Reviews
Broken by a single shot
Installed, set up, broken at the same time as Engine started Battery Voltage 13. 8 V Regulator output voltage 14. 5V PickupCable is Shielded so as not to pick up Noise except winding part I tried to process returned goods Where is Big Customer Support Where is it? View detail
Design and make-in are good - - -
Purchase to match BirdCity.
On the design of the car body I chose the pointed-looking design thing I chose.
The product arrives, the impression when opening it is solid, Instruction Manual (English Version) It was not a bad impression clearly understood.
Since installation is Mirror, there was not any difficulty in particular.
Surface Material is resin and sunburn is a little worried, but self assertion is not too strong, I think that it is good for private.
I'm satisfied that I miss sharp design with the car body.
Although there was Impression that vibration is worrisome, although it certainly feels that there is vibration while stopping, I felt that it is not caused by Mirror with thing unique to the car body.
There is nothing to say that the rear can not be seen with vibration during running, so you can see it steadily.
If I firmly tighten the Joint, I've never told you a lady.
Although it seems to be important, this Mirror is expanded Large and appears Spec. Because it becomes, care must be taken since the rear view is not so wide coupled with Size of Mirror face.
However, since freedom of adjustment is relatively large, I think that it is good to adjust frequently.
That is where I told you that Cool will allow it!.
Just a little price is high - - - I think.
View detail
I'm sorry
I used Large rain at around 2 months of use and it broke down. As expected, it is useless unless it is Completely Waterproof! It is very disappointing because it was very easy to see and the installation location was not bothering me. View detail
As expected, good.
Originally because it is a vehicle without Tachometer, I chose it with Cost.
I was worried a lot about the installation place and fixation method, but it is also fun.
It is still 3 months to install, but it is very good, after that it is a lifetime while using!
View detail
![KOSO Kick Pedal [Cub Monkey Series]](https://img.webike-cdn.net/catalogue/14762/09072002_5049d44b3fab4_TS.jpg)
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA cub, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA cub
Sounds good!
I installed it on SnakeMotor's K-16.
Originally NORMAL shoveled, it broke soon, so I bought it,
When exchanged, the length of Cable was shortened by the length of the Screw part for play adjustment and it became Limit.
View detail
![KOSO Super Slim Style Meter [Voltmeter / Red Display]](https://global.webike-cdn.net/photo/impression/6c/6ce440cb477693a54fb043bd71b43f36L.jpg)
USB etc. SmallEngine Displacement Volume to Voltage Check at Power Supply Addition!
125 SmallEngine Displacement Volume As we added USB and auxiliary lights to the car, we will purchase Battery's voltage check for easy management!
The price is affordable, even in the case of Small while Large Kimono, Red number display and visibility is no problem at night.
Just like waterproof seems to be not so, if you set it in a sudden shower when it rains, Large is durable!
Power supply is Light and Hornetc. It seems to be retrieved with Wupping 's attached from Wiring, but because it hurts Wiring of NORMAL, it should stop NG!
I took it out of my own Extension Cord for auxiliary light.
View detail
![KOSO Universal Exhaust Slider [Silver]](https://global.webike-cdn.net/photo/impression/8d/8d7324161f7f611c39746a2a84296c5aL.jpg)
We will protect Silencer by standing gobble!
In my Motorcycle history I felt that the stall of the stall was 1, the slope road parking Neutral, the STAND off going out one time, the other car fallen overwhelmingly once, a fall in the corner ring, a collision with Truck... Opponent getaway... Conviction at trial!) Once. Well there were many.
Each time Motorcycle gets scratched.
The Engine side has a Babyface Slider, but if it is only that surely Silencer will pass away...
I bought this product by that.
SilencerQuantity : Quantity if there are 2pc : 2 Set necessary.
Attached is M8 × 40 M8 × 60 M10 × 40 M10 × 60 Bolt and Color.
Ninja 1000 is just right for M10 × 60.
Color seems to be Silver, Black, Gold, Orange, Blue, Red.
This time Silver. It fits well with the car body.
I do not want to take care of me, but I feel secure.
Although it can divide the pedestal and the resin part, can not purchase only the resin part or stated, so it is not reusable?
Would it be okay if it was an integrated type?
Not good for resin molding. BALI BALIBALI. MORIWAKI's Skid Pad was awesome. MotorcycleParts looks great in Large things. Aluminum grinding is nice though it is nice feeling.
View detail
It does not suit 10R
It is Wing-like Parts used in MotoGP Machine.
Easy Custom parts that anyone can stick with Double-sided Tape.
Although it was nice to order in a strawberry, but when you tried to put it in, it did not suit you as much as 10R. I mean, this Motorcycle 's Cowl looked quite complicated.
I try painting colors, I tried changing the shape, but after all there was no place to wear that I liked, it is already entrance.
There was a person wearing around Headlight at R25, but it suited him very well. It is ant because the price is cheap also thinking after buying it.
View detail
It can not be helped if it is Universal
I just bought it before I got out already
For motoGP after 2 weeks
I bought it.
To fit the rounded surface of the product
There is not a nice place for 12R Cowl to install
To the picture point without ginger
Because the texture of the product is Plastic Bodied
If it is painted with Spray it is too cheap
There is no power like motoGP
It is awfully small, but Big Li
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
I can not go back but the best Neck
After drilling to Air Cleaner Box, open with Large in Drill
We expanded Large while fine-tuning.
2006 year model Carburetor Vehicles CYGNUS X. Installation did.
As the setting situation
- Exhaust System WIND JAMMERS (CoilCone Exhaust System)
- carburetorOEM Main jet#120
- Air Filter Mukawa Filter
- Drive system KN project Torque shifter 7. 5 G × 6 pieces
In the setting above, Torque is better at the Level which can be experienced as a whole.
View detail
Imechen effect Large!
I tried purchasing.
The first impression was that it was smaller than I thought.
Because the mounting surface is curved, depending on the type of vehicle it may be that the surface may not fit.
Also, as I was worried that the installation with Double-sided Tape will peel off when receiving wind pressure
(I think that there is no way to think about safety) ,
I cut it and put up FRP and use it by machining so that Screw can be stopped with the current car matching shape.
View detail
NORMALInjector, almost the same etc. !
It is the same as when the value of the AF meter is NORMALInjector, and there is no change, the color of the resin part is the same. After Bore up, it is better to choose one with 160 cc. View detail
![KOSO Universal Aluminum Hook [Blue]](https://img.webike-cdn.net/catalogue/14762/10110155_5075a89403924_TS.jpg)
Taiwan quality
Processing finish is miscellaneous and Anodized, but there are scratches peeling off.
Two kinds of Screw are attached, but it is made of iron attached to the magnet.
Convenience Because claws hanging bags are long, there is no worry of coming off.
View detail
Used to divert to CRM50 of Digital Maker's Sensor made in China
Meter was also funny at Restore of immovable CRM 50, so purchase Meter similar to Grom at aliexpress.
Because the MeterSensor is Magnet and the scaffold to attach the Sensor itself was not around the CRM 50 Front Disc "What should I do?" Just thinking and searching for Net happens to find "Can you go?" I bought it for that.
Depending on the Screw diameter of Sensor, what I used was entered in Limit.
Because Material is Aluminum, I think that it can be processed to a certain extent for the small diameter part.
There are also three holes, you can choose the position you want your Sensor to place relatively, and you could also fix the Sensor with a disc with a width of about 1 mm with Limit.
Screw is finally fixed in the vertical direction, Limit is also loose and I think that the possibility of interfering with Wheel is low.
Bracket itself just puts a stay on the Rubber foundation and can be fastened with Tie Wrap, but without slipping, the strength is OK and I think that it can be fixed in a favorite position of the Front suspension.
It is cheap, and on the contrary it will be necessary to shop extra to make it free shipping, but is not Bosch's own cospar?
View detail
To the intake system Custom!
MAJESTYS Intake system is the first Custom. I got the Custom before because the Racing Air Filter arrives.
OEMDuct 31. 5 mm, KOSO 35. It will be 2 mm. So you need to extend the air cleaner 's Duct plug - in with lutar etc.
Extensions themselves are not difficult at all, I think that they can handle files etc.. If you use it with outside Air Filter I think that the intake volume will be increased to the Large width. I recommend you to those who dislike Silencer type Air cleaner and those who like OEMAir Box.
Since the amount of inspiration increases, there is description to do Setting and OEMFilter does not need it. However, changing to Other Company Product seems to be better setting up.
View detail
Well
I purchased it as thought it was necessary when I purchased a voltmeter. Size is considerably bigger than the voltmeter and it is a bit disappointing. Making is so so. Slightly satisfied as the price is cheap. View detail
![KOSO Super Slim Style Meter [Voltmeter / Red Display]](https://global.webike-cdn.net/photo/article/19/1452824883219L.jpg)
Unexpectedly, easy!
As I had seen on some HP this time, I decided to bite Wiring of Small lamp.
Originally, it is most likely to bite into Ignition, but Wiring from Body also did not reach the Fuse box with subtle Length, so it's a connection inside Headlight that Waterproof can also do.
If you can verify that it works properly, after all confirmation during the day is painful in Red.
However, since the body is Red at V7Racer, I think that I was good enough on my own.
I will not check while driving, if there is no problem as long as I know the voltage.
View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
I installed it in 1YP.
Cowletc. Is like a puzzle so decomposition up to where Cylinder head can be removed was Large strange.
Locker Arm interfered with the Cylinder head so that it was in attention. It took time to find the interfering part, but the interference part became problematic if it cuts it by Router for about 10 minutes.
We did fire, but it was cold so I gave it up properly.
I feel like I feel better racing around 8000 rpm.
Attention is required for m and cm of Torque notation of attached Instruction Manual.
View detail
For grasping the state of the Engine
As the Large type air-cooled Motorcycle, the temperature of the engine, especially in the summer, became extremely high, and it purchased and installed for the purpose of grasping the state.
As for installation, I did it myself at home Garage.
Thermometer of Engine oil (Oil Temperature Gauge) I already installed, but in some cases I got up to 130 degrees and so on, I was worried, but installed because the hydraulic pressure is more important than the temperature.
Sensor sandwiched in Element section.
Installation itself is not particularly difficult, but the problem is just a Digital meter, ○ ○ Because there is no such information as Large Yui is more numerical than Large, I also needed to study myself, like listening to OilManufacturer.
I could not get clear answer even if I contact Honda.
View detail
For coza
If you completely remove it
Although the intake sound becomes quite Large
With this Big Size Air Cleaner Duct
It can be quite suppressed
City ride Spec. If
I think that it is not enough to worry
View detail