Reviews
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125SF
Reliable quality.
When I replaced it with a uniFilter, the intake noise was too loud. This is cheap and very quiet, whether coarse or fine. I can hear the navigation sound even at full throttle. View detail
Fits: YAMAHA NMAX, YAMAHA NMAX 155, YAMAHA NMAX155
OEM to Koso
BirdCity125 (SEC-1J) mounted on
Exhaust System with good venting Beams Corsa Evo (originally for Nmax) After changing to Koso HURR, I found that there was a serious lack of torque due to insufficient mixture and the engine would often not start. However, I thought that I should change the air cleaner filter to something that can take in more intake air than the OEM if I had put in an exhaust system with such a good extraction and touched the fuel adjustment.
As described in the Instruction Manual, the finer filter is used from the beginning for the Quantity:The set was installed as it was first.
Unfortunately, there was little difference in the way the OEMs felt the difference.
This is because the drive system is already ….
Koso Lightweight Drive Face
Koso PowerPulley (8g×3+11g×3 Weight rollerSetting)
Koso Lightweight Clutch (Winner Spring also tried 1000rpm&1500rpm and decided that OEMSpring's Clutch in was better for basic city commuter Ride, so OEM)
Koso Clutch outer cover
Koso Reinforced Center Spring (1000rpm)
LongTorque Camshaft Pin
Reinforced Belt made by KN Planning (Because the Torque Camshaft Pin was changed, it was necessary to make a longer Belt.)
I wonder if it is not a Level where you can feel a large difference only by using Filter.
In addition, the fuel setting with this air filter has not yet been properly set.
Therefore, it is difficult to evaluate FilterSingle Body, but I would like to try a rougher filter, and if there is a difference that can be felt when the fuel setting is determined, I would like to add it again.
The only thing to look at is that it has become Accent with a single red line in the middle.
Installation takes less than 5 minutes.
Unless you also want to do internal cleaning while you are at it.
View detail
Fits: YAMAHA NMAX, YAMAHA NMAX 155, YAMAHA NMAX155
At 10,000 km maintenance
We were using endurance's High Power air filter which was replaced at the same time when the Exhaust System was replaced.
I wanted to do the same this time, but it was discontinued and I had no choice but to replace it with this one.
Low-density and high-density Filters are enclosed, but this time I installed both.
I then did a TEST run around the neighborhood … I didn't notice any change.
View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX125, YAMAHA NMAX155, YAMAHA AUGER, YAMAHA FORCE2.0, YAMAHA X FORCE, YAMAHA BW'S125, YAMAHA CYGNUS Gryphus, YAMAHA CYGNUS Gryphus
It is easy to install. Fee Ring is also …?
Installation is easy with Phillips Screwdriver, 1 pc for easy replacement.
Driving Fee Rings Say Ha Drill Full throttle, full throttle Rider. I was thinking of going to... (Lol)
Response from medium speed is quite good, and I have a problem that I want to open Axel;
Another thing I noticed is that the low-speed Torque has become a little thinner.
This area may still need to be set up with a fuel conditioner!
By the way, my NMAX is "SP Tadao" The rest of the engine and drivetrain are all NORMAL. (Lol)
Perhaps a Normal muffler would be a better match?
The intake sound is quite nice, so even if you are a normal muffler rider, you can still enjoy the sound of the intake air. A little more powerful Sound…" I'm sure Rider will be able to find a way to make it an Exactly Item!
Really nice in that it's easy to install and you can feel the difference from the NORMAL!
For myself, I am a low speed Torque and Start dash oriented person, so I will give it 4 stars.
View detail
It works on the Model 3 500!
It's for TMAX530, but I could fit it on my Type 3 500 with no problem! View detail
Fits: Others Universal
Stroke is a perfect fit.
Some of the other extended Chalks have insufficient Valve retraction space and blocked the air passage at ChalkON. This product, on the other hand, has enough Stroke, so I was able to adjust the Spring pressure to push the Gas hole at Chalk OFF and the full opening of the air passage at Chalk ON correctly.
View detail
Repair item
Just because I chose to do this doesn't mean that
It doesn't change anything.
I've heard rumors of a power-up.
It's all in my head!
Think of it as an OEMFilter for Repair and you're good to go
View detail
Fits: YAMAHA NMAX, YAMAHA NMAX 155, YAMAHA NMAX155
You will feel the effects.
I installed it on my NMAX125.
Installation takes less than 30 minutes as all you have to do is remove the OEM Air cleaner box and replace the Filter. You just need to decide on the coarseness of the filter's grit beforehand. I chose the coarse one in our case. (If you prefer a finer grit, you'll need to replace it beforehand because the coarser grit is installed from the beginning.) 。
At high rpm range, the punch power is up but the fuel consumption is 2km worse.
View detail
It can be used in rainy weather with no problem
What made you decide to buy?
A friend of mine had replaced it with a KOSO RACINGElement and I was so jealous that I bought it
The affordable price was also very attractive
How was your experience with it?
Exhaust System (OVER TT-Formula Full titanium) When I replaced them, I installed them together
The Instruction Manual shows 0.15PSPower for the air filter only There was a sign that it would be up, but I replaced it with the Exhaust System at the same time I honestly don't know how effective it is
I was worried about running in the rain because it's a dry Filter, but I had no problem running in the pouring rain It was
Since it is a type that is installed inside the OEM air cleaner box, the intake sound is unchanged It was not
Was the installation difficult?
It's very easy to remove the three Bolts
The Instruction Manual is also illustrated and helpful, and I think anyone can replace it
【Please tell me the installation point and hang】
This air filter has a specified mounting orientation, so make sure you get it right
The direction is described in both the Instruction Manual and FilterBody No worries
[Was there anything that disappointed you?
It can't be helped, but it's hidden inside the OEM's air cleaner box It doesn't have a custom feel
Do you have any wishes or improvements you would like to make for the Manufacturer?
Not particularly
[Do you have any products to compare it to?
SP Takekawa Power Filter
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
Red fade color is good
Idling degree does not know the difference in sound.
I think I will check with Touring next time.
Since Cover is attached, I think that Red Line enters and Fashion degree is up..
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
Looks good! Performance good!
The house CYGNUS, 125 at High compression piston - High CamshaftSpec. is.
Previously I used other Manufacturer's,
I breathed a little while accelerating my brain when I switched to High-compression,
I decided to buy this product because it has many options because it comes with a low density Filter and a high density Filter, with attaching a Filter cover, and not attaching it.
Currently there is no Cover, the breath is gone at all with low density Filter.
Home CYGNUS Spec. It was perfect for.
View detail
For BWS 125 SEA 6 J
I tried replacing Air Filter.
Personally I could not feel the effect. It may just be dull!
It may be good to attach BigSizeAir cleaner duct.
The work is easy, just remove the OEM Product by hand, just put this product in the direction.
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
As expected a product with many users
【What made you decide the purchase?】 Because it was RACINGFilter at this price.
【How was it actually used?】 The inspiration is up compared to the NORMAL Filter.
【Was it difficult to install? (Hard parts case)】 Just remove the NORMAL Filter and replace it. it's simple.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Anyone with Driver can do it.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
[Is there anything I was disappointed about?] None. The roughness of the eyes is different Quantity : 1 Set of 2pc. It is good deal.
【Hope for Manufacturer - Please tell me if there are any improvement points】 No particular.
【Have you compared items?】 nothing special.
[Others] Even if you add Cover you will see the Red color of the Filter itself so you will get a sense of Custom!
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
inhale.
Along with the replacement of CYGNUS's WJSnakeCone Exhaust System, we chose a wider surface area filter with an outside filter for inspiration Up.
Tighten your eyes, Torque up the whole area and make the high rotation extend. Turn it and have fun ~
View detail
Used for V125
Changed from OEM to Powerful along with Long wheel base.
Although I use it on commuting and rainy days, it can be used without problem because it is all weather type.
Cost performance is also excellent, so it's a recommended dish.
View detail