Reviews
Fits: KAWASAKI ZX-10RR, KAWASAKI ZX-10R SE, KAWASAKI ZX-10R
Convenient but adds weight
good point
Chain adjustment is easy:Bolt with Click feeling and fixed position makes adjustment easy.
The fine scale makes it easy to obtain parallelism, and there is no gap when tightening the Axle.
A bad point
Nut (sold separately) is required:If a pure STD nut is used, the split pin cannot be used due to shallow seating.
There is a designated Nut, but Material:It costs almost 10,000 for Titanium and it's not Castle Nut, so I can't use the allotment Pin after all.
Normally, I don't think it will loosen, but I am concerned because 10R is specified as 130N, but this product is limited to Torque 100N.
Nut with Gills loosening stop will be installed.
Weight gain:400g for both, a large weight gain since the OEM weight is a few tens of grams. 4kg increase in weight according to the 10-fold law under Spring, but no perceptible change for the average person.
Thin detent:The detent on the Shaft head on the Sprocket side is too thin and precise, making it difficult to fit.
Once I tightened it without fully fitting it, the corner buckled.
I like it because it makes it easier to adjust Chain, which I dislike even though it is written in a way that has more bad points.
View detail
Fits: YAMAHA TRACER 900, YAMAHA XSR 900, YAMAHA MT-09, YAMAHA MT-09 TRACER
Genuine Lightech MT09 Chain Adjusters
Looking at getting a set of these for the wife's MT09 bike but in the UK there are not a lot of dealers that actually stock for the this model. I found these on Webike which was a total fluke. I found the correct part from Lightech's own website and got the correct number for the MT09. The wife asked for blue but I changed her mind and then went for black. Keep it nice, clean and neutral looking. The price from Webike was very competitive and around the same as I have seen elsewhere in the UK if there was available stock. Along with a few other parts in the basket, I usually save some as they are what I use frequently. This meant the shipping cost was lower for multiple items and saved me some money. EMS fast is the courier I use as they are by far the best option for me right now. They delivered my order in 5 days from placing it. The space, if any, inside was filled with bubble wrap and air pockets. The outer box was sealed. I had a few smaller parts and some weird shaped ones, this meant nothing could get damaged with movement in the box in transit. Very good idea guys. Upon delivery, the adjusters look absolutley amazing loveley satin black finish and all the adjuster parts are smooth and not creaky like some I have had before from other brands. I have had experience with Lightech adjusters before and I really do like the mechanism of the actual adjuster, very slick. There is a nice lock grub screw on the under side of the rear adjuster, don't forget to loosen that or you will have many issues. Really easy to adjust the chain with these. The adjuster mechanism has a nice click for each notch. You can get so much more accurate results with these than the stock ones fitted. I even double checked with a laser to see how accurate they were, spot on. So, very happy customer and thank you Webike for the great services you provide. View detail
Genuine Lightech adjuster for R1M
I was looking at getting a set of these for the R1M bike but in the UK there are not many places that actually stock for the new model. I managed to find these on Webike which was a total surprise but in a good way. I found the correct part from Lightech's own website and fgot the correct number. Although I was going to go for the red, I eventually decided on the black. Keep it nice and clean looking. The cost from Webike was very competitive and around the same as I have seen elsewjere online. I had some other parts in the basket which are usually saved as they are whay I use most often. This meant the shipping cost was lower for multiple items and good for me. EMS fast is the courier I used as they are by far the best option for me right now. They delivered my order in 5 days from placing it. The outer box was sealed and the space if any inside was filled with bubble wrap and air pockets. As I had a few smaller parts and some weird shaped ones, this meant nothing could get damaged with movement in the box in transit. Very good idea guys Upon receipt, the adjusters look absolutley gorgeous, loveley sating black finish and all the adjuster parts are smooth and not creaky like some I have had before from other brands. I have had experience with Lightech adjusters before and I really do like the mechanism of the actual adjuster. There is a nice lock grub screw on the under side of the rear adjuster, don't forget to loosen that or you will have many issues. Really easy to adjust the chain with these. You can get so much more accurate results with these than the stock ones fitted. I even double checked with a laser to see how accurate they were, spot on. So, very happy customer and thank you Webike for the great services you provide. View detail
Genuine Lightech Chain Adjusters for MT10
I get so annoyed when trying to adjust the chain by using the Yamaha fitted stock ones. Honestly, they are not always 100% accurate and wanted something I know is easy to use, easy to adjust and no misinformation each side. These are what I went for. The Lightech brand are some I have used many times before and only recently started adding them to the Yamaha MT10. I found the part number relatively easily via a UK site. The cost was pretty similar to what I can source locally but again, the gold version was out of stock at my usual supplier. Generally, I have more than one item in each order and try for at least 10. This then custs down on shipping costs as it is spread over so many items. The shipping goes on a point score, which sometimes can be a little weird as some parts that are really small and light are sometimes more points than say something like these. Anyway, I opted for teh EMS fast service. Very good value. All my order was packed shipped and arrived at my door in 5 days. Even though there were some weird sizes and wights of parts in this order, Webike made everything fit correctly inside and even padded out any space with bubble wrap and air pockets so nothing could get damaged in transit. It's not always how the courier handles the package but how the warehouse pack items. Nothing could move much at all in this order and that meant, no damage or anything.Very impressed. The adjuster themselves are a stunning piece of kit. I have already tried the Gilles TCA adjuster on other bikes and to be honest, I think Gilles overthought the TCA ones, the grub screws were tiny and not great. The should have stuck to the KTS version. So, this is why I went for the Lightech option. Very straight forward, not tiny little grub screws to contend with and they just work. Fitted pretty easily, if you know what you are doing. These are smoothly finished and the anodizing is gorgeous. All the thread on the bolts are nicely finished with no burrs. The mechanism for adjusting is smooth asa silk. Great once they are fitted as there is minimal effort to adjust your chain correctly. I did forget, there is one small grub screw. This is the one that stops the rear adjuster bolt from moving but that's about it. I love these adjusters. Makes my life so much easier when it comes to maintenance. Thank Webike for the effort you put into each order. Thanks you!! View detail
Convenient and strong, no problems so far.
[How is it used?
Except for Circuit.
Was the one you received as per Image?
As per Image
It is only expensive.
Was the installation difficult?
It is easy as just pulling out the Axle Shaft.
How was your experience with it?
It is very easy to adjust the chain without loosening the Axle Nut, although there is some resistance at first.
There are 3 clicks for every 1mm of adjustment, allowing for very fine adjustment and a solid click feelingQuantity:Pair (for Left and Right) It's easy to match.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Availability and clarity of Instruction Manual
There is an instruction manual, but it seems to be common to all models.
I can interpret the contents, but cannot confirm the number of parts.
Opinions and requests to Manufacturer
When we inquired at the Manufacturer Japan distributor, they replied that it was not included in this model from the beginning, as they could not confirm the number of parts. This should not be a troublesome inquiry, and I felt very bad.
The box it came in was also torn with the remains of an open package, so I thought it was even more insufficient.
I will not be purchasing any more products from this Manufacturer.
View detail
Chain adjustment is easy
It looks cool, and chain adjustment has become easier because the one-click pitch is fixed.
I'm not sure about the custom point of view since it's not a prominent part.......
It's a bit pricey.
The installation is also not difficult because it is properly translated (with Instruction Manual for input here).
View detail
Convenient
I don't see many motorcycles with LighTech:LighTEC, but I think LighTech:LighTEC products are good in design and functionality.
Chain adjustment can be adjusted well.
View detail
Great product
Makes chain adjustments a breeze - just loosen the axle and give one click to each adjuster and re-tighten axle. Job done. Product is very well made and I will be putting them on all my future bikes because of how easy it makes adjustments. View detail
Chain adjustment is a breeze!
You can adjust the chain quickly, the center won't go out of whack, and the click is easy to hear. The price is a bit steep, but if you don't pay the big price, this is a recommended product.
I also installed the optional Stand Hook. I'm glad I chose the red color to stand out.
View detail
Chain pull is so easy!
It took us a while to get them back, but that's ItalyQuality
The construction is very clean.
I used to use GILLES TOOLING's Adjuster.
If you want to make fine adjustments, I think it's Gills, and if you want to have fun and adjust, this is it.
By the way, you can use Pad of Gills because Pitch between Screw is the same.
Installation is at your own risk …
I personally wish that I could have chosen Titaniumium color or some other meek color …
View detail
Accurate chain adjustment
Chain Adjuster itself is easy to adjust accurately and quickly, although few manufacturers offer Aftermarket parts.
And the Anodized process is beautiful and I fall in love with it every time I look at it from the side
View detail
Fits: YAMAHA TRACER 900, YAMAHA XSR 900, YAMAHA MT-09, YAMAHA MT-09 TRACER
It looks and performs well
The OEM Chain Adjuster was purchased because the scale is too sketchy for Large to adjust
The quality of Rye TEC's products that I used to use in my GSX-R1000 was good, so the MT09 was also made by this Product
Installation is easy if you have the ability to remove the rear tire
Remove the Axle Shaft and remove the OEM adjuster and install this product on the adjuster Just fix it in the bolt hole, it takes about 15 minutes! 。
The quality is as good as Lai TEC is easy to adjust because it is fine in 0.25mm increments
The problem is the delivery date, and since it is an import from Italy, it is affected by Corona, and the original delivery date was It took us three weeks to two postponements and ended up taking two months 。
View detail
Used in Z900RS
It is for Z900, but the part number of the Swing Arm is the same, so I was able to install it with no problem
Instead of pressing against the Bolt with the Chain's Tension like the OEMs, you can use the The position of the ASKUL is fixed by the amount of protrusion of the adjustment bolts, and the scale is easy to adjust it can be finely adjusted as it is engraved in increments of about 1.5mm
The ASKUL is easy to use because it doesn't tighten up the Gap or anything
I was worried about whether or not it would match the atmosphere of Z900RS, but it is not so obvious if it is black It is
I wish I had mentioned the tightening torque in the instruction manual because it is not mentioned, translation (enter here) There's no instruction manual for you to follow, but it's not that complicated, so you can use your phone's Camera to translate it If you do, there is no problem
View detail
Best gem
The adjustment of Chain will be easier like an idiot. More accurate.
More than anything Made in Italy. Beautiful as a work of art until the details. It is a gem you want to put on by all means.
I feel a little high, but I am convinced if this can be done.
View detail