Reviews
![Mini4 Digital Air-Fuel Ratio Meter [Narrow Band Type]](https://img.webike-cdn.net/catalogue/images/53629/KS-M4-AFN_01_TS.jpg)
I will cancel the confirmation of the gold deposit because it has been too long.
Too late to confirm entry Gold (● Translated by ε´●) View detail
Parenthesis will be better
[How is it used?
It was installed in exchange for a NORMAL Silencer cover.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It was not difficult. Even beginners can do it.
How was your experience with it?
It just looks different, but Parenthesis is good and satisfying.
[Included Parts:were they on?
KOSOLogo stickerQuantity:I'm glad it came with 1pc.
[Was there anything that disappointed you?
None
View detail
Highly effective in preventing mud splashes
There was an 85mm gap between the OEM Mud Guard and the inner fender, and there was a lot of mud splashing from that area.
The License Plate and Top case get dirty when driving in the rain, and I was looking for something better and found this product.
This is a dedicated product, so it can be installed without any modification.
If you are not concerned about the torque, you can install it with only a 4mm and 5mm Hexagonal Wrench, and the work time is about 10 minutes.
In the photo, the hexagonal hole has a plug, but the plug is not included.
Surface is Carbon Style PP (Polypropylene) Made of.
The OEM Mud Guard has a reflector, but this one does not, so you will need a separate license frame with reflector or a reflector that can be tightened together with the license plate.
View detail
Fits: YAMAHA Cygnus X, YAMAHA BWS125(BWS), YAMAHA BWS125(BWS), YAMAHA CYGNUS X
Same as OEMPacking, no worries.
I bought it with the intention of replacing it with a KOSO Crank Case Cover at the same time, but the Crank Case Cover is missing, so I will replace it after that since the Crank Case Cover will be available in mid-May. View detail
Fits: HONDA Livedio ZX AF35, HONDA Livdio <Compatible model number> AF35-1000000-2199999 <Compatible model> SK50M(M), HONDA Livdio J <Compatible model number> AF35-1000000-2199999 <Compatible model> SK50M(V), HONDA Livdio <Compatible model number> AF34-1000000-3299999 <Compatible model> SK50M(M), HONDA Livedio <Compatible model number> AF34-1000000-3299999 <Compatible model> SK50M(V), HONDA Livedio <Compatible model number> AF34-1000000-3299999 <Compatible model> SK50M(T), HONDA Livedio <Compatible model number> AF34-1000000-3299999 <Compatible model> SK50M(S), HONDA LIVEDIO CHESTER <Compatible car body number> AF34-1000000-3299999 <Compatible model> SK50M(T), HONDA LIVEDIO CHESTER <Compatible car body number> AF34-1000000-3299999 <Compatible model> SK50M(S), HONDA LIVEDIO CHESTER <Compatible car body number> AF35-1000000-2199999 <Compatible model> SK50M(Y), HONDA LIVEDIO CHESTER <Compatible car body number> AF35-1000000-2199999 <Compatible model> SK50M(M), HONDA LIVEDIO CHESTER <Compatible car body number> AF34-1000000-3299999 <Compatible model> SK50M(R), HONDA LIVEDIO CHESTER <Compatible car body number> AF35-1000000-2199999 <Compatible model> SK50M(V), HONDA Livdio ST AF35 <Compatible car body number> AF34-1000000-3299999 <Compatible model> SK50M(M), HONDA Livdio ST AF35 <Compatible VIN> AF34-1000000-3299999 <Compatible model> SK50M(V), HONDA Livdio ST AF35 <Compatible VIN> AF34-1000000-3299999 <Compatible model> SK50M(Y), HONDA LIVEDIO CHESTER <Compatible car body number> AF35-1000000-2199999 <Compatible model> SK50M(T), HONDA LIVEDIO CHESTER <Compatible car body number> AF35-1000000-2199999 <Compatible model> SK50M(R), HONDA LIVEDIO CHESTER <Compatible car body number> AF35-1000000-2199999 <Compatible model> SK50M(S), HONDA Livdio ST AF35 <Compatible VIN> AF35-1000000-2199999 <Compatible model> SK50M(Y)
A little expensive, but this is good.
Clutch springs are very easy to replace.
You can also adjust the tension with the Adjustment Screw, "A little more" You can also adjust the
It's a little expensive, but it's useful.
View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX125, YAMAHA NMAX155, YAMAHA AUGER, YAMAHA FORCE2.0, YAMAHA X FORCE, YAMAHA BW'S125, YAMAHA CYGNUS Gryphus, YAMAHA CYGNUS Gryphus
Exhaust system is changed so intake air is also changed.
Installation was easy and two types of filters were included to match the Engine's TuningStyle. View detail
จัดส่งรวดเร็วการแพ็คสินค้ามาดีมาก สินค้ามาถูกต้อง ไม่ผิดออเดอร์ ออเดอร์อะไรไป จัดส่งได้ตามที่ต้องการ และรวดเร็วอีกต่างหาก View detail
Fits: YAMAHA GRAND AXIS, YAMAHA VOX, YAMAHA VINO, YAMAHA JOG, YAMAHA GEAR, YAMAHA VINO, YAMAHA APRIO, YAMAHA JOG50, YAMAHA BWS50, YAMAHA BWS50, YAMAHA Old JOG, YAMAHA Old JOG
Just receive item
Second time order from webike..the quality of packaging still tip top for me with the bubble plastic and so on..well order again in future..thank you View detail
Looks cool.
It looks cool, but the overall texture is cheap.
The Arm section has a lot of BALI and it's getting White in less than a year.
Mirror itself is light, so it absorbs vibration and Mirror is small, so it is hard to see.
Mirror's large size cannot hide a 78mm circle, so it does not meet the safety standard and may be said to be poorly maintained when you are caught.
View detail
Fits: YAMAHA CYGNUS GRYPHUS, YAMAHA CYGNUS GRYPHUS, YAMAHA CYGNUS GRYPHUS, YAMAHA NMAX125, YAMAHA NMAX155, YAMAHA X FORCE, YAMAHA FORCE2.0
Somehow.
It's just a replacement, because I can replace it with 3 Screws. View detail
Fits: SYM MMBCU, YAMAHA X-FORCE, YAMAHA FORCE 2.0, SYM DRG
Front Fender feels longer and is replaced.
The product feels less durable than OEM.
Just the right length of Fender that I was interested in.
Self-satisfaction
View detail
![[Rough Craft ION] Ultra-Small LED Blinkers](https://img.webike-cdn.net/catalogue/images/105463/09150249_5f5fad1a635dd_TS.jpg)
Light intensity is sufficient for your needs.
I purchased this as a Rear blinker for my HPS300.
The light intensity was sufficient and no Relay replacement etc. was needed.
Use the included Sleeve to tie the wires together. It is not a difficult task, but there is no spare in case of failure, and I have not seen it in Home center, so if you need a spare sleeve, you may want to buy one from Amazon or other places.
It's a personal preference category, but I think Lens is the way to go. [Color] If there is a smoked lens model, I would like to replace it.
View detail
Gold ♪ from the photo ♪
I think it is difficult to replace the bolt on the OEM footpeg with a half-assed tool because the locking agent is effective when removing the bolt from the OEM footpeg. I think it is difficult to replace the footpeg. View detail
Blue text is hard to read.
[How is it used?
Touring Main.
Was the one you received as per Image?
The shape and size were exactly as shown in the Image.
Was the installation difficult?
When crimping Bullet Type Terminals, the wiring is so thin that it is necessary to strip more strands and bend them three times in order to crimp the terminal firmly.
How was your experience with it?
The opening ceremony is Parenthesis good!
[Included Parts:were they on?
Temperature Sensor, Surface Fastener, In-Hemp palm dock, etc., were all needed for installation.
[Was there anything that disappointed you?
The display surface is glossy and the Blue letters are hard to see because of the reflection; Red letters might be easier to see.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Koso mini 3
The product matches the description, the product is not available in Vietnam so you have to wait for shipping from webike Japan at a quite high price. I tested it and it works perfectly. View detail
![KOSO Round and Round Kick Pedal [CUB MONKEY Series]](https://img.webike-cdn.net/catalogue/14762/09072002_5049d44b3fab4_TS.jpg)
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA cub, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA cub
Pimp to LITTLE CUB (carburetor)
[How is it used?
Normal kick is dirty and needs to be replaced
Was the one you received as per Image?
Plating is thicker and looks better than the photo.
Was the installation difficult?
Just a normal exchange.
How was your experience with it?
I was worried about interference with the Exhaust System, but there is enough room for a Large
I'm using WirusWin's RODExhaust System, but NORMAL would work too.
[Included Parts:were they on?
Screw for fixing
[Was there anything that disappointed you?
I'm a little concerned about it hitting the Side coverretc. because it falls too far inward when it's tipped over.
I have no complaints about this level of quality for a few hundred yen more than the OEM compatible product.
View detail
Somehow.
I am not sure of the effect of the resistance yet, as I have only purchased the motorcycle and am only breaking it in. I replaced the screws because I only had to replace them for the time being. View detail
![Racing Weight Roller 20×12 [13.0G]](https://img.webike-cdn.net/catalogue/images/13921/ksw-2012-130_1_TS.jpg)
Fits: YAMAHA VINO125, YAMAHA VINO125, YAMAHA BWS125(BWS), YAMAHA BWS125(BWS)
Good cost performance, durability, and quality
The 6 pieces are under 1000 yen, but the pieces under 13g are finely lineuped in 0.5g increments, with little variation in weight, and the Edge is rounded and carefully finished.
Also, although the durability is not specifically claimed, it is good with almost no wear even after 10,000 km of driving, with only the Light tune level of the drive system and some Engine tinkering.
View detail
Broken and replaced
Sensor broke, so I had to replace it. It didn't last long because of a bad hit. View detail
Psycho ー
It was good. I would definitely recommend! View detail