Reviews
It is very good with Case!
The kit is a reproduction of the HRCCarburetor kit and is very good with Case.
Unusually for a T2 product, the Instruction Manual is also complete.
I want to replace frequently used Jets and Needles on a regular basis.
It would be even better if you could sell them in bulk.
View detail
Thick and very good quality
It is a copy of HRC, but the copy source is PeLePera, which deteriorates quickly and cannot be bought new.
This product is very good because it is thick and does not get damaged after repeated washing.
View detail
appearance
It is installed to improve the appearance.
Carbon is thin and easy to install on the surface, but the hole position must be slightly modified for installation. The installation was completed without that much difficulty. Is there an individual difference? I guess there are individual differences.
I am happy with the improved appearance, but the price is a little high.
View detail
With T2Racing seat cowl
Backed Seat Cowl and Quantity made by T2RACING:You can sit very far back if you use it in a Set.
It is a RECOMMENDATION for those who have a long torso and cannot get down.
The footpeg has a shorter one with bank angle priority, but
I have large feet and they come off easily, so I replaced them with RaceConcept's regular length ones.
Baby Fe products often have parts that look good but are not strong enough.
Perhaps it reduces aggression to Frame by breaking first in the event of a fall.
Recommendation to buy spare parts individually in case of emergency.
View detail
Fits: HONDA NSR250R
Turning into a luxury suspension
The suspension that moves like a moped in NORMAL changes like a high-end suspension in Large type SS.
I think I have no choice but to buy it because it can be popped into ForkInner with no modification required.
View detail
Fits: HONDA NSR250R
Best Suspension
It lacks a little bit of extension damping, but it is possible to change the spec. and I think you can create your ideal suspension.
Note that this is for T2RACINGRear frame only.
View detail
Ali if you like the design
The water circulation of the engine of the NSR250, a 30-year-old motorcycle, is an understatement.
I'm falling apart.
Since there are no new Parts available, the only option is to replace it with this one.
View detail
Clearance with OEM Product
I bought the OEM Fixing plate because the Clearance of the groove is wide when using the OEM Fixing plate and I didn't want it to rattle after a while. (Even if each component is new, it will swing sideways.)
When fitting the shaft groove and shifting to the bolt hole, there is almost no clearance, so there is no rattling and the bolt is attached effectively.
It was exactly what we wanted!
We'll see how this goes for a while!
View detail
Used for NSR250R JHA chan.
It is a little expensive, but I bought it as a replacement for JHAChamber's Spring, which was damaged.
It can be mounted securely and will last for a long time because of the vibration-damping rubber.
View detail
Used for NSR50
Installed on a nsr50. the OEM cooling performance is tough in the summer. After changing to this one, it cools well and the temperature never rises to almost 80 degrees Celsius. Very good product. Radiator hose for NSRmini is required for use. View detail
I am using it on my NSR50 without any problem.
It is a little stiff and requires some force when inserting, but it will stick. It seems to be more durable for that reason, and is necessary when attaching the NSRminiRadiator to the NSR50. Thanks to this RadiatorHose and miniRadiator, there is no heat problem in summer. View detail
Better than I thought!
We have a long seat height, so when we get down on Straight, it becomes a form of pushing Seat Cowl with the butt, and the butt slips out from the shape of Cowl like the photograph, and it becomes a scary feeling, so I bought it as a countermeasure.
It's relatively thick, so it's difficult to Cut cleanly, but it's effective if you don't mind the look.
View detail
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA NSR250R
Clutch Spring wasn't in it.
I thought I had checked before I bought it, but it didn't have a clutch spring in it, and then I hurriedly bought a clutch spring from another Manufacturer.
I didn't notice it at the time because I thought I didn't check it enough, but after I finished assembling it, I checked it again and found that the Quantity:I found it to be a Set.
I'd like you to return Gold for Spring.
View detail
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250R
Steering
I bought this for the Steering Damper installation.
It is a definite Manufacturer, but the price is high.
The thing is not bad, but the packaging is …Vinyl, unfortunately.
I don't mind the packaging if the price is low, but for a 10,000+ item.
For this price, you need better packaging.
I don't need Sticker, I want it to be cheaper.
View detail
too weak.
The support is cracked, I just installed it after 500km… There was never fall down and no accident. I think the welding is too weak. And I don't know how to apply for after service because I don't have any information about this brand. I can fix it myself, but I'm just going to buy another product. View detail
Fits: HONDA NSR250R, HONDA NSR250R
That's not the picture
Material:I bought Titanium and the angle of the Silencer is different from the picture.
The upper silencer is almost level with the ground at the top of the rear tire, so the exit of the silencer is also facing down. So the exit of silencer is also downward.
I shouldn't have bought Level even though I'm paying high Gold.
Postscript.
I asked about the angle, but it is not a manufacturing defect or error in the product.
He said that the Silencer appears to be raised because the car in the picture uses the Rear stand. Oh, I see.... Well, it makes sense.
I'm convinced, but I'm depressed because it's actually lame.
(If so, shouldn't you change your picture? I think)
It is not a product problem, so I will modify my rating.
Let's all look at every detail in the photos!
View detail
Race ish feeling
Material:I had a hard time deciding between Titanium and CarbonStainless Steel, but I decided to go with CarbonStainless Steel because of my budget. I think it's a little heavy, but it's cool and well made. View detail
Fits: HONDA NSR250R, HONDA NSR250R
That's not the picture
Material:I bought Titanium and the angle of the Silencer is different from the picture.
The upper silencer is almost level with the ground at the top of the rear tire, so the exit of the silencer is also facing down. So the exit of silencer is also downward.
I shouldn't have bought Level even though I'm paying high Gold.
View detail
Fits: HONDA NSR250R, HONDA NSR250R
Stainless Steel
It looks beautiful with Stainless Steel, but it is quite heavy?
It's nice to install without Bracket, but I'm a little worried about cracking under the load of vibration.
View detail
cool
The kill required to put the attached Sticker in parallel is PRO level.
Kacke, that's all.
View detail