Reviews
just to be sure
I installed Exhaust Guard
I changed the Exhaust System and used Blue before, but this time I chose Black I did
I installed it as a dress-up, just in case I fell down
View detail
It's up to you how to use it!
I mangled the mini circuit and scratched the exhaust system Installed for later
Because it's a Universal Product, the Bracket Department is a mishmash of unused parts I was forced to wear it I don't know if I'll be protected when it actually mocks, but I have to try mocking I don't want to mock
KOSO has this Not really It's good to have Parts
View detail
Parenthesis OK
I installed it in XG250 TRICKER Now I have Beams Down Type Exhaust System It was easy to install only with the Exhaust Band, but the bolt is attached to the system I used the Bolt of Beams Exhaust System, but the length is Limit It was It would have been perfect if it came with a long Bolt for that purpose I managed to get it on; Others is a product I can't say enough about View detail
I think that it is a guardian of Silencer.
Before ordering, the price was cheap so I did not expect much. The real thing is built quite reliably, and it corresponds to M 8 ? M 10 Bolt. M8 Bolt's Adapter is certain and can be fixed without rattling. Since the moss is not yet mossed, the actual strength is unknown, but it seems to protect Silencer of Liter machine without problems if slow moss. Because it is a Type that can separate the ground part and Body, we would like you to sell replacement Parts of the ground part. There are only items that KN plan deals with, and Cost performance is the best. View detail
It is cheap insurance!
I purchased it with the minutes of ZEPHYR and it is attached to '95 Zr. Like the other Impression, it is really cheap as insurance when falling down of Exhaust Chamber and Exhaust System, Cost performance is the best !!
When I was ZEPHYR, I did not think of anything, but when my Zr was at the mounting position, the Spacer was also part of Exhaust ChamberBracket, so when using the attached SpacerBolt Bolt is short or long - - - I replaced it with my own Aluminum spacer.
Since the attached Spacer has the same Size, if one Spacer is half Length × 2, Universality further increases and should be the best product for the purchaser side!
View detail
Silencer protection !!
I am using it for ZEPHYR 400. It's my own Rear Sets, but the Tandem Footpeg position is the same as the STD. One Sidefootpeg removed and installed. I wanted it from the front, but if I searched for a little ride JOGZr's Exhaust Chamber protection - - - Design is also good but this price was found, this product !!
I bought two cars right away (Lol)
Although it feels like it will break with Slider if it falls, Silencer will easily collapse with simple things, so Cost performance is high if you think it is insurance at this price.
View detail
Fallen cannibals
I bought it after consenting with the Universal Product's Exhaust System Slider, but it was installed perfectly.
Because it is bundled with a large number of Color and Bolt installed on inexpensive, it is a good product that can correspond to various car models.
Of course, it is best to not topple, but I think whether Silencer will be protected in case of emergency.
For reference, in ninja 1000, I used the longest 60 mm Bolt included, but I think that it is better to have been about 10 mm more, so I plan to exchange only Bolt at a later date.
Because it is a Universal Product, I will not recommend it to everyone, but I think that it is a good product.
View detail
CYGNUS X3 Taiwan Spec. The mounting
Buy with Exhaust System replacement.
There are also various types of attached Bolt, Instruction Manual is kindness itself.
Installation can be done in 5 minutes.
Because Color is abundant, it is good to enjoy various things!
View detail
As expected
I bought it for Deer bell's Exhaust System protection
It was a bit uneasy because it is a Universal Product
"Just fit"
The attached Bolt can be used for installation and is completed in about 10 minutes
Performance is unknown, but its price is better than price
I think that it is a good shopping
View detail
It is insurance..
I exchanged the Exhaust System with momentum and momentum, so I installed it on insurance at the same time. Length is also just fine, shorter than Tandem Footpeg and longer than Silencer. It is recommended ^ _ ^ View detail
Ninja 250 used for 14 years MODEL
This type of Exhaust System Slider is manufactured by Manufacturer's HPetc. Large bodies, many of which are attached to mopeds and Scooter type, "Is not it suitable for medium size Motorcycle or Large type Motorcycle?" I think, at least this time Ninja 250 (MODEL 2014) It showed its performance.
Only once after installation (During turning) I got standing, but the Exhaust System was intact.
However, it seemed that I could not bear the weight, so the mounting Bolt bent.
However, I just bent a little, so I replaced it with a new Bolt and settled.
Since there is also a Dress-up effect, why not try installing a heavy Motorcycle?
* Ninja 250 is a space for gaps "Pon attachment" can not.
Please prepare Spacer of 3mm ~ 4mm separately.
I used KITACO for M 10 Spacer 3 mm thick (0900-093-01017) , Mad Star's Aluminum Washer Set of 10 pcs. Thickness : 1mm (S-252) 2 types of is.
The outer diameter of Spacer is the limit of 16 mm.
View detail
Standing etc. To those who want to protect the Large exhausted Exhaust System from
This type of Exhaust System Slider is manufactured by Manufacturer's HPetc. Large bodies, many of which are attached to mopeds and Scooter type, "Is not it suitable for medium size Motorcycle or Large type Motorcycle?" I think, at least this time Ninja 250 (MODEL 2014) It showed its performance.
Only once after installation (During turning) I got standing, but the Exhaust System was intact.
However, it seemed that I could not bear the weight, so the mounting Bolt bent.
However, I just bent a little, so I replaced it with a new Bolt and settled.
Since there is also a Dress-up effect, why not try installing a heavy Motorcycle?
View detail
In case of emergency.
Installation is very simple as it is Bolt one. It is cheap, but the making is very good impression. I am happy that both 8 mm hole and 10 mm hole corresponded. Bolt also comes with a total of 4 M8 x 2 & M 10 x 2. I installed on the bottom of the Exhaust System to protect the outside exhaust system. View detail