Reviews
It's a little dark.
It's cheap. Installation is easy.
It is dark, so it is hard to see in bright time.
At night, it's LED so it's easy to see.
I don't know what the margin of error is, but I think it's better than the OEM about water temperature system.
View detail
This is a replacement for the Fender Eliminator Number made by DAYTONA.
I thought LEDs would never break, but the one from DAYTONA's Fender Eliminator broke in less than a year. DAYTONA's for Repair is expensive and the life span is too short, so I decided to try the KOSO one.
The screw pitch was slightly different, but the koso one has a thinner bolt, so I was able to install it. I was not expecting the warm color of the LED, but it is well made and looks promising. The nut is very small and 5.5mm, so it is better to check the tool for installation.
However, it would be helpful if this kind of thing was a little cheaper.
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
The intake sound will be cool.
It is used for CYGNUS X type 2.
I've been using it since the days of the normal engine, and it seems to increase the efficiency of the air intake considerably, and the intake sound becomes more explosive.
Even a normal muffler vehicle can be quite noisy, so be careful if you live in a noise-sensitive environment.
It is said that just replacing the large engine will increase the power by about 0.5 horsepower.
In particular, a larger diameter throttle body, a sub computer, and a full computer will increase the power.
The internal Filter is also removable for easy cleaning.
OEM filters can only be replaced with assemblies after a certain period of use, but with this product, only the filter part can be removed, cleaned, and reused.
This is very helpful for Scooters, as their air intakes are close to the ground and tend to draw in dust and impurities, which can easily contaminate the Air Filter.
Because of its low price, it has become a standard custom in the CYGNUS community.
I am currently running a high camshaft + high compression head spec. with a bored up engine, and I think this product is sufficient for air cleaner.
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
Bore up to the vehicle.
It was used for CYGNUS X type 2.
I bought this as an update to my OEMAir cleaner box because I was told that the intake volume was not enough when I upgraded to 160cc and installed a High Camshaft + High-Compression Head.
For installation, it is necessary to remove the duct of the OEMAir cleaner box and enlarge the mounting holes to fit.
It is very easy to get a used OEMAir cleaner box in advance and finish the integration process.
This product will increase the intake air volume much more than changing the air filter, because the pipe to be introduced into the air cleaner box will be almost twice as large in diameter.
In addition, no matter how much you improve the efficiency of the air cleaner box, it will not be effective if the throttle body is NORMAL, so the throttle body must also be Large diameter.
Although the combination with the Bore up achieved a considerable increase in power, the fuel consumption was much worse than with the Normal throttle body + Normal air cleaner box, dropping to about 20km/Liter.
The price is cheap, so you can try it out for now and come up with a variety of settings.
View detail
![KOSO Universal Exhaust Slider [Red]](https://img.webike-cdn.net/catalogue/14762/02060122_511131bfc39a4_TS.jpg)
I still...
I still don't know how to install it.
I'm pretty sure that an OEM Exhaust System won't work, but I'm not sure.
I don't know (sweat)
View detail
![KOSO Universal Axle Slider [Silver]](https://global.webike-cdn.net/photo/impression/0e/0e3480c5051ef85e0f4e87c29836eed4L.jpg)
I can guard it well.
It is used for CYGNUS X2 model.
The Axle Shaft does not interfere with the ground on Scooters because the front fork is short and the cowl sticks out in a low position.
Since I had replaced the shaft with the Chromoly Axle Shaft from Other Brand Product, I had enough room to install the Axle Shaft Slider, but I think it is important to note that the length may not be enough for the OEMAxle Shaft.
When I used the thin nut supplied by another company, I sometimes licked the screw mount of the nut when I tightened it with the specified torque, so I did not use the supplied nut this time either.
When the mount base is installed, only the slider part can be replaced without having to remove everything.
Also, I think the Axle Shaft will be less likely to rust in the rain, etc. since it is completely sealed.
Since it has a shape that seems to have a high degree of universality, I think it can be used as a Frame Slider or Exhaust Guard in addition to the Axle Shaft Slider.
View detail
Versatile
I bought this as an Oil Temperature Meter for my CYGNUS.
I thought it could be used as an Oil Temperature Meter as well as a water temperature meter since it only says "Thermometer", but it was usable as expected.
Since I could only take the oil temperature from the drain bolt, it may vary considerably, but I was able to confirm the correlation with the oil temperature taken from the cylinder head, so I think it is a good guide.
According to the product spec, when the temperature exceeds 120℃, it only flashes and does not display any further temperature, but this did not affect me particularly because the oil temperature from the drain bolt never rises to that level.
The difference in oil temperature between the cylinder head and drain bolt is said to be about 20 degrees Celsius, and mine was about the same for a large cylinder.
My friend is currently using it as a water temperature gauge, and it is working fine. I think the durability is quite good.
The price is also low, so I am happy to be able to use it when I am testing a vehicle.
It is also very useful because it has many Adapters and can be used in a variety of ways.
View detail
Fits: YAMAHA Cygnus X, YAMAHA Majesty 125, YAMAHA BWS125, YAMAHA BWS125X, YAMAHA Axis Street, YAMAHA S-MAX, YAMAHA Majesty S., YAMAHA Vino 125, YAMAHA Bino Bianco, YAMAHA Vino Bianco R, YAMAHA NMAX125, YAMAHA NMAX150, YAMAHA NMAX155, YAMAHA SV-MAX, YAMAHA AEROX125, YAMAHA AEROX155, YAMAHA FORCE 155, YAMAHA Tricity 125, YAMAHA Tricity 155., YAMAHA Cygnus SV
I've been using this for a long time
I have been using this product for CYGNUS X for many years since the Normal engine days.
I have tried many Weight Rollers, from OEM Weight Rollers to DoctorPulley, and this product is the best overall.
First of all, there is no back and forth orientation, so there is no chance of accidental insertion.
Many Weight Rollers have a fixed orientation, and if you put them on in the opposite direction, the Pulley will be shaved.
The life of the roller is longer, and the outer diameter of the roller seems to be shaved off later than those of other companies. In particular, I have found that the cheap No Brand Weight Rollers have been shaved so hard that they sometimes turn into RoseRose inside, but this product has excellent durability.
Also, the bright brown color makes it easy to find even if it rolls around the garage. The bright brown color makes it easy to find as it rolls down the Garage. I like the color that stands out because the pure black Weight Roller is invisible in the shadows.
I use an electronic scale that can measure down to 1/100th of a meter, and there is almost no Rose variation when new, with an error of about 0.02.
If I had to say, I would be happy if the weight of the Weight Roller was written on the inner diameter so I don't have to measure it every time.
I am currently running the engine at more than 10,000 rpm with the engine bored up, and it has survived for one year without replacement.
View detail
Fits: YAMAHA BWS125(BWS), YAMAHA BWS125(BWS)
Used for CYGNUS
I used it on my CYGNUS, which I bored up to 158cc.
CYGNUS and BWS are helpful because they have many common parts.
By changing to Cell Motor Grounding Wire or Lithium ion battery, the voltage was increased and there was a possibility that the OEM Cell Motor could run. However, the cost performance was not good, so I decided to replace the Cell Motor.
Replacement is easy, just remove the helmet in, unplug the OEM cell motor and replace it with this product, so you only need to remove and install about 3 bolts.
The effect was very large, and the cell motor started to turn vigorously.
After that, we also incorporated High Camshaft and High Compression Head, and were able to use them without any problems as long as they were less than 160cc.
I am currently replacing the motor with another high power engine starter motor, but I think 160cc is enough to easily boost up the engine without spending too much money on oil cooler and suspension. I think the cost performance of this product is very good.
It looks good in Race ish and Parenthesis, and it is cheaper than OEM Cell Motor, so you can use it as a replacement for Normal engine vehicles.
View detail
Fits: YAMAHA Majesty S, YAMAHA Majesty S, YAMAHA SMAX, YAMAHA FORCE 155, YAMAHA SMAX
It's well-made, though.
The construction is good, but the fins inside are a bit small. I should have chosen the Black color… View detail
This is a small, stylish mirror.
I installed these on my CYGNUS X. The OEM Mirrors have excellent visibility, but I was a little cautious when passing through, so I replaced them with the smaller Mirrors. The OEM mirrors were very visible, but I was a little concerned when passing through, so I switched to the smaller mirrors. I would recommend this product to anyone who is considering customizing their mirrors. View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
Reduced wrist strain
Unlike the OEM, the accelerator operation without grip return is great. It seems to reduce the burden on the wrist! It's hard to see, but there is an Axel opening scale, which will be useful for setting the fuel condition. View detail
Fits: YAMAHA Jog 100, YAMAHA jog, YAMAHA jog, YAMAHA YV50 Z II, YAMAHA JOG Zr, YAMAHA JOG, YAMAHA Remote controller jog, YAMAHA SUPER JOG ZR, YAMAHA SUPER JOGZ, YAMAHA APRIO, YAMAHA APRIO, YAMAHA JOG90, YAMAHA APRIO
Cost performance is high
[How is it used?
SilverPlating Engine Cover (BeltCase cover) I also changed the kick pedal to a SilverPlating one to match.
Was the one you received as per Image?
The silver plating is well applied, and for 3000 yen, it's very good.
Was the installation difficult?
There is no instruction manual, but just remove the Bolt1 pc and replace it with the OEM Pedal. It's a quick install.
How was your experience with it?
It is good that the pedal turns round and round without resistance, but the clearance is too wide and it makes a pushing sound, so I disassembled it once and cut the rubber hose short. (Red circle in the photo) In addition, we have installed a small amount of This provided the right amount of resistance and prevented excessive rotation.
[Was there anything that disappointed you?
The Pedal part is made of Aluminum, but the Pedal Lurem is made of Silver Plating on Iron, so it will start to rust after a while. （The pedal is made of aluminum, but the pedal lurem is made of silver plated iron.)
View detail
safety first
The blinker, tail lamp and stop lamp are all in one.
I did a lighting test and it was pretty bright.
Lighting test = check as there is no instruction manual
Black=Earth
Red = Stop
Green Light = Blinker
White=Tail lamp
It was
Reason for replacement = Since I have a top case installed, I thought visibility would be poor in the NORMAL state and decided to replace it.
Simultaneously for Front (with position lamp) I've also bought a new one to make it even safer. (=^・^=)
Wiring is a hassle, but safety comes first.
I'm not sure if this is a good idea or not, but it's a good idea.
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
shackles increase koso
"The product is very beautiful, carefully packaged, the goods are still intact, no dents
Item as shown in the picture, fast delivery, on the date announced on the web
5 stars ------------------------------------------------ ---------- The product is very beautiful, carefully packed, the goods are still raw, do not submark
goods like pictures, courier, on the day announced on web
5 stars
View detail
![KOSO Universal Exhaust Slider [Gold]](https://img.webike-cdn.net/catalogue/14762/02060103_51112d59a6fc5_TS.jpg)
Grom JC61 '15
Used for Grom JC61
I bought this for the guard of my Yamamoto racing muffler in case of falls.
The Bolt that comes with this kit or the Bolt on the Yamamoto racing muffler is not long enough, so you can use a Bolt that is 10mm longer.
If you want to add color, you need to make it longer for the color.
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA BWS125(BWS), YAMAHA BWS125(BWS), YAMAHA BWS125(BWS), YAMAHA BWS125(BWS)
I want to cancel the Pulley holder, but I don't know how to do itCancellation
Please call me as soon as possible so I can cancel. View detail
Fits: YAMAHA Cygnus X, YAMAHA Majesty 125, YAMAHA BWS125, YAMAHA BWS125X, YAMAHA Axis Street, YAMAHA S-MAX, YAMAHA Majesty S., YAMAHA Vino 125, YAMAHA Bino Bianco, YAMAHA Vino Bianco R, YAMAHA NMAX125, YAMAHA NMAX150, YAMAHA NMAX155, YAMAHA SV-MAX, YAMAHA AEROX125, YAMAHA AEROX155, YAMAHA FORCE 155, YAMAHA Tricity 125, YAMAHA Tricity 155., YAMAHA Cygnus SV
parts exchange
It seems that most of the Motorcycle shops near me do not stock Scooter parts. Webike has a large selection of parts and you can choose the part that best fits your motorcycle. This time I chose Racing weightRoller. Now it is easy to ride. View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
And the glimpse it gives is GOOD!
I changed from OEM to KOSOLogo when I was doing maintenance on my drivetrain, the OEM gasket was completely seized when I took it off, but after I changed to KOSOLogo, the crankcase was easy to remove. View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA BWS125(BWS), YAMAHA BWS125(BWS), YAMAHA BWS125(BWS), YAMAHA BWS125(BWS), YAMAHA CYGNUS X, YAMAHA CYGNUS X
Just replace it with Race ish
As expected "KOSO RACING PARTS" I was wondering if it would look so race ish just by changing the color and the Hose of OEM. Hose Holder of KN project as well (Gold color) It's also a good match for View detail