Reviews
Parenthesis will be better
[How is it used?
It was installed in exchange for a NORMAL Silencer cover.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It was not difficult. Even beginners can do it.
How was your experience with it?
It just looks different, but Parenthesis is good and satisfying.
[Included Parts:were they on?
KOSOLogo stickerQuantity:I'm glad it came with 1pc.
[Was there anything that disappointed you?
None
View detail
Fits: HONDA Livedio ZX AF35, HONDA Livdio <Compatible model number> AF35-1000000-2199999 <Compatible model> SK50M(M), HONDA Livdio J <Compatible model number> AF35-1000000-2199999 <Compatible model> SK50M(V), HONDA Livdio <Compatible model number> AF34-1000000-3299999 <Compatible model> SK50M(M), HONDA Livedio <Compatible model number> AF34-1000000-3299999 <Compatible model> SK50M(V), HONDA Livedio <Compatible model number> AF34-1000000-3299999 <Compatible model> SK50M(T), HONDA Livedio <Compatible model number> AF34-1000000-3299999 <Compatible model> SK50M(S), HONDA LIVEDIO CHESTER <Compatible car body number> AF34-1000000-3299999 <Compatible model> SK50M(T), HONDA LIVEDIO CHESTER <Compatible car body number> AF34-1000000-3299999 <Compatible model> SK50M(S), HONDA LIVEDIO CHESTER <Compatible car body number> AF35-1000000-2199999 <Compatible model> SK50M(Y), HONDA LIVEDIO CHESTER <Compatible car body number> AF35-1000000-2199999 <Compatible model> SK50M(M), HONDA LIVEDIO CHESTER <Compatible car body number> AF34-1000000-3299999 <Compatible model> SK50M(R), HONDA LIVEDIO CHESTER <Compatible car body number> AF35-1000000-2199999 <Compatible model> SK50M(V), HONDA Livdio ST AF35 <Compatible car body number> AF34-1000000-3299999 <Compatible model> SK50M(M), HONDA Livdio ST AF35 <Compatible VIN> AF34-1000000-3299999 <Compatible model> SK50M(V), HONDA Livdio ST AF35 <Compatible VIN> AF34-1000000-3299999 <Compatible model> SK50M(Y), HONDA LIVEDIO CHESTER <Compatible car body number> AF35-1000000-2199999 <Compatible model> SK50M(T), HONDA LIVEDIO CHESTER <Compatible car body number> AF35-1000000-2199999 <Compatible model> SK50M(R), HONDA LIVEDIO CHESTER <Compatible car body number> AF35-1000000-2199999 <Compatible model> SK50M(S), HONDA Livdio ST AF35 <Compatible VIN> AF35-1000000-2199999 <Compatible model> SK50M(Y)
A little expensive, but this is good.
Clutch springs are very easy to replace.
You can also adjust the tension with the Adjustment Screw, "A little more" You can also adjust the
It's a little expensive, but it's useful.
View detail
จัดส่งรวดเร็วการแพ็คสินค้ามาดีมาก สินค้ามาถูกต้อง ไม่ผิดออเดอร์ ออเดอร์อะไรไป จัดส่งได้ตามที่ต้องการ และรวดเร็วอีกต่างหาก View detail
Fits: YAMAHA GRAND AXIS, YAMAHA VOX, YAMAHA VINO, YAMAHA JOG, YAMAHA GEAR, YAMAHA VINO, YAMAHA APRIO, YAMAHA JOG50, YAMAHA BWS50, YAMAHA BWS50, YAMAHA Old JOG, YAMAHA Old JOG
Just receive item
Second time order from webike..the quality of packaging still tip top for me with the bubble plastic and so on..well order again in future..thank you View detail
Fits: SYM MMBCU, YAMAHA X-FORCE, YAMAHA FORCE 2.0, SYM DRG
Front Fender feels longer and is replaced.
The product feels less durable than OEM.
Just the right length of Fender that I was interested in.
Self-satisfaction
View detail
Fits: YAMAHA CYGNUS GRYPHUS, YAMAHA CYGNUS GRYPHUS, YAMAHA CYGNUS GRYPHUS, YAMAHA NMAX125, YAMAHA NMAX155, YAMAHA X FORCE, YAMAHA FORCE2.0
Somehow.
It's just a replacement, because I can replace it with 3 Screws. View detail
Gold ♪ from the photo ♪
I think it is difficult to replace the bolt on the OEM footpeg with a half-assed tool because the locking agent is effective when removing the bolt from the OEM footpeg. I think it is difficult to replace the footpeg. View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA cub, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA cub
Pimp to LITTLE CUB (carburetor)
[How is it used?
Normal kick is dirty and needs to be replaced
Was the one you received as per Image?
Plating is thicker and looks better than the photo.
Was the installation difficult?
Just a normal exchange.
How was your experience with it?
I was worried about interference with the Exhaust System, but there is enough room for a Large
I'm using WirusWin's RODExhaust System, but NORMAL would work too.
[Included Parts:were they on?
Screw for fixing
[Was there anything that disappointed you?
I'm a little concerned about it hitting the Side coverretc. because it falls too far inward when it's tipped over.
I have no complaints about this level of quality for a few hundred yen more than the OEM compatible product.
View detail
Fits: YAMAHA VINO125, YAMAHA VINO125, YAMAHA BWS125(BWS), YAMAHA BWS125(BWS)
Good cost performance, durability, and quality
The 6 pieces are under 1000 yen, but the pieces under 13g are finely lineuped in 0.5g increments, with little variation in weight, and the Edge is rounded and carefully finished.
Also, although the durability is not specifically claimed, it is good with almost no wear even after 10,000 km of driving, with only the Light tune level of the drive system and some Engine tinkering.
View detail
Psycho ー
It was good. I would definitely recommend! View detail
Fits: YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA CYGNUS X, YAMAHA CYGNUS X FI
Finally installed ^^;.
I bought it a long time ago and finally had time to install it.
I don't have to tell you that KOSO is the only one who made it outclassing ^^.
Thanks to the new small Axel opening, the burden on the wrist is reduced and the rider will not get tired even after riding for a long time ^^.
The Gauge that indicates the Axel opening degree also doubles the satisfaction.
As usual, it may be a little expensive, but it's worth buying.
View detail
Fits: YAMAHA BW'S125, YAMAHA BW'S X, YAMAHA BW'S R, YAMAHA BW'S 125, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X
It was almost almost Bolt On.
It is a convincing creation, as one would expect from KOSO.
The connection surface with the Cylinder is not distorted at all, and the Injector slot is also very precise, neither loose nor tight, just fit (although it takes a little bit of hang to insert it because it is too just fit).
The only thing that needed to be done was the processing of the OEMBracket shown in the photo, as per Title. Almost Almost." It was Bolt On.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA SMAX[1DK], YAMAHA FORCE155[BH9]
Cool!
Installation is easy and cool.
Minus was slightly distorted.
No problem once installed.
View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
Changed from Red to Black
[How is it used?
The same product in Red was used, but due to the increase in mileage and the change in body colorImage, it was changed to Black.
Was the one you received as per Image?
The bolt has been changed from this product's Included Parts:to Posipolini's M5 Bolt, and the black-colored Filter Frame has been changed to give the image a sense of massiveness.
Black suits Monotone's body color.
Was the installation difficult?
I have been using the bare spec. without OEMAir cleaner cover for some time, so I can replace it with Bolt On.
Since the Bolt on the Left is deep, there is a hole for maintenance on the Cowl, and if the Cap is removed, it is easier to turn the hexagon.
I leave the Cap off because of how often I change it due to weather.
How was your experience with it?
We have been using this product for some time, and when we use a new product immediately after replacement, we feel good about the Response.
It also goes well with the BEAMS R-EVOFull Exhaust System.
The intake sound is pleasant.
We are currently using the higher density Filter of the two Filters.
Since a low-density filter can be replaced by disassembling the filter frame, a new low-density filter will be attached to the removed Red, and the Red will be reused in a form that can be changed depending on the situation.
The filter I used does not have any tears etc., so I think I can reuse it by washing it.
[Included Parts:were they on?
Includes six M5×40mmBolt.
The length is long enough to accommodate the thickness of the OEMCover.
I have changed to Posipolini and am not using it.
The Instruction Manual describes the PowerCheckCurve, and the changes in usage are clearly visible in the Graph.
[Was there anything that disappointed you?
Not to disappoint, but there used to be an inexpensive product that was for sale, without Filter Frame and with only 2 Filters, but now this Quantity:There is only Set.
It would be great if you could resell it since it is a consumable item.
View detail
Change of Mood.
The exchange was smooth and simple. The color is black, unobtrusive and simple, and the Rubber Packing (Nut blindfold) is also included.
It's good
View detail
Small but easy to see and use!
Since it is a SPMODEL, it is not equipped with any convenient functions such as a clock, and since the crank is heavy, the cell will not turn even if the voltage drops a little, so it was installed for voltage monitoring.
【good point】
Anyway, the body is small, so there is no need to worry about the mounting position.
Back light is bright enough to see well in the Tunnel.
The temperature has little use, but the clock and voltmeter are essential.
[Trouble.
In order to make the power supply extraction SMART, we extended the electric Cable to the Battery installation area by ourselves.
IgnitionON is connected to the Wiring of the ETC, and Always ON is directly connected to the Battery+ terminal.
[Still unclear].
I don't know what happens when it hits the rain.
View detail
Small but easy to see and use!
Since it is a SPMODEL, it is not equipped with any convenient functions such as a clock, and since the crank is heavy, the cell will not turn even if the voltage drops a little, so it was installed for voltage monitoring.
【good point】
Anyway, the body is small, so there is no need to worry about the mounting position.
Back light is bright enough to see well in the Tunnel.
The temperature has little use, but the clock and voltmeter are essential.
[Trouble.
In order to make the power supply extraction SMART, we extended the electric Cable to the Battery installation area by ourselves.
IgnitionON is connected to the Wiring of the ETC, and Always ON is directly connected to the Battery+ terminal.
[Still unclear].
I don't know what happens when it hits the rain.
View detail
Attachment was installed using a separate Attachment.
It is attached using Attachment between RadiatorUpperHose.
There are similar products other than KOSO, and the font style of the numbers is difficult to read in the similar products.
The image is KOSO OEM Product.
OEM Product is in short supply, but we had it in stock here, so we purchased it as a spare.
View detail
Fits: Others Universal
Used for carburetor diversion
Used to divert CBR150R OEM Carburetor to MAJESTY125.
If the Accelerator WireBracket is cut 20mm and welded, the carburetor can be diverted by pimping.
I bought this one because I wanted to have a Choke Lever around the Handlebar since I can convert it to ManualChalk.
The OEMcarburetor for CBR150R was a don fit since the PWKetc. and Chalk standards are the same.
It is also 1500mm long, so it can reach Handlebar.
However, if you are making a Bar handle, etc., we recommend that you install it as close to the Handlebar Post as possible.
View detail
It will be Ka Chica Chi.
IC Blinker Relay but it makes a chica chica chica sound
The price for the sound is Large Variant Reasonable!
View detail