Reviews
For BWS 125 SEA 6 J
I purchased Gun meta.
I think installation is easy with electric Drill.
I installed it with M5's Aluminum tapping screw instead of Screw attached but the hole was Small so I made Large with Drill.
I think that it is quite good feeling.
View detail
For BWS 125 SEA 6 J
I tried replacing Air Filter.
Personally I could not feel the effect. It may just be dull!
It may be good to attach BigSizeAir cleaner duct.
The work is easy, just remove the OEM Product by hand, just put this product in the direction.
View detail
To BW 'S 125 SEA 6 J
I inadvertently dropped the Tire and had a hard time restoring it
If you carefully work Large is strong.
What is the effect if you try rolling?.
View detail
BW'S125 (SEA6J) To
I tried impulse purchase.
I got lost at the mounting position and fixed several times to fix the position.
Since the length of Bolt was short, I went to buy at Home center and installed it.
Exactly good with M8 80mm.
View detail
BW'S125 (SEA6J) To
I tried impulse purchase.
As BW'S, Center will float a little, so we added Double-sided Tape and coped with it.
Someday I'm afraid I'm going to fly - - - - -
I wonder if it feels good!
View detail
Since it has become a mileage which makes me feel uneasy soon - - -
Actually, I wanted a Digital Voltmeter from another company - - -
Along with lack of items, I bought this.
But - - - Will this short Wiring is not it?
Perhaps with Cowl it may be premised that it will be interrupted from Light harness etc. near Headlight - - -
Because my vehicle has aged deterioration, slightly light harness is seen as voltage drop
We extended Wiring to take from Fuse which is almost the same as the generated voltage.
I wonder whether it is called StartUpDemonstration Tray with Key On?
Hey, I reviewed it ♪ ^^;
Although it is the display error of the item you care about, there was no numerical error when measured with Tester.
The night is beautiful like the photo ♪ - - - However, it may be hard to see with reflection in the bright daytime
However, I do not run by looking around all the time and it is ok if there is no display error.
View detail
To those who want DownForce of the story
It's like Wing, which has more to see with motopGP. Installation becomes Tape.
Small tribute Wing so I can not recommend it for those who want a large Large.
Performance is also like a parody product so I do not think there is anything.
A good point is that it can easily be imechen and can be a part of conversation within a group.
Because it is cheap, I think that those who are worried will not regret even if they buy it. Do not expect excessive expectation.
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
As expected a product with many users
【What made you decide the purchase?】 Because it was RACINGFilter at this price.
【How was it actually used?】 The inspiration is up compared to the NORMAL Filter.
【Was it difficult to install? (Hard parts case)】 Just remove the NORMAL Filter and replace it. it's simple.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Anyone with Driver can do it.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
[Is there anything I was disappointed about?] None. The roughness of the eyes is different Quantity : 1 Set of 2pc. It is good deal.
【Hope for Manufacturer - Please tell me if there are any improvement points】 No particular.
【Have you compared items?】 nothing special.
[Others] Even if you add Cover you will see the Red color of the Filter itself so you will get a sense of Custom!
View detail
Fits: YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA CYGNUS X, YAMAHA CYGNUS X FI
Mounting on CYGNUS SE12
I was commuting to work 30 kilometers each way, and my wrist became tired, so I made it into High Solo.
Installation attached and it attached without problem. (No processing) But!
This product is to understand the opening degree of Axel, but it does not look when actually installed.
There was something like Memory 's Guide - Plastic, but because it interferes with the Switch box,
I removed it.. You can install it if you scrape between Holder and Box, but I have no time to look at Axel opening, so I thought whether it was good for NCY or High Solo from AdvancedPRO. (I simply chose KOSO because I liked it)
As for operability it became easier to get on.. Even without bending the wrist so much, I opened it for a while and it was 60 o'clock in no time
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X
As a guide for Setting
I changed the Exhaust System and set it up on the Sub computer, but I wanted a visible standard because it was Setting with sense only. When considering installation of the air-fuel ratio meter in various ways, most of the things that weld the boss by drilling holes in the Exhaust System were mostly used, but there was a Meter that measures the air-fuel ratio using the OEMO 2 Sensor made by KOSO To purchase
【Items】
- The Harness length of MeterBody is 570 mm, SensorHarness (Intermediate Harness) Is as long as 1210 mm
- Black patch attached to Meter's Left. I thought it was a Button, it was just decoration
- It seems like Waterproof Specification when looking at the standards, so do not worry about sudden rain. However, it is not Completely Waterproof so it is not flooded
- It was so poor that the Loop side of the attached Magic tape was really M3, so I just replaced it with another Magic tape only on the Loop side as it was scratched just peeling from the mount
【attachment】
- Taiwan Manufacturer's Meter, but since it mediates the import agency, Instruction Manual translates (fill in here. Installation is also easy work to take Plus and Minus. If it matches even the Coupler shape of O2Center, it can be attached to other models. Worst, replacing Coupler with fingering Wiring extends the corresponding model
- Since SensorHarness was long, it was not used, and the connection Harness which was separated from the O2 Sensor side Coupler and newly rebuilt (For O2 Sensor) Transplanted to
- If Wiring's Size from Meter is 0. Since it was as thin as 2 sq, we used the same thin coupler as the O 2 Sensor side. The power source was diverted from the Harness of the Temp meter that was attached earlier
- I fought variously for Wiring, but it started up without problems with key ON. If you finger it, please take self responsibility.
【accuracy】
- Checking Meter after Engine warms up. Numeric values ??range from Idling to 12. It is going up or down near 5, and when it is AxelOFF it is displayed as thin as 16 ~ 17. When stopping the Engine and looking closer to the Exhaust System, the odor of waste gas gave rise to the nose and the eyes also grazed, so it seems that it is dark
- I tried running without correcting Sub computer. As I opened Axel and accelerated, the numerical value remained unchanged from 12. 2 and a deep numerical value was pointing, but when I tried running, it got steady and it changed quickly 13 to 16. Of course, Axel is fixed
- Next, we will change the Plus correction to Base, the medium rotation range to Minus, and aim at the economic air fuel ratio. When running, the numerical value is 14. It became thin and became stable as 7 to 16, but it is still severe even if you switch it as soon as possible to make it a guide if you can not boil down a little more. Exhaust gas odor from the exhaust system also became thin
【Review】
- In the information examined beforehand, there were many writes that the numerical value did not stabilize, but since it was unexpectedly stable, it was Big Li. Just being stable was up to 13 dense cases, and conversely if it was 13 or more the number would change to RoseRose. Since OEMO 2 Sensor is used, the figures are approximate, but it may be good for setting judgment
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
inhale.
Along with the replacement of CYGNUS's WJSnakeCone Exhaust System, we chose a wider surface area filter with an outside filter for inspiration Up.
Tighten your eyes, Torque up the whole area and make the high rotation extend. Turn it and have fun ~
View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus Z, YAMAHA Cygnus Z
For safety!
I installed it aiming for safety up.
We installed for nighttime to improve the visibility from the car.
It stands out considerably. Therefore it is seen twice on the same CYGNUS ride.
It became like a Decoration tiger. Lol
View detail
BW'S125 2016
Somehow I tried arranging with three Blue.
The difference in color is tearing my eyes.
Installation takes 1 minute if there is a tool.
The reason for purchasing is to make the Gold amount for free shipping.
View detail
KOSO voltmeter
After Battery punctured twice by regulator overcurrent, it finally started to install the voltmeter by raising the heavy waist.
I was thinking of Small type that does not take Space so I made it this product made by KOSO.
Since Wiring was not so long and I wanted to set it around the Speedometer, I installed Wiring from Position light in Headlight's Case.
If you put one difficulty, you can not branch well because the Wiring of the voltmeter is thin in the attached Electro Tap.
It will certainly cause poor contact.
This time I cut the Wiring of the Position ball and split it with the Flat Terminal.
If you manage the voltage so that it is always visible, you feel relieved confidently
With this, BatteryPuncture at the destination can be prevented beforehand.
View detail
BW'S125(SEA6J)
Although it seems important to look good, I think it's quite good.
BW 'S 125' s Blue Wheel is also good in color.
Parts of the new BW 'S 125 are still few so I tried something.
View detail
Fits: YAMAHA Cygnus X, YAMAHA CYGNUS X
At the foot of CYGNUS X-SR
【What made you decide the purchase?】
Scooter is a standard Custom at the base.
【How was it actually used?】
Custom feeling comes out well. Satisfaction is high.
【Was it difficult to install? (Hard parts case)】
It takes no time if there is an Impact Driver. It's easy..
【Please tell me the point of installation and hang (in the case of Hard parts)】
There is no special difficulty if you straighten Screw.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
[Is there anything I was disappointed about?]
It can not be helped because it is made overseas, but BALI ...
【Hope for Manufacturer - Please let me know if you have any improvement points]
Is it okay for BALI to be processed?
【Have you compared items?】
There is none
[Others] Because BALI processing is sweet, I cut my finger. Recommendation to do gloves when working.
View detail
Used for oil temperature control of PCX 150 (Oil panDrain)
Using Wiring bent 90 degrees from the base, about half a year.
Temperature of Display has come to rise and fall. The last is no longer displayed.
As a result of examination, the covering of the Wiring at the base of the sensor was cracked and the line was exposed. It seems that I shot by vibration.
There was also a choice to repair with solder, but I exchanged it because it is cheap w
I use the root fixed with liquid Gasket.
What will happen after six months - - -
View detail
As you intended
Twin Light Lights up + Since power consumption is rising with Grip heater,.
As expected, this thinness is good.
Other Digital meter looks very bad because the thickness becomes 1 cm or more.
This is Simple, it makes it clearer.
The voltage at the bottom is the same as the value measured with Tester, so authenticity also seems to be Large.
Actually Battery Directly orRelay may be good, but I tried putting it in Horn 's Line easily.
For measurement with Battery direct connection 0. Although I can not say that the voltage drops by about 3 V at all, I think that there is no problem as a guide.
There was no problem because the visibility was red when it was not visible in the day during the day.
View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus Z, YAMAHA Cygnus Z
I think it is good for cheap.
I think it is good for cheap.
If I do not dislike such a thing, I feel like a good Accent. It's beautiful, so why is it OK to be White.
View detail
Convenient dish
It is decisive that the functions you want just wanted, such as watch and voltage, are consolidated.
It is a bit bothersome to always keep the power supply, but Wiring itself is easy.
By turning on the key, you can set the voltage automatically, switch to the watch automatically after a while, set low voltage, high voltage Alarm etc. , Usability is good.
Regardless of daytime or nighttime, good visibility that you can check numbers even through the Smoke Shield is recommended.
I think that there is no problem, since I was concerned about the Waterproof part where Wiring comes out from Meter, I added Coking by myself.
Other than that, Slim think that the mountability is also good.
View detail