Reviews
Grom JC61 '15
Used for Grom JC61
I bought this for the guard of my Yamamoto racing muffler in case of falls.
The Bolt that comes with this kit or the Bolt on the Yamamoto racing muffler is not long enough, so you can use a Bolt that is 10mm longer.
If you want to add color, you need to make it longer for the color.
View detail
I don't know the effect yet.
Fortunately I haven't had any mishaps since I installed it, so I don't know if it works or not. if you can install it under the exhaust system, you can guard it perfectly. I don't think it's durable, so you may have to replace it every time you have a mishap. View detail
Good
I installed it on CYGNUSX (1YP2). I crashed a little while ago and installed SP Tadao's Exhaust System pretty well.
I scratched it, and installed it just in case I had to replace the Exhaust System.
There are many screws and two colors. I don't like them sticking out too much, so I chose No Color.
I installed the exhaust pipe and Slider, there is not much room for clearance with the ground and Slider
I think I'm going to add some color to it.
I think the design is good without looking bad, but it would be even better if the price was a little lower.
View detail
I'm a little disappointed that I haven't scratched that itch.
[How is it used?
Currently in use after installation.
Was the one you received as per Image?
I was surprised to see that there were more bolts and colors included than the Image, and that the instructions were well written.
Was the installation difficult?
It's easy to install, but as you say, the Bolt length is too short to be effective as a Slider.
The Bolt is available in two sizes, 40mm and 60mm for both M8 and M10. I thought it was kind, but the length was not enough to fix the top of the exhaust system via Bracket, so I had to extend it.
I measured and installed 95mm Bolt and φ22×14mm Aluminum Collar after purchasing them separately.
How was your experience with it?
The existence itself is wild, but in the unlikely event that you think about the cost of replacing Silencer, on the contrary, it's starting to look cute! (Lol)
The effect of Slider is unknown because it has not been verified yet.
[Included Parts:were they on?
For M8Bolt, collar and conversion collar included.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
I hope Manufacturer will release Long boltType or SliderSingle Item only with lower price separately from this product.
View detail
It's universal, so the effect seems to be mixed.
I'm using it on my GSX250R.
It was installed in the place where the Exhaust Band is fixed.
You will need to purchase a longer Bolt because the included Bolt is too short to install in the first place.
The effect is so-so and solid that it seems to protect you, but I'm a little worried about it. . You shouldn't trust in Overlarge.
View detail
just to be sure
I installed Exhaust Guard
I changed the Exhaust System and used Blue before, but this time I chose Black I did
I installed it as a dress-up, just in case I fell down
View detail
It's up to you how to use it!
I mangled the mini circuit and scratched the exhaust system Installed for later
Because it's a Universal Product, the Bracket Department is a mishmash of unused parts I was forced to wear it I don't know if I'll be protected when it actually mocks, but I have to try mocking I don't want to mock
KOSO has this Not really It's good to have Parts
View detail
Parenthesis OK
I installed it in XG250 TRICKER Now I have Beams Down Type Exhaust System It was easy to install only with the Exhaust Band, but the bolt is attached to the system I used the Bolt of Beams Exhaust System, but the length is Limit It was It would have been perfect if it came with a long Bolt for that purpose I managed to get it on; Others is a product I can't say enough about View detail
It's easy to install and cool
I installed this on a 2000 GSX1300R HAYABUSA Installation itself is very easy, just tighten the collars and bolts that come with it
Unfortunately, it's a little short in length
I installed it under the Exhaust System, but I think it is a little short
A little disappointing in some respects, but very good for the price
View detail
As insurance
Because the position of the Silencer of the Exhaust System which I was wearing so far was inside the Side cover, I did not feel the necessity in particular, but this time Silencer is projecting outward from the Side cover and Titanium, I installed this product as insurance as myself who often coca.
The installation itself is very simple as it is just fastened to the Band to fix the Silencer.
Spacer was included, but it was exactly without using it.
View detail
I think that it is a guardian of Silencer.
Before ordering, the price was cheap so I did not expect much. The real thing is built quite reliably, and it corresponds to M 8 ? M 10 Bolt. M8 Bolt's Adapter is certain and can be fixed without rattling. Since the moss is not yet mossed, the actual strength is unknown, but it seems to protect Silencer of Liter machine without problems if slow moss. Because it is a Type that can separate the ground part and Body, we would like you to sell replacement Parts of the ground part. There are only items that KN plan deals with, and Cost performance is the best. View detail
Satisfied
I installed it in ninja 1000. Aluminum and Slider's resin texture is also satisfying Quality. The price is also cheap, COSPA is also good. Since the attached M10 × 60 Screw is short, I bought 70 mm Screw. I am satisfied with the overall review.
View detail
BW'S125 (SEA6J) To
I tried impulse purchase.
I got lost at the mounting position and fixed several times to fix the position.
Since the length of Bolt was short, I went to buy at Home center and installed it.
Exactly good with M8 80mm.
View detail
We will protect Silencer by standing gobble!
In my Motorcycle history I felt that the stall of the stall was 1, the slope road parking Neutral, the STAND off going out one time, the other car fallen overwhelmingly once, a fall in the corner ring, a collision with Truck... Opponent getaway... Conviction at trial!) Once. Well there were many.
Each time Motorcycle gets scratched.
The Engine side has a Babyface Slider, but if it is only that surely Silencer will pass away...
I bought this product by that.
SilencerQuantity : Quantity if there are 2pc : 2 Set necessary.
Attached is M8 × 40 M8 × 60 M10 × 40 M10 × 60 Bolt and Color.
Ninja 1000 is just right for M10 × 60.
Color seems to be Silver, Black, Gold, Orange, Blue, Red.
This time Silver. It fits well with the car body.
I do not want to take care of me, but I feel secure.
Although it can divide the pedestal and the resin part, can not purchase only the resin part or stated, so it is not reusable?
Would it be okay if it was an integrated type?
Not good for resin molding. BALI BALIBALI. MORIWAKI's Skid Pad was awesome. MotorcycleParts looks great in Large things. Aluminum grinding is nice though it is nice feeling.
View detail
It is cheap insurance!
I purchased it with the minutes of ZEPHYR and it is attached to '95 Zr. Like the other Impression, it is really cheap as insurance when falling down of Exhaust Chamber and Exhaust System, Cost performance is the best !!
When I was ZEPHYR, I did not think of anything, but when my Zr was at the mounting position, the Spacer was also part of Exhaust ChamberBracket, so when using the attached SpacerBolt Bolt is short or long - - - I replaced it with my own Aluminum spacer.
Since the attached Spacer has the same Size, if one Spacer is half Length × 2, Universality further increases and should be the best product for the purchaser side!
View detail
Silencer protection !!
I am using it for ZEPHYR 400. It's my own Rear Sets, but the Tandem Footpeg position is the same as the STD. One Sidefootpeg removed and installed. I wanted it from the front, but if I searched for a little ride JOGZr's Exhaust Chamber protection - - - Design is also good but this price was found, this product !!
I bought two cars right away (Lol)
Although it feels like it will break with Slider if it falls, Silencer will easily collapse with simple things, so Cost performance is high if you think it is insurance at this price.
View detail
Fallen cannibals
I bought it after consenting with the Universal Product's Exhaust System Slider, but it was installed perfectly.
Because it is bundled with a large number of Color and Bolt installed on inexpensive, it is a good product that can correspond to various car models.
Of course, it is best to not topple, but I think whether Silencer will be protected in case of emergency.
For reference, in ninja 1000, I used the longest 60 mm Bolt included, but I think that it is better to have been about 10 mm more, so I plan to exchange only Bolt at a later date.
Because it is a Universal Product, I will not recommend it to everyone, but I think that it is a good product.
View detail
CYGNUS X3 Taiwan Spec. The mounting
Buy with Exhaust System replacement.
There are also various types of attached Bolt, Instruction Manual is kindness itself.
Installation can be done in 5 minutes.
Because Color is abundant, it is good to enjoy various things!
View detail
As expected
I bought it for Deer bell's Exhaust System protection
It was a bit uneasy because it is a Universal Product
"Just fit"
The attached Bolt can be used for installation and is completed in about 10 minutes
Performance is unknown, but its price is better than price
I think that it is a good shopping
View detail
It is insurance..
I exchanged the Exhaust System with momentum and momentum, so I installed it on insurance at the same time. Length is also just fine, shorter than Tandem Footpeg and longer than Silencer. It is recommended ^ _ ^ View detail