less likely to move forward and I can shift my weight more easily.
I use Rear Sets to make the Position a little higher, but with Normal step, the knee drops and there is a little less area to pinch, so it might be about 80 points during Knee grip! 。 (About 5'9" tall.)
View detail
Fits: DUCATI Panigale V4
Not very good in both Design and quality.
First of all, the design is not as good as those of other manufacturers.
There is a round Seal with Manufacturer logo on it, but depending on how the Seal is attached, the Logo may not fit well, and it flew away while driving.
Also, after one year of use, I peeled it off and found that even though it was stored indoors, the color of the seat turned yellow and the glue was very difficult to remove.
If you think about the price on the premise of purchasing the ride stripper, it is cheaper than other Manufacturer, but I think it will be expensive in the end.
View detail
Fits: HONDA CB1000 R
Grip strength is outstanding
First of all, the function and price are perfect. If it is not in stock, the delivery time will take about one month, but because it is cheap….
The best part is that it's not well made, it's just cut to fit the mold, and even if the edge of the seat is convex, it's cut there.
The Stomp Grip is made to avoid cutting the edge of the Seat with convexity, so it looks good and is less likely to get stuck and peel off.
I think this product is also good if you want to raise the price with the same etc. as Stomp.
View detail
Fits: YAMAHA FZ1 FAZER
Easy to re-tension and really convenient!
I used it on my previous FZ1, and I really recommend it. But if you are not careful, if you do the knee grip on the machine which is leaning forward too much, the rubber pad will be shaved if it is Street Type, and the inner knee of racing suit and leather pants will be shaved if it is pro or evo. The grip power is preeminent, and I have installed this product on almost all of my road motorcycles such as MONSTER S2, cbr1000rr, yzf-r1, etc. View detail
You can make it into any shape you want.
When I buy a new motorcycle, I always buy this kind of pad, but since there was no special product, I used Clear File and made a mold. The workability is good if it is Scissors which can cut well. It has been about half a year, but there is not peeled off etc. at all, but it has become a little dirty. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
EasyGrip installation
I bought it for the ease of knee grip and to see if I could reduce the cold from the Tank in the winter.
At first, from the shape of the product, I pasted it in accordance with the color of the fireball, but it was Gap with Knee gripPoint, and it did not make sense at all, and I pasted it again in accordance with the Knee grip position in preparation for destruction.
I think that the feeling of Knee grip has improved considerably compared with the NORMAL state when I feel the pull strongly when it is jeans of the thin warts are firm. In addition, I think that it was possible to reduce the cold somewhat.
I reattached it to the bottom of the tank so it looks ugly, but it's working so I think I'll keep it that way for now.
View detail
Fits: SUZUKI GSXR1300R HAYABUSA
Makes Motorcycle more stable!
[How is it used?
I always use it when I'm in the car.
Was the one you received as per Image?
Buy it at Clear type. Complete [Color] Not Clear, but a little dull.
Was the installation difficult?
Just stick it on, but make sure it's well positioned.Quantity:Pair (for Left and Right) It's best to stick them symmetrically, and also to check where you can get the most performance out of them, depending on your riding position and where the tank is sandwiched between them.
How was your experience with it?
Very good. I thought it wasn't the type to run with knee grip, but it's very nice to feel the stability at the corner of the mountain road. I bought this kind of product for the first time, but I bought it out of curiosity because there were many comments praising it when I saw other impressions. I think the result was very good.
[Included Parts:were they on?
Sticker to put on the hole. degreaser.
[Was there anything that disappointed you?
I wish it was more transparent.
Point and hang of installation
If you want to put it on when it's cold, it's better to put it on while warming it up with a dryer so that air doesn't get in. In my case, I didn't paste it all at once, but warmed it up little by little from the edge, and worked carefully while removing the air, and I was able to paste it beautifully.
[Notes]
You can't reapply. One shot! If you miss suddenly, it is difficult to peel off. That's how strong the adhesion is!
[ITEMS TO BUY TOGETHER
The degreaser included in the kit is small, so you can use Parts cleaner or Silicon-off to degrease the tank before you put it on.
I've heard that Racers also use this product, so if you've never bought such a product before, you should give it a try. If you have never bought such a product before, I recommend you to try it out. I think I'll buy a Black Type next time if it gets worn out.
View detail
Knee grip is now easier!
(Why I bought it and what I liked about it)
Don't break the original Visuals. [Color] I chose Clear.
I bought this to prevent back pain.
Knee grip has become easier and I'm less tired.
(What a shame)
The price is high and it is rather expensive.
The lumpy feeling is so great that you may feel pain if you wear thin Pants.
View detail
The color is .....
Silicon type homemade Seat (Black) I bought a new one. I'm not sure if it's because I'm not a fan of the color.:Gray?
I was a little disappointed because I bought it thinking it was pure Black. I'm looking forward to using it in real life because it's a great product.
View detail
EasyGripPRO
Quantity:I was able to get Tank and TankTrim in 1pc. If you get diagonal TankQuantity:1pc. can be taken firmly, but there is a considerable remainder. If it was greedy and TankTrim also went, Layout was able to take it almost without the remainder if it cut through after going firmly. I am considerably more satisfied than ready-made goods. View detail
Fits: SUZUKI KATANA
This looks great on KATANA.
I wore it on my KATANA which I bought jointly with my brother. It is my brother's hope. My brother likes to ride with Jeans, so he likes this warty type. I don't like to wear leather suit or leather pants because they are shaved. View detail
Fits: KAWASAKI Ninja 1000SX
Is good
This product is just as I imagined. I bought the PRO and installed it on my Ninja 1000 because of the unique tank shape, and it works great for street riding and touring. I bought the PRO and installed it on my Ninja 1000. I will recommend this product! View detail
For Street with less Damage to Racing suit is outstanding.
I use it for my wife's new motorcycle, R25, which is the first time for her to use SUPER SPORTS 750. I also like the Stomp Grip, but the Street Type is the easiest to use as it shaves off the leather suit. View detail
Nice
My bike is 2021 Kawasaki ZX-6R. The tank surface is slippery during riding. Therefore, I bought the eazi grip knee grip support tank grip performance clear from webike. It is easy to use and it prevent my foot to slip during riding. I recommend you may buy this tank grip for your bike. I choose clear colour so that I can keep the kawasaki green on the bike. It looks great! View detail