Reviews
Visibility Up
The flowing blinker and position lights are always on. The sunset time is early in the season, so we put it on for visibility even on a small motorbike.
Bracket is a POSH Faith item number ： 098101-26 and had no problems.
View detail
It's cool
I was worried about other Blinkers.
Some combinations of Tail and Relay
There were some Cases that were sequential but not sequential.
I bought it with KOSOTail in Rear.
View detail
Flashing is bright!
I purchased this along with the KOSOBlinker from Front.
When you release the Brake, it doesn't disappear in a flash, it disappears slowly!
View detail
![Sequential LED Blinker 3 [Vehicle Inspection Compliant] Light Smoke [GW-02] Left/Right Set](https://img.webike-cdn.net/catalogue/images/105463/09042127_5f52329de0c07_TS.jpg)
Fits: Others for DC12V
Good Product!
The quality of the product is good, it is genuine, and the packaging is safe and rigorous! After paying for the order, the goods will be received within a week and sent to the office, which is very fast and convenient! View detail
feeling that something is too bright
The glowing Samples that can be found at most motorcycle supply stores. It is so bright that it is dazzling at night.
In the two and a half years since it was installed, it has never flooded or broken, even though it has been run in the rain.
Some Wiring processing may be required.
View detail
Feels a little too bright.
The glowing Samples that can be found at most motorcycle supply stores. It is so bright that it is dazzling at night.
In the two and a half years since it was installed, it has never flooded or broken, even though it has been run in the rain.
Some Wiring processing may be required.
View detail
safety first
The blinker, tail lamp and stop lamp are all in one.
I did a lighting test and it was pretty bright.
Lighting test = check as there is no instruction manual
Black=Earth
Red = Stop
Green Light = Blinker
White=Tail lamp
It was
Reason for replacement = Since I have a top case installed, I thought visibility would be poor in the NORMAL state and decided to replace it.
Simultaneously for Front (with position lamp) I've also bought a new one to make it even safer. (=^・^=)
Wiring is a hassle, but safety comes first.
I'm not sure if this is a good idea or not, but it's a good idea.
View detail
High quality and great cost performance
This is the best design and size for the OEM parts.
The brightness of the Blinker is also much brighter than the NORMAL, and because it is sequential, it is also parenthesis proof when operating. As for the installation, the connector of Blinker is not found, and the Wiring of NORMAL is processed and converted at the back of Cover. Because the power supply Connector had already used the power supply Connector with the extraction of the power supply for the smart phone, the one which was bundled is not used.
The installation took about an hour but it took me a while to find the Connector but if I had machined the existing Wiring from the start it would have taken about 20 minutes.
View detail
LED Blinker with Design◎.
I liked the look of the Parenthesis goodness.
There is no picture that can understand the largeness of the Body, and I was troubled about the purchase considerably.
I took the plunge because of the Parenthesis goodness, and I am very happy with the results.
It also matches the Design of the YZF-R25.
It even seems like a YZF-R25Exclusive Design.
You will need to purchase HolderPlate separately, but
Because Bullet Type Terminal is clamped, it can be installed on YZF-R25.
Plus and Minus should be checked by actually lighting them.
The Blinker relay needs to be replaced as it is an LED.
The blinker relay was replaced with the LED blinker of DAYTONA, and it worked normally.
If you do not want to use the Hazard function, simply replace it with the OEM Product.
It's bright enough.
I have been using it for about 6 months and no Trouble.
It's a good product
View detail
Even if it's small, it's a Japanese Vehicle Inspection Correspondence, and the visibility to be covered is good.
Is this the latest trend in Car? However, as far as I know, Motorcycle has not yet adopted the sequential blinker as an OEM, and I only see it here and there in Aftermarket parts.
Among them, this product is very compact compared to the other products, and I think it is an Exactly product when you want to make it refreshed.
Are you worried about the amount of light from the Small Dice? I thought it was a good idea, but I think it's properly EMarked, so I don't think it's a problem to inspect the car.
Also, it is bright enough, and even in the hot sun during the daytime, it is brighter than the OEM bulb, so there seems to be little worry about being overlooked by the following cars.
Unusually, 1 pc is also sold as a quantity:Buying 2pc would be a decent price, but I think it's reasonable to buy from 1pc to replace it in the event of a tumble, etc.
I installed it on the Rr side, and I love it because it matches the Gold genus of the Fender Eliminator Kit.
View detail
Just the right size
I replaced it with Blinker Reply's Fender, so
I had a hard time deciding which Blinker to use, so I went with Sequential Time, which has been very popular lately
It is a good size, not too big
I had to use Relay properly or it wouldn't flow ahead
View detail
Cool
I had a DRC LED Blinker on my KLX250, but after about four years Due to the deterioration of the rubber part of the blinker, the blinker was turned down to the Sauce eye I went with this blinker, which I liked the design of When I originally put on the DRC blinker, I had Relay on it, so it probably won't be a problem When I thought about it, I bought only BlinkerBody, and it is a Blinker that flows without any problem at all It is even more compact, simple and cooler than the previous one It is more Compact, Simple and Cool than the previous one After that, as for the durability, it is the verification while riding from now on Because the installation is an ordinary Bullet Type Terminal, the installation of Blinker which is removed If you follow the wiring, you should be able to install it without any problems In my case, at the time of DRCBlinker installation, Front is a special Spacer and Rear is a special Spacer I had it on from the Fender Eliminator Tail Lamp Kit, so it was perfect From NORMAL, I don't know if you have a Spacer when you install this Blinker Please check for yourself View detail
Small but cheerful! Good quality though cheap!
I bought it as Font Blinker of GROM.
Small but it's very bright and design is also good.
High quality and affordable for price.
Because it is diversion it does not use the attached Bracket.
Those who are looking for a blinding blinker that is inconspicuous are definitely coming!
View detail
Diversion to D-TRACKER
Although it was said that it was a car model exclusive item, Cool in a shape not elsewhere!
So I tried to divert it to D tiger.
At first I was trying to stick it to the Stem Stabilizer and turn it to portrait, but because it was not good, I extended Bracket and landed sideways.
Compact is sufficiently bright above it.
Since it is originally a special item, Instruction Manualetc. I think that it is kind and kind (I am reading it because it is diverted... )
Design is one of the few items that combines brightness and brightness. I also expect durability.
View detail
Mounting on GROM
Small but metaxis bright !!!!
I chose it with no other shape
It's perfect for diversion b
I am removing Case and using it
Recommendation is for those who failed in brightness.
View detail