Reviews
To manage the Torque
I used to tighten Nut and Bolt by feel, but now that I do my own maintenance and customization to some extent, I want to properly tighten them with the specified Torque, so I bought them.
I don't know if the Torque on this product is accurate, but it is much safer to work with than my own senses.
View detail
Convenient to carry
The small size makes it convenient to carry and effective for use in tight spaces or in places where there are no angles.
The large size of the driver tip can be selected from a wide variety of sizes to accommodate almost any task.
View detail
Torque in Motorcycle Maintenance can almost cover
Low Torque for Drain and Plug uses sister product ETR3-25.
I bought this because I liked it.
I don't know if this is an individual product issue, but when I set the Torque and Snap, the neck bends and the Torque is set back to Zero.
When I rotate the Body lever, it is stuck and will not turn.
It is unfortunate that it has to be turned once in the tightening direction before it can be loosened.
This is not the case with ETR3-25.
The Torque range is larger than that of ETR3-25, so the letters are written in detail and are difficult to read for the old eyes.
View detail
For tightening of Drain and Plug
I have a SK11 Digital type, but I like the snap sound of Analog.
I was looking for a low Torque for tightening the Drain and Plug as per Title.
The main thing that attracted me was the colored text part, which made it easy to read.
View detail
Easy drilling
Useful for removing Gas from Spray cans.
Tapping can cause sparks, so this product can be used to safely remove Gas.
It can be adjusted according to the thickness of the can, and the hole can be opened without effort.
This is helpful because it prevents the remaining contents from spewing out.
View detail
Useful
Useful for picking up Bolts and Nuts dropped in tight places.
The Magnet is powerful enough to lift firmly.
View detail
It works just fine, but...
I bought this as a spare for miscellaneous use.
It is easy to use, and once Dial is aligned and fixed, it is measured.
Same as a normal pre-set Torque wrench.
I compared the measurements to Snapon to see if they were off by a large amount.
I think it is an acceptable score since it is almost the same.
It was good in the initial stages, but durability is unknown.
Isn't Speed fast losing accuracy? I have a suspicion that
In the end, I ended up using only Snapon.
If you are thinking that you just need to be able to measure for reference purposes, it would be okay to buy one.
View detail
Satisfied with the cost. For spare parts.
Purchased for spare parts and for air guns.
I haven't used it yet, but I thought it would work fine.
I like the Compact Holder.
View detail
For now, Quantity:Set
I don't get to use it very often, but Quantity:The quality seems to be fine, but it took a long time to deliver because it was not in stock. The quality seems to be fine, but it took a long time to deliver because they didn't have it in stock, and I bought it in addition to other things, so I felt a littlemmmm. View detail
Easy to use
[How is it used?
I bought this for my graduation from Hand Wrench.
I had a torque wrench to tighten the wheel nut etc., but I didn't have one for SmallTorque, so I chose this product which has a moderate setting range and is inexpensive.
Was the one you received as per Image?
I didn't expect much since it was inexpensive, but the texture is better than I expected and it comes in a plastic Hard case.
How was your experience with it?
Loosen the screw at the bottom and set Torque to Quantity.:Set and retighten to set the Torque without tools.
I felt that the Click feeling when it became the Torque which I set was sufficient. In a certain site, there was also a person who said that the Click feeling was too small, so there may be individual differences.
I think it's easy to use because you don't need to change batteries with Mechanical, and you can use it quickly and easily at any time.
In addition, I was a little disappointed that there was no Release of Socket. It might be unavoidable considering the price.
[Points to note]
There is nothing special about it. I think this Torque wrench is easy to use even for beginners.
How did it compare to other products?
Compared to the Large Torque wrench for Wheeletc. that I have, it is naturally lighter and easier to use.
But, as I wrote above, only the place where there is no Release of Socket was disappointing. (Because the one for Wheel has Release)
【Review】
This Torque wrench is moderately large and easy to use.
If I wanted, I could set up to 30N-m and if there was a release mechanism of Socket, it would have been a perfect score.
View detail
perfect
its perfect for daily use. everytime u can use it for in the house or daily small jobs for bike services. good price for quality. View detail
A multifunctional product that can be used for a long time
I've never Large Torque tightening, I bought it because I needed to turn Large fine-tuned Nut.
This size (nominal size 220mm?) is not easy to open the mouth to the largest 36mm width.
The other manufacturer's products are terribly large. (= high) We can only handle
You can also use it as a pipe wrench by flipping the jaws 180 degrees and replacing them.
The soft grip prevents your hand from getting sore when you turn it with a lot of force, unlike all Gold products.
I think that it is a product that deserves consideration enough when it is one additionally because the rattling of the chin that becomes matter of concern with the MONKEY Wrench is not especially large, and there is also a wide range of use.
View detail
For MaintenanceTorque Management
[How is it used?
I bought this for Torque management when installing Plug and Point coveretc.
Was the one you received as per Image?
The texture was better than I thought it would be.
How was your experience with it?
I have the impression that it is necessary and sufficient for what I am using.
[Points to note]
I think the Click sound is a little too small, so it's important to use it carefully.
How did it compare to other products?
I don't have another one, so I can't compare, but if you're an amateur using it for simple maintenance, I think it's a good choice because it's affordable.
Other items that would be helpful
Opinions and requests for Items/Manufacturer that should be purchased together
Socket etc. are not included and need to be purchased separately.
View detail
Enough for the Sunday mechanic.
[How is it used?
When I bought the motorcycle, I wanted to do simple maintenance (oil and plug replacement, etc.) and I bought it.
Was the one you received as per Image?
I was worried about the inaccuracy and cheapness because of the reasonable price, but the workmanship was good and there was no particular problem in use.
How was your experience with it?
The size of the Socket is also wide, and Ratchet is also easy to use. In addition, because Case is also made of the genus Gold, there is a sense of luxury and I am satisfied.
[Points to note]
Because of the low price, there are concerns about durability and system problems, but there are no problems in performing simple maintenance.
How did it compare to other products?
I haven't used expensive high quality tools before, so it's hard to compare, but I think it's more reliable than using other very cheap tools.
Other items that would be helpful
Items to buy together
By purchasing Torx wrench together, you can divert the Socket and expand the range of maintenance.
View detail
Much easier to use than I thought.
I used it to fasten the screw when I changed the Disc Plate (Rotor) of Rear. I've never had to worry about Torque before. "That's about right. I've been doing this for about 40 years, but recently I've started to worry a little, probably because I'm getting older.
This is the first time I've bought a Torque wrench, and although I was worried about the price difference between several products, this one was the right choice for me. I'm glad to say that the width of the setting Torque is wide and it feels quite solid and trustworthy.
This time, I did Plate fastening with 30Nm. This is because it was mentioned in the Plate Instruction Manual of brembo that I bought. When the specified Torque is reached, the Head bends with a crunch. It's a little bit of a bend, but you can definitely feel it because it's clearly there and you can feel it.
But is the Torque correct? I'm sure there's a question about that, but there's no way to find out... but from my own experience so far... "That's about it. I think it's so-so right. (Sorry for the lazy comment)
View detail
I use it on the Plug socket of my Small diameter Plug.
I bought this to manage the tightening torque of the Plug.
The Torque setting part is a little difficult, but once you set it up, the rest is easy.
It comes with a hard case to help you store your precision equipment.
I think this is the best Plug socket for Small diameter Plug.
View detail
Safe Gas Extraction
This is a convenient and safe way to remove gas from spray cans after use. With Rubber Cap, it is easy to remove the gas from the can. View detail
Powerful Magnet.
This Magnet bar is very useful for picking up Bolts and Nuts that have fallen out of your reach. The angle of the magnet at the tip can be changed conveniently. View detail
GREATTT AND USEFULL
its great tool and so quality. it has everything that you need in just one box. thx for quick shipping..10 DAYS ARRİVE TO TURKEY View detail
eValue Lock hand clamp
I bought the Lock hand clamp from eValue. The lock hand clamp is very easy to unlock. View detail