Reviews
It's easy to see, isn't it?
I've been using the RX2NMeter for a long time.
I purchased this for the Meter change.
The Coupler is still the same as it was in the past, so I thought if it's a Waterproof ConnectorType, I'll be able to get it ….
Wiring is as thin as ever, though!
View detail
It's the bare minimum, and the cost is good.
The water temperature gauge on the STREET TRIPLE is Bar type. This water temperature sensor is not equipped with any functions other than water temperature. The water temperature sensor is included in the package, so you can easily install it with the hose joint.
The meter display is red, but I think it's a little hard to see during the day.
The function of the water temperature gauge is a bit worrying when it's so cheap, but so far it doesn't seem to be a problem.
View detail
![KOSO Super Slim Style Meter [Voltmeter / Red Display]](https://global.webike-cdn.net/photo/impression/ad/ad348877d03333784e00f0ce4d58a228L.jpg)
It looks good, but …
I bought it because the voltage of my Motorcycle was unstable
Looks and visibility is good, but the Cable is too thin
Crimping is not a good idea if you don't have a solid solder on it It can be
By the way, the enclosed Adapter for interrupts was not useful
View detail
Compact and good product
Installed on GSX-R1000R L7. sensor is koso's M16Sensor I used an adapter to install it in the deeper Oil galleryBolt hole Oil galleryBolt holes in the shallow end have Oil Temperature I installed the MeterSensor Both bolt holes are M16
View detail
![KOSO Super Slim Style Meter [Voltage / Watch] Blue Display](https://img.webike-cdn.net/catalogue/14762/07192156_51e9376e7c973_TS.jpg)
Easy to use
I bought this one because the Meter clock is hard to read It is bright and easy to read The voltmeter is good to know the voltage that Cell is not working I asked a motorcycle shop to install it View detail
Compact and unobtrusive
I installed it on my Bore up APE 50 I bought it to understand the condition of the oil temperature rise in summer I chose this one because I didn't want to wear a large meter
MeterSensor Adapter for the KOSOMeter if you want to install the APE 50 M12 P1.5 L15 was needed separately, so I bought this one too
It's been about a month since it was installed and so far it's been working without any problems
View detail
It can be attached to the famous Temp meter
Honestly, it's been a long time coming It could work I was expecting this to be a good idea, but...sure enough, bingo
This Sensor, Yoshimura's PRO-GRESS Available for
The GSX-S/R is included in the official version of YOSHIMURA's PRO-GRESS Sensor It is a 125 DrainBolt size M10×1.25 There is no setting for the Not for sale but this guy will allow you to use it
temperature and voltage Two only Since there should be no meter (as far as I know) that can use YOSHIMURA's PRO-GRESS It would be very nice to have the
(Note:There are several meters that display temperature, voltage, and clock, but the GSX-S125 is not From the beginning "The Clock With the function of a retrofit meter "The Clock (is, in a sense, a useless feature.)
As a matter of fact, I have tried to divert the sensor from the old Bolt/Temp meter at Yoshimura before After analyzing the cause of the failure, I investigated it and found out that I can use it as a result I'm glad I understood
The border between the Connector and the Harness part is also processed by Heat Shrink Tube Yes, no problem
As for the complaints The "two-sided width of the hexagon" in relation to the bolt size diameter It's a "is a Small Sized" thing
If the selection of the gasket used is incorrect, the seal surface may not be secured and oil leakage may occur
Therefore, from the beginning, for the purpose of diversion, only Self-judgment In
View detail
Radiator for bore up kit
Koso did it again,big radiator fins for excellent cooling system.im having problem before with over heating after installing 63mm bore kit.this radiator solve my overheating.very nice item.more product from koso and KN PLANNING... View detail
![Pro1 Multi Meter [Tachometer / Thermometer]](https://img.webike-cdn.net/catalogue/images/40464/07312222_597f2f28a075c_TS.jpg)
KOSO multimeter
I buy in this store all the time and I am very pleased with the product and the packaging has changed for the better. Previously, the packaging was in an ordinary box and stuffed with a Japanese newspaper, but now it is a branded box and a bubble wrap. This device was checked and it is fully operational, the backlight is very pleasant. The setup instructions did not help because it was in Japanese, but the detailed pictures helped and thanks to them I set it up. The device works both from a battery which is included in the kit and from the power supply which I took from the ignition switch. The battery-powered multimeter works for a few seconds and turns off and every time you have to turn it on, I did not like it and I made power through the ignition switch, namely the plus wire to the contact when the ignition switch is on. When I turn the ignition key, the device turns on. The set included: the device itself, an extension cord with plugs, clamps for fixing the wire and a sensor for measuring the temperature of the coolant. The multimeter can be configured to limit speed and temperature. When you set the maximum value and upon reaching them, the device starts blinking and warns you. Delivery to Russia was standard. Tracked all the way and reached the Moscow region in 8 days by ems mail, the parcel was delivered by a courier. I buy in this store constantly and very pleased with the product and packaging has changed for the better. Previously, the packaging was in an ordinary box and stuffed with a Japanese newspaper, but now it has a branded box and a pimple. This device was checked and it is completely working, the backlight is very pleasant. The setup instructions did not help because it is in Japanese, but detailed pictures helped and thanks to them I set it up. The device works both from the battery that comes with the battery and from the power that I took from the ignition switch. The battery multimeter works for several seconds and turns off and each time you have to turn it on, I did not like it and I created power through the ignition, namely the plus wire to the contact when the ignition is turned on. When I turn the ignition key, the device turns on. The kit included: the device itself, an extension cord with plugs, clips for fixing the wire and a sensor for measuring the temperature of the coolant. The multimeter can be adjusted to limit speed and temperature. When you set the maximum value and upon reaching them, the device starts blinking and warns you. Delivery to Russia was standard. It is tracked all the way and reached the Moscow region in 8 days by e-mail, the parcel delivered the parcel. translated by google translate View detail
Fits: YAMAHA FORCE155, YAMAHA SMAX, YAMAHA MAJESTYS
Material:Carbon Style is cool!
Engine tuned, too
I installed it to increase the cooling
It looks cool and holds more cooling water than the OEM
Size is not so different from NORMAL
View detail
![KOSO Mini3 digital air-fuel ratio meter [HONDA]](https://global.webike-cdn.net/photo/impression/1f/1f20ec41c71c394b4665a56173d48a80L.jpg)
Fits: HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA PCX150, HONDA MONKEY
Mounted on Bore upGROM
Takekawa：SStageBore Up Kit181?・Sports Camshaft・Big Replaced with Throttle Body Kit, Injector is KITACO:Large Capacity Injector OEM 1.6x and fuel control by Takekawa:FIcon 2. Mini3 The Meter is a simple air-fuel ratio meter that displays the air-fuel ratio fed back from the OEM O2Sensor This is a simple AFR meter that displays the AFR and installed
Before installing the Mini3Meter, the Mini3Meter was set up on a large scale with FIcon 2 But when I installed the Mini3Meter and did a test run... the fuel was surprisingly thin (Sweat) I found out the reason why the OEM gas mileage was good and the reason why the plug was white Furthermore, since Sensor is OEM, this is only a rough guide, but when FIcon2 is adjusted, the change in numbers is not as great as it should be It was there The price is low and I recommend it for customised GROMs
Mini3Meter installation is easy. By Manufacturer SensorHarness was interrupted by the OEMO2Sensor coupler to create a Mini If you connect the power supply of the 3Meter to the Earth, it's all done Also, Mini3Meter is a miniature version of the Mini3Meter, as the name implies Compact I'm using Meter Bracket as Active:Digital MonitorCompactBracket for good visibility! and installed in a location for future Up dates
View detail
Size of the Exactly to ZZr1100 OEMMeter is
Disassemble the OEMMeter of ZZr1100 and remove the water temperature gauge Since this meter is almost the same size as the window cover of the water temperature gauge, I used a hot bond to remove it from inside Wiring can also use the terminal block on the back of the meter, so it's easy to make the water temperature gauge It can be digitized The display is bright and easy to read at any time of the day or night View detail
Actively on CB400BOLDOR CowlPanel
CB400SUPER BOLDOR meter next to the panel next to the meter with Large Exactly I was looking for something of the same size
It fits in nicely without any discomfort
The text is Clearly and legibility is good
The price is affordable and easy to buy
The wiring is also made well, so you can rest assured that it is safe
I bought a KOSO Square Type voltmeter a few years ago, and it's still in use, so I'm still using it
I trust it in terms of Manufacturer
Buy another one, Quantity:Pair (for Left and Right) I'd like to put it on
View detail
cheap
I was looking for an inexpensive water temperature gauge as I felt the need for one when driving in the summer, and this is what I was looking for and I didn't hesitate to buy it The installation was not particularly difficult, and it was completed safely, but there is a protection at the base of the thin line that leads to the body The display is generally accurate as the fan starts to turn at around 100 degrees The display is generally accurate, as the fan starts to turn at around 100 degrees View detail
![KOSO Temperature Sensor Adapter [12M X P1.5 X L15]](https://global.webike-cdn.net/photo/impression/0c/0cff1ad4c9ca0e9cd8c9444e39168f48L.jpg)
Fits: HONDA MSX125, HONDA glom, YAMAHA BWS125(BWS), YAMAHA BWS125(BWS), HONDA MONKEY, HONDA MAGNA50, HONDA MAGNA50, HONDA MAGNA50, HONDA MAGNA50, HONDA GORILLA, HONDA APE 50, HONDA APE 100
Material:It's aluminum, so be careful
It was Large sturdy because there is also the imprecation of other people's cracked, and I tightened it while being scared Because the exclusive use of DAYTONA was expensive I wanted to know the oil temperature for now in Hamada, and it helped me. m12×1.5 Then you can do whatever you want
View detail
![KOSO Mini3 digital air-fuel ratio meter [HONDA]](https://img.webike-cdn.net/catalogue/14762/04292349_517e886e89179_TS.jpg)
Fits: HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA PCX150, HONDA MONKEY
Whether it's early failure or Garbage
After installation, check the start
When the power is on, it says 13.5, but why does it show the A/F ratio when the engine is not running? I wondered if it was a good idea, but I started the Engine anyway I opened it up and blew it out...whether there was an increase or decrease of 0.1
I tried Idling for a while, but it was about 13.5 all the way
Changed to extreme fuel gush in Enigma. no RICH or LEAN display. all the way to 13.5 13.5 all the way, sometimes it shows RICH and doesn't come back
It's broken
I wanted to know what the measurement error was with the other air/fuel ratio meter I've been using for some time
I threw eight thousand dollars down the drain
When I switched back to my old A/F ratio gauge, there was nothing wrong, so I was still grabbed by Garbage I guess that's about it
View detail
Fits: HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA PCX150, HONDA MONKEY
'16 GROM (JC61) Mounting on
It is not written on the car models, but Couplet-on is also included in 16GROM I did
(The power supply is the only thing that needs to be modified in any car model, though.)
I don't know the accuracy, but it depends on the accuracy of the OEMSensor to begin with, so it's comforting to say that it's a relief
I'm hoping I don't swing off in a lean direction
View detail
![KOSO Mini3 digital air-fuel ratio meter [HONDA]](https://global.webike-cdn.net/photo/impression/cc/cccaf8c48d81d8cdabb88f9b5056c39dL.jpg)
Fits: HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA PCX150, HONDA MONKEY
I installed it in SUPER CUB110 JA10
I bought it to see how it would feel It was easy to install with the instruction manual I am not sure of the accuracy, but I think it's a good guide View detail
![KOSO Super Slim Style Meter [Voltmeter / Red Display]](https://global.webike-cdn.net/photo/impression/c4/c4b0a98c59bced0a998f5a3a63f3aa85L.jpg)
Compact and easy to read
I bought a voltmeter with a blue LED display instead of a red one
The water thermometer had a red LED display, so I didn't want to confuse it with a red one
The best thing about it is that it's compact, has good visibility, and doesn't require a lot of space to install
View detail
Compact and easy to read
Red LED with good visibility and compact size, so there is not much room for installation It is easy to use on a motorcycle
This is a simple digital meter with no extra features, and it is the most popular It is cheaper than the manufacturer's and has superior cost performance I think
View detail