Reviews
Highly effective in preventing mud splashes
There was an 85mm gap between the OEM Mud Guard and the inner fender, and there was a lot of mud splashing from that area.
The License Plate and Top case get dirty when driving in the rain, and I was looking for something better and found this product.
This is a dedicated product, so it can be installed without any modification.
If you are not concerned about the torque, you can install it with only a 4mm and 5mm Hexagonal Wrench, and the work time is about 10 minutes.
In the photo, the hexagonal hole has a plug, but the plug is not included.
Surface is Carbon Style PP (Polypropylene) Made of.
The OEM Mud Guard has a reflector, but this one does not, so you will need a separate license frame with reflector or a reflector that can be tightened together with the license plate.
View detail
Somehow.
I am not sure of the effect of the resistance yet, as I have only purchased the motorcycle and am only breaking it in. I replaced the screws because I only had to replace them for the time being. View detail
AeroGrill installed.
Installation is easy and requires only 3 screws.
I think it looks Carbon Style and cool.
KOSO's products are also inexpensive, which is a nice gem.
View detail
Rear Fender installed.
I bought it as a Custom.
It looks good and cool.
Easy to install
Mud roll up is also better than expected.
The Instruction Manual is also clearly written.
View detail
Parenthesis OK
I don't know if it really works, but I put it on because Parenthesis is good.
Note that the mounting surface is curved.
View detail
appearance
It looks better Parenthesis and is easy to install. I am not sure how well it works yet. View detail
Fits: YAMAHA SMAX, YAMAHA SMAX, YAMAHA MAJESTYS, YAMAHA FORCE155, YAMAHA MAJESTYS
It looks cool and I am satisfied with it.
This is a Cover that simply fits over the Radiator.
Mounting is Material attached to the surface:It is easy to remove the PlasticCover and fit it into the Radiator.
In addition, I put the KN Planning Radiator guardPanel inside, but I have no idea.
View detail
Fits: YAMAHA CYGNUSGRYPHUS, YAMAHA CYGNUSGRYPHUS
self-satisfaction
Parts that are self-satisfying only in appearance.
Personally, I prefer a little more Large Vertically long." would you like to ...?
Largeness is roughly the same as OEM.
View detail
GP Style Aero Dynamic Wing Kit
A little modification of wings (;´д) KOSO View detail
Low mountStop lamp.
Replaced with CYGNUS Glyphus OEMReflector.
It was difficult to examine and extract the Earth, Small, and Brake signals from the vehicle.
Note that the removed OEMReflector was replaced by a License PlateFrame with Reflector.
View detail
This is a replacement for the Fender Eliminator Number made by DAYTONA.
I thought LEDs would never break, but the one from DAYTONA's Fender Eliminator broke in less than a year. DAYTONA's for Repair is expensive and the life span is too short, so I decided to try the KOSO one.
The screw pitch was slightly different, but the koso one has a thinner bolt, so I was able to install it. I was not expecting the warm color of the LED, but it is well made and looks promising. The nut is very small and 5.5mm, so it is better to check the tool for installation.
However, it would be helpful if this kind of thing was a little cheaper.
View detail
Fits: YAMAHA SMAX, YAMAHA CYGNUS X, YAMAHA FORCE155, YAMAHA CYGNUS X
Mounted on CYGNUS X5 model
I bought it because I was looking for a Taiwanese use and it was applicable. View detail
Do you like feathers?
I like it.
I think this is a really controversial part.
I'm not going up in function at all.
I feel a lot better!
The change in appearance...
It'll lift the rider's spirits!
View detail
I don't ride in the rain.
I want to tell myself that it is Large strange on a rainy day.
But I'm also very happy with the Stylish look of the Back lol.
View detail
Durability unknown.
The Large type box of the Rear is a disaster, and Handlebar runout occurs at the time of the headwind and acceleration, and it becomes a situation to think about countermeasures.
Impressions of our predecessors made it somewhat better and introduced it.
Big li to open the product.
Do not use it while driving.
Large Is it strong? But deal with it at your own risk.
The result is that the Front's ground feel is somewhat restored; it's best to remove the Rear's Large-type Box or something, but I'm prioritizing convenience, so I guess this is a compromise?
It's a big deal that a toy-like feather has so much meaning.
However, I moved the blinker and fixed it to the blinker bracket because it is a premise for mounting on the cowl.
If it was a straight upholstered surface, I wanted to mount it on a Front Fender or something.
As a Type 2, I'll buy Repeat when they come out with a flat glued product.
View detail
Good
Because Cooling fan has been lightened, under Seat at this time of the year, it becomes hot immediately It is Because it is troublesome to return Cooling fan to NORMAL by the season, I decided to purchase it It is not a long distance, but Seat which had become hot on the way to work is not a concern so much after installation It's gone View detail
Fake YAMAHA Super JOGZr Wing Blackett
I found it while wandering around We-Big
The body of the motorcycle is a bit thin, so I wanted to accent it and to make it more interesting Buy it because it looks white
Like YAMAHA Super JOGZr Wing Blackett under the Light cowl I wanted to put it on, but I couldn't get the rims to fit, so I stuck it in the current position
The attached double-sided tape is made of 3M and is quite strong, so it's a one-shot deal It probably won't come off again after you put it on Last time, it seems to have been scratched on the road surface when driving on the course, but it didn't move even a little bit ;no longer Cowl Slider?
Color:Unpainted's The Material finish, so honestly, it's a great way to get a high-end motorcycle is not recommended, but if you're a motorcycle with a lot of plastic parts, you won't mind
View detail
Cool！
Bw039;s ride
That's the first Parts you want to keep in check!
And it looks good
Parts that make sense from a functional standpoint
It's a bit stuffy underfoot when you stop in the summer, though..
View detail
It's easy to get a race ish vibe
I replaced the OEM bandit-like Inner fender with a wild one
The exchange was very easy
Remove the Helmet In Box, shift the air cleaner case, and replace the rear brake If you remove the hoseBand, you can remove the inner fender
It's a long story if you write it down in words, but in reality, it only takes you 30 minutes to remove 8 Bolts, so you can replace them in 30 minutes
The product information said there may be some distortions, but what I received was Exactly what I needed! It was
Compared to the OEMs, the appearance is considerably refreshed and the Tire exposure is increased and Race The atmosphere will be ish
However, the disadvantage is that it is shorter in length, which increases water repellency on rainy days
View detail
It looks 100 points!
I predicted it before purchasing, but if it is a wet road with Rear fender-less I will wind up the water to my back.
It is perfect if it is a model with a spartan atmosphere with Length that is a bit closer to NORMAL... Balance of Visual and convenience is difficult.
If it is just look it is 100 points.
View detail