Reviews
Fits: KAWASAKI NinjaH2SX, KAWASAKI NinjaH2SX SE, KAWASAKI NinjaH2SX SE+
Not only the phone Mount.
I purchased these parts to reduce the vibration coming from the Handlebar as well as the phone mount. I used to feel numbness in my hand due to the vibration, especially when turning at high RPMs, but this seems to have been slightly reduced after installing these Parts.
Of course, it can also be used as a smartphone mount.
If only the screws securing the handlebar to the bridge can be removed, the rest is bolt-on, so it is not a very large work, but anyway, removing the original screws is large and strange,
View detail
It can be installed on the '24 model, but I'm not sure if the effect is worth the price...
I wanted to improve the footing of my ZX-6R, which has a Seat height of 830mm, and I compared the images with those of the 23-year-old model when I switched to the 24-year-old model, and decided that they were the same. I was lucky if I could feel the effect of 10mm bean jam removal.
I'm not sure if I'm comparing the OEMSeat correctly since I've only used it for about 30km, but I didn't feel much of an ankle-less effect or improved seating comfort with the low rebound material incorporated.
However, the fact that the Lines are more curved with corners than OEMSeat makes it easier to transfer the feet.
To be honest, I think the effect on the investment amount may be disappointing, but it may be good to have for those who are clutching at straws to improve their footing!
View detail
An OEM seat with low rebounding material
The seat is modified from the OEM seat and have no problem on putting it on the motorcycle. The finishing is great and the bedding is relaced by a low rebounding material. Although I did not measure how low it reduced, I can clearly tell the difference. View detail
Cost performance
I chose to purchase one without anko (sweet bean paste) but received one with anko (bean paste) removed, which I think is a rare case, so I could compare both forms until I returned it.
To be honest, it is hard to tell from a quick glance from above. When I put a ruler to it, the back part of the Seat is indeed thinner.
However, they did not seem to differ by more than 2 cm, but I guess it depends on where you measure.
If you turn them sideways and lay them side by side, you can see the thinning areas.
I could not use the one with anko (bean paste) removed because I had to return it, but I used the one without. The ones that have not been removed have been used. The footing is also the same. It seems that they are indeed not anko-free.
I originally had no complaints about the footing, but I just had a hard time with my buttocks hurting, so I bought it.
After riding for a short time, the pain in my buttocks was indeed relieved. I honestly don't know if this was due to the low resilience Material or if the original Seat was old and stiff, but I definitely felt the effect even after a short ride.
However, although it is effective, it is expensive for what it is. I don't think it is very cost-effective.
If you can't stand buttock pain, you may want to give it a try.
View detail
Lowdown Seat for NINJA400R
(1) Unknown if it is Lowdown or not.
(The feeling of straddling it is not much different from the original one. Is this what it feels like at about 2 cm?)
(2) Size does not match slightly (individual difference?)
(3) Overall, I think I didn't have to replace it (it was just a spare for Seat).
View detail
The installation was very effective. The
As I am 167cm tall, I was a little dissatisfied with the MC51's footing and was thinking about lowdown suspension etc., but I found this product and decided to install it because it seemed easy to install and lowers the seat height by 2cm.
I ran about 200 km immediately after installation and my buttocks hardly hurt at all. I think MeritLarge is better than OEMSeat. Also, the finish and fitting are perfect and I am very satisfied with my purchase.
View detail
Fits: KAWASAKI Versys-X250(17-), KAWASAKI Versys-X250(17-)
VERSYS Lowdown Kit
He is 163 cm tall and weighs 53 kg.
NORMAL one foot on tiptoe, both feet on tiptoe after change.
Easy to take it easy at a pause on a bad road surface.
Cut and welded about 25mm of Side Stand.
View detail
So this is what it means to get the corners off.
OEMSeat with horns is an Image that sits Seat with the whole buttocks
Low seat without corners is an Image that sits on the inner half of the buttocks and thighs.
I think it's doing a good job of improving footing.
The original cushioning of the seat is reduced in thickness.
Even though it is made of soft Material, it feels hard.
I would say that I can feel the gaff of the road surface more now rather than feeling the hardness of the Seat.
I can recommend it to anyone who really needs help with footwear.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Do not buy
Item is badly made and very poor quality . I am dissapointed and I will not install it to my bike and i cannot to recommend to anybody Lassi Levo View detail
Dismounting Caution
Fitted to prevent moisture and for aesthetic purposes.
It has the same glossy finish as the Frame, so it has a good sense of unity.
As noted in the Instruction Manual, care should be taken when removing it because it is made of plastic and the nails are thin.
View detail
Loved the design, and the installation looks even more Exactly than I expected!
I liked the design, bought it, and when I received it, I found it had scratches from the beginning. I wonder if there is one!" I can fix it myself later." And well, I've already broken that part down.
Originally, the reverse side of Cowl is also in Unpainting condition.
I was wondering if I could paint it as I like later.
The actual installation was even more EXACTLY what I expected!
I was really curious about the Sazae Head on the DigitalMeterCover for the SV650. (Lol) I am very satisfied with the functionality of the product.
View detail
K,s STYLELow seat is the best!
When I signed a contract for a new Z900RS, I purchased a low seat from K's STYLE using the points I received for purchasing a new car. As a 60 year old 158cm old man of Showa generation, I was worried about my footing with 800mm seat height, but it is only 10mm lower, but it gives me a different feeling of security. There were comments on SNS etc. that the seat is hard and hurts my buttocks, so I was relieved to see that K's STYLE's seat has a low rebound material only in the front seat so my buttocks do not hurt even when touring for a long time. I was relieved and purchased it. I was very satisfied with the quality of the product. The packaging was also in very good condition. I received it in 3 days from purchase to delivery at home. I appreciate that I was able to choose various payment options. At the time of this post, I had just exchanged the seat for a new one before I took delivery of my car, and I was able to step over the car to check the stability of the footing, but I was sure that it was 10mm lower than before. View detail
Accuracy is mixed
The finish of products processed from Kawasaki OEM parts differs from product to product, so I would like the accuracy level to be standardized. View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja400
Drareco pedestal
Designed to fit the car model, Bolt On and installation is complete!
However, since the Front is matched to OEMMirror, it was replaced with ThirdParty product, so a little ingenuity was required for Camera installation.
View detail
It's a good product
The first one sent to me had a problem with the uncoating process Quantity:Pair (for Left and Right) I could see the difference with my eyes. I think it is hand scraped, but I could see the indentation on the surface of Seat's skin, even from the front.
According to Manufacturer's opinion, it is not a defect because it is not very visible. The dent is on the Left Side surface and is always visible when getting in and out of the car.
However, since it is handmade, no two pieces are likely to be the same, so it is up to the customer to decide what kind of item will be delivered.
View detail
Fits: KAWASAKI Ninja1000SX, KAWASAKI Ninja400, KAWASAKI Ninja1000, KAWASAKI Ninja650, KAWASAKI Ninja400R, KAWASAKI Ninja650R
Used due to change from Cowl mirror to Handle mirror
The relocation of the Cowl mirror will fill a hole in the Mirror Hall and provide a dress-up. View detail
Satisfied?
It has been about 6 months since I lowdown the Motorcycle and noticed the tilt.
I purchased this product because I had a bad experience with my Motorcycle almost rolling over when I applied force when mounting the Bag on the Touring.
The Short Stand is one centimeter shorter than the OEM stand, but is it more effective?
Motorcycle is now stable.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-6R
I installed it for another car model.
I installed the ZX-12R with the Handlebar Up Type in TouringSpec. The mounting hole was made a long hole and the point where it contacts Napoleon-on-Mirror was shaved off. At first, the front camera was fixed under the ram air duct, but it felt uncomfortable, so we purchased a different model this time with the assumption that it would be modified. The size of the bracket is too large to be noticeable, but I personally like the design. The camera is made in China, so the camera mounting holes were also modified.
Well, it's like Parenthesis is good (laughs), it's self-satisfying.
View detail
Great rear carrier
Love this rear rack. It is more expensive that Givi and for a good reason. Rack is build from strong steel tubing, welding is done properly, has holes for water digress. Very well thought out for mounting to existing bike supports. Powder coating looks quite thick as well, time will tell. All transitions in the metal shape are gradual with reduced stress concentration areas, which is the main reason I picked this carrier after seeing multiple Givi failures. Arrived within 4 days to Canada View detail
K’s-STYLE
About quality and texture good texture About the use experience There is no difference between the comfort and the original factory, and the sitting height is reasonably reduced Products purchased together back hump Installation difficulty Easy to install Cost-effectiveness and comparison with other products Very cost-effective About shipping and packaging tight packaging Any concerns, cautions or advice when purchasing no suggestion View detail