Reviews
SPRINTStyleMirror
Stylish, easy to check backward View detail
Fits: YAMAHA CYGNUS X, YAMAHA BWS125(BWS), YAMAHA BWS125(BWS), YAMAHA CYGNUS X
The look and feel is GOOD!
[How is it used?
Town ride
Was the one you received as per Image?
It was just like the Image. The texture was also matte!
Was the installation difficult?
If the brake lever can be replaced, it can be done, but it is necessary to remove the front cowl.
No interference with Cowl and it is a pontoon installation!
How was your experience with it?
This was not what I was expecting, but the grip is matte, non-slip and easy to hold!
Lever adjustment is not wide but can be done somewhat.
I'm satisfied with the price and texture of the Large change, it's a Recommendation.
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
You can taste the change in acceleration at low Cost!
[How is it used?
It is generally considered to be possible to install without problems.
Was the one you received as per Image?
I think the placement and design of the Logo is a bit likeable, but I don't think it's a problem.
Was the installation difficult?
Installation is not so difficult. (With Manual)
[Included Parts:were they on?
It was a complete product.
[Was there anything that disappointed you?
When the unit is installed on a unit that is in good shape, some may be concerned about the reluctance to return to normal operation.
View detail
Ime Chain around Handlebar!
[How is it used?
Used on a commuting motorcycle. I had to replace the OEM handlebar because it was sticking out more than the handlebar when I was sliding through.
Was the one you received as per Image?
The Image was exactly as shown, and the Included Parts:was also fine as described.
Was the installation difficult?
Large is sturdy as long as you are careful not to turn the Screw when changing the Type of Screw. Also, it is difficult to check the angle of the Lens when attaching it to the Body.
How was your experience with it?
The blue lenses are the key to preventing glare from the sun. The narrower Mirror makes it easier to slip through.
[Included Parts:were they on?
Please note that only 1 pc of the 10mm reverse screw type is included in the "Included Parts:".
[Was there anything that disappointed you?
Vibration causes blurring of vision more than expected.
View detail
KOSO Koso SPRINTStyleMirror
This is a replacement for the OEM Mirror. Installation is simply as per the Instruction Manual.
Separate Washer is required for installation on MT-09.:Pair (for Left and Right) The Mirror looks a little darker than I am used to, but it is not glaringly bright in the summer sun. This is my impression on the first day of installation, so I am looking forward to seeing how it will be used in the future.
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
Reduced wrist strain
Unlike the OEM, the accelerator operation without grip return is great. It seems to reduce the burden on the wrist! It's hard to see, but there is an Axel opening scale, which will be useful for setting the fuel condition. View detail
Fits: YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA CYGNUS X, YAMAHA CYGNUS X FI
Just Right High Solo
'07 Used for SE44J
The shoulders don't drop like the OEM, and you can fully open Throttle with just the Limit wrist.
I was expecting to be able to open it all the way with just my wrist … so right after I put it together, I thought it could be a bit more High Solo.
When I thought about the time when my body bounced on the rough road surface, I reconsidered whether this much was just right.
For better or worse, this is the High Solo condition that I wish was OEM….
The machining accuracy is good and the installation is smooth.
The needle of the Indicator interferes with the Switch area, so it needs to be shaved a little, but that's about it.
Also, it's been about a year since I installed them and I don't notice any fading of the RedAnodized.
In general, I was more than satisfied with my expectations.
View detail
Fits: YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA CYGNUS X, YAMAHA CYGNUS X FI
You need to understand the structure and build it properly.
I chose the CYGNUSX-SR for commuting because I wanted to convert it to High Solo and make it easier to use Axel's AssistLever.
About installation
The machining accuracy of the product itself is fair to good.
Pin for rotation prevention is attached to the Holder, so it is easy to position the Handlebar.
If you install it by yourself, we recommend that you look at the NORMAL installation position carefully before you start.
In particular, the positional relationship between the play, pull and return of the accelerator wire and the position of the screw.
Basically, these parts can be installed without any modification.
Material:The aluminum throttle sleeve has a two-piece structure with the sleeve and the plate of the Thailandco part that hooks the wire, and is screwed into one part.
You need to be careful about this. If you twist it more strongly than necessary in the fully closed direction, it will loosen. So I fixed it with screw lock material and reassembled it.
About the feeling of use
The Axel operation is a little heavier now that it's in High Solo, but I feel it's acceptable.
You can feel it when you back off the throttle.
The gauge that shows the opening degree is preeminent in the custom feeling (although it is meaningless in the injection car).
View detail
Fits: YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA CYGNUS X, YAMAHA CYGNUS X FI
Is it easy on your wrist?
Because the Axel opening degree is large, the moped with many full openings is hard on the wrist Because it is for the neighborhood, there is a lot of Stop & Go in its own way To make it a little easier, I put High Solo on it
Installation of the Body is easy, but I removed the Cowl in order to raise the workability It's easier to install the body without the cowl, and if you do the replacement of the lever at the same time, you can reduce the time and effort When the engine was installed, the Idling was slightly elevated, so I adjusted it
It wasn't as high Solo as I was hoping for, but my wrists are a little more comfortable
I know it's an individual difference, but the gauge pointing to the Axel opening interfered with the Cowl Nipper and cut a bit You won't see the gauge on the actual run
View detail
Fits: YAMAHA Jog 100, YAMAHA jog, YAMAHA JOG90, HONDA DIO100 series, HONDA DIO90 series
It's okay
Adhesive Sticker's adhesive strength is weak, LeftGrip got into Kucchaca upon insertion and gave up failing. Axel side entered Shibori, succeed! But, in Remote controller jog, you can see that Grip is long and Handlebar is short at Skeleton department. Those who are interested can not Recommendation, but I am satisfied personally! View detail
Fits: YAMAHA Jog 100, YAMAHA jog, YAMAHA JOG90, HONDA DIO100 series, HONDA DIO90 series
KOSO KOSO Limited Grip Review
KOSO KOSO Limited Grip This handgrip from KOSO's office is brightly colored, reflective and economical, works well for drivers who like colorful decorations on their cars. KOSO KOSO Limited Grip The KOSO KOSO Limited Edition hand grip is light and economical, suitable for riders who love to decorate the car.(translated by Google Translator) View detail
Fits: YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA CYGNUS X, YAMAHA CYGNUS X FI
Mounting on CYGNUS SE12
I was commuting to work 30 kilometers each way, and my wrist became tired, so I made it into High Solo.
Installation attached and it attached without problem. (No processing) But!
This product is to understand the opening degree of Axel, but it does not look when actually installed.
There was something like Memory 's Guide - Plastic, but because it interferes with the Switch box,
I removed it.. You can install it if you scrape between Holder and Box, but I have no time to look at Axel opening, so I thought whether it was good for NCY or High Solo from AdvancedPRO. (I simply chose KOSO because I liked it)
As for operability it became easier to get on.. Even without bending the wrist so much, I opened it for a while and it was 60 o'clock in no time
View detail
Fits: Others Universal
It is ♪ with a good field of view, without this Mirror running by vibration, although the old Mirror has run by vibration of two strikes.
It is ♪ with a good field of view, without this Mirror running by vibration, although the old Mirror has run by vibration of two strikes. View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
It has attached to the cygnus X of 07 cab specifications. It compared pure and play was almost lost. It was exactly at me who like the direction [ necessity / seldom / a direction / play ]. since -- which cannot be recommended to the one [ wan
It has attached to the cygnus X of 07 cab specifications.
It compared pure and play was almost lost.
It was exactly at me who like the direction [ necessity / seldom / a direction / play ].
since -- which cannot be recommended to the one [ want / play ]
View detail
It attached to the cygnus X. It is sometimes only called GT mirror and he is preeminently smart!! Since a mirror vibrates very much by vibration of an engine by the mirror of smile size texture although visibility seems to be good, visibility is not s
It attached to the cygnus X.
It is sometimes only called GT mirror and he is preeminently smart!! Since a mirror vibrates very much by vibration of an engine by the mirror of smile size texture although visibility seems to be good, visibility is not so good (if it gets used, how does not have things).
View detail