Reviews
Easy to read and check the water temperature immediately
Installation is easy because it is a MAJESTYS exclusive product. 。
I installed it on my AdvancedPRO Bracket. 。 Very easy to see during the day and at night. 。 I'm worried about the water temperature control especially after Bore up, so this is a relief.
View detail
It looks alright!
First of all, as for installation, it becomes necessary to process with Cutter Knife etc. to the NORMAL parts. Because the GuideTape for that is attached, it is traced and the incision is put.
The installation is Double-sided Tape, but it was good if I installed it temporarily and cut off the unnecessary part because a little extra part is generated.
Wiring connection was easy as I just had to bite the Coupler.
View detail
![KOSO Universal Exhaust Slider [Silver]](https://img.webike-cdn.net/catalogue/14762/02060121_5111317d1c514_TS.jpg)
Good
I installed it on CYGNUSX (1YP2). I crashed a little while ago and installed SP Tadao's Exhaust System pretty well.
I scratched it, and installed it just in case I had to replace the Exhaust System.
There are many screws and two colors. I don't like them sticking out too much, so I chose No Color.
I installed the exhaust pipe and Slider, there is not much room for clearance with the ground and Slider
I think I'm going to add some color to it.
I think the design is good without looking bad, but it would be even better if the price was a little lower.
View detail
If you do not directly wire from the Plug side of the No.1 Plug cap, it will malfunction.
It was installed together with POSH ETC Bracket Type?
URL → https://www.webike.net/sd/2091470/
Note that if you don't wire directly from the Plug side of the #1 Plug cap, it won't pick up the rotation properly.
Wiring from the #1 Plug cap side picks up the rotation pretty accurately.
The video shows this product in the hand of LeftHandlebar at the time of FZr1000 love car introduction.
View detail
Fits: YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA CYGNUS X, YAMAHA CYGNUS X FI
Just Right High Solo
'07 Used for SE44J
The shoulders don't drop like the OEM, and you can fully open Throttle with just the Limit wrist.
I was expecting to be able to open it all the way with just my wrist … so right after I put it together, I thought it could be a bit more High Solo.
When I thought about the time when my body bounced on the rough road surface, I reconsidered whether this much was just right.
For better or worse, this is the High Solo condition that I wish was OEM….
The machining accuracy is good and the installation is smooth.
The needle of the Indicator interferes with the Switch area, so it needs to be shaved a little, but that's about it.
Also, it's been about a year since I installed them and I don't notice any fading of the RedAnodized.
In general, I was more than satisfied with my expectations.
View detail
I don't ride in the rain.
I want to tell myself that it is Large strange on a rainy day.
But I'm also very happy with the Stylish look of the Back lol.
View detail
![KOSO Universal Exhaust Slider [Black]](https://global.webike-cdn.net/photo/impression/69/692f72988630ac60ecc5dc11eb8145ebL.jpg)
I'm a little disappointed that I haven't scratched that itch.
[How is it used?
Currently in use after installation.
Was the one you received as per Image?
I was surprised to see that there were more bolts and colors included than the Image, and that the instructions were well written.
Was the installation difficult?
It's easy to install, but as you say, the Bolt length is too short to be effective as a Slider.
The Bolt is available in two sizes, 40mm and 60mm for both M8 and M10. I thought it was kind, but the length was not enough to fix the top of the exhaust system via Bracket, so I had to extend it.
I measured and installed 95mm Bolt and φ22×14mm Aluminum Collar after purchasing them separately.
How was your experience with it?
The existence itself is wild, but in the unlikely event that you think about the cost of replacing Silencer, on the contrary, it's starting to look cute! (Lol)
The effect of Slider is unknown because it has not been verified yet.
[Included Parts:were they on?
For M8Bolt, collar and conversion collar included.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
I hope Manufacturer will release Long boltType or SliderSingle Item only with lower price separately from this product.
View detail
Wiring tools and parts required
I used it for CYGNUSX (1YP2).
The LEDBlinker worked fine. The point to note is to use 3 poles and to take Earth without fail.
I think it is a good product with excellent cost although the wiring needs to be processed.
View detail
Fits: YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA CYGNUS X, YAMAHA CYGNUS X FI
You need to understand the structure and build it properly.
I chose the CYGNUSX-SR for commuting because I wanted to convert it to High Solo and make it easier to use Axel's AssistLever.
About installation
The machining accuracy of the product itself is fair to good.
Pin for rotation prevention is attached to the Holder, so it is easy to position the Handlebar.
If you install it by yourself, we recommend that you look at the NORMAL installation position carefully before you start.
In particular, the positional relationship between the play, pull and return of the accelerator wire and the position of the screw.
Basically, these parts can be installed without any modification.
Material:The aluminum throttle sleeve has a two-piece structure with the sleeve and the plate of the Thailandco part that hooks the wire, and is screwed into one part.
You need to be careful about this. If you twist it more strongly than necessary in the fully closed direction, it will loosen. So I fixed it with screw lock material and reassembled it.
About the feeling of use
The Axel operation is a little heavier now that it's in High Solo, but I feel it's acceptable.
You can feel it when you back off the throttle.
The gauge that shows the opening degree is preeminent in the custom feeling (although it is meaningless in the injection car).
View detail
Durability unknown.
The Large type box of the Rear is a disaster, and Handlebar runout occurs at the time of the headwind and acceleration, and it becomes a situation to think about countermeasures.
Impressions of our predecessors made it somewhat better and introduced it.
Big li to open the product.
Do not use it while driving.
Large Is it strong? But deal with it at your own risk.
The result is that the Front's ground feel is somewhat restored; it's best to remove the Rear's Large-type Box or something, but I'm prioritizing convenience, so I guess this is a compromise?
It's a big deal that a toy-like feather has so much meaning.
However, I moved the blinker and fixed it to the blinker bracket because it is a premise for mounting on the cowl.
If it was a straight upholstered surface, I wanted to mount it on a Front Fender or something.
As a Type 2, I'll buy Repeat when they come out with a flat glued product.
View detail
![KOSO Super Slim Style Meter [Voltage / Watch] Blue Display](https://img.webike-cdn.net/catalogue/14762/07192156_51e9376e7c973_TS.jpg)
If you just want to know the voltage and the time.
I also want to know the time. I also want to be able to see the voltage.
I was looking for a little Monitor and found one with just two features.
I installed it on my Yamaha Max star125.
I've bought this kind of product before.
Instead of a Button attached to the Body, it had a separate Button that could change the voltage and clock when pressed.
It has a good amount of light and is easy to see during the day.
Wiring is not difficult, so installation was easy.
View detail
Fits: Others Universal
Stroke is a perfect fit.
Some of the other extended Chalks have insufficient Valve retraction space and blocked the air passage at ChalkON. This product, on the other hand, has enough Stroke, so I was able to adjust the Spring pressure to push the Gas hole at Chalk OFF and the full opening of the air passage at Chalk ON correctly.
View detail
Repair item
Just because I chose to do this doesn't mean that
It doesn't change anything.
I've heard rumors of a power-up.
It's all in my head!
Think of it as an OEMFilter for Repair and you're good to go
View detail
It's the bare minimum, and the cost is good.
The water temperature gauge on the STREET TRIPLE is Bar type. This water temperature sensor is not equipped with any functions other than water temperature. The water temperature sensor is included in the package, so you can easily install it with the hose joint.
The meter display is red, but I think it's a little hard to see during the day.
The function of the water temperature gauge is a bit worrying when it's so cheap, but so far it doesn't seem to be a problem.
View detail
Used to install water temperature sensors
I bought it to use a Corso water temperature gauge, because the Joint's compatible hose gauges are only 22mm or 26mm, so the car model is limited to install it, but the STREET TRIPLE is 22mm Exactly.
The Joint also comes with a Hose Band, so there's no need to prepare anything else just to insert it into the Hose. It has worked well after installation with no leaks.
View detail
Fits: YAMAHA NMAX, YAMAHA NMAX 155, YAMAHA NMAX155
You will feel the effects.
I installed it on my NMAX125.
Installation takes less than 30 minutes as all you have to do is remove the OEM Air cleaner box and replace the Filter. You just need to decide on the coarseness of the filter's grit beforehand. I chose the coarse one in our case. (If you prefer a finer grit, you'll need to replace it beforehand because the coarser grit is installed from the beginning.) 。
At high rpm range, the punch power is up but the fuel consumption is 2km worse.
View detail
![KOSO Universal Exhaust Slider [Gold]](https://img.webike-cdn.net/catalogue/14762/02060103_51112d59a6fc5_TS.jpg)
It's universal, so the effect seems to be mixed.
I'm using it on my GSX250R.
It was installed in the place where the Exhaust Band is fixed.
You will need to purchase a longer Bolt because the included Bolt is too short to install in the first place.
The effect is so-so and solid that it seems to protect you, but I'm a little worried about it. . You shouldn't trust in Overlarge.
View detail
![KOSO Super Slim Style Meter [Voltmeter / Red Display]](https://global.webike-cdn.net/photo/impression/ad/ad348877d03333784e00f0ce4d58a228L.jpg)
It looks good, but …
I bought it because the voltage of my Motorcycle was unstable
Looks and visibility is good, but the Cable is too thin
Crimping is not a good idea if you don't have a solid solder on it It can be
By the way, the enclosed Adapter for interrupts was not useful
View detail
Good
Because Cooling fan has been lightened, under Seat at this time of the year, it becomes hot immediately It is Because it is troublesome to return Cooling fan to NORMAL by the season, I decided to purchase it It is not a long distance, but Seat which had become hot on the way to work is not a concern so much after installation It's gone View detail
Sequential is good
I bought it because it's not a white surface for OEM with a Fender Eliminator
I'm still satisfied with the amount of light in the daytime, unlike the cheap ones
EMark for peace of mind
Resistance is mandatory for SC77
View detail