Reviews
Fits: HONDA CB1100, HONDA CB1100N, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000A2, HONDA CRF1000A2, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D2
I bought it as Repair Parts because it was damaged over time!
[How is it used?
Wounding and rust etc. due to age-related deterioration of the mirrors and mounting screws were noticeable, so they were replaced together.
How was your experience with it?
New products have a different shine.
How did it compare to other products?
OEM Product combination is better than Mirror made by other companies.
[Points to note]
Quantity of Mirror and Adapter and this Cover:1 Set of 2 3-items is required, so the expense is high.
View detail
Fits: HONDA CB1100, HONDA CB1100N
I bought this as Repair Parts for my damaged Mirror!
[How is it used?
Rust and wounds became noticeable with age, so they were replaced.
It fits perfectly with the CB1100 2010.
How was your experience with it?
It is indeed an OEM Product. Easy to read, easy to adjust, and great.
How did it compare to other products?
Since universal products made by other companies are not always the best, OEM products are still the best.
[Points to note]
It is slightly lower in height than the 2010 Mirror.
▼The lower height of the Mirror gives more room for the Motorcycle Cover.
View detail
Fits: HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750
Best
made this purchase and was very happy when I saw that I would receive my items in just a matter of 3-4 days. AMAZING! As it came on timeThank You very much. I recommend Japan Webike for all your motorbike and auto parts. Thanks again. View detail
Fits: HONDA CB300F
สินค้าของแท้ ตรงตามความต้องการ เพียงแค่ทราบรหัสสินค้าก็สามารถเบิกอะไหล่ที่ต้องการได้อย่างง่าย ใช้เวลาจัดส่งไม่นาน View detail
Fits: KAWASAKI NINJA 1000SX, KAWASAKI NINJA 1000SX, KAWASAKI NINJA 1000SX, KAWASAKI NINJA 1000SX, KAWASAKI NINJA 1000SX, KAWASAKI NINJA 1000, KAWASAKI NINJA 1000, KAWASAKI NINJA 1000, KAWASAKI Ninja 1000SX
Countermeasure Parts for Ninja 1000
The Clutch Cable is easily broken until the second generation of Ninja 1000.
I snapped too.
Since the third generation, the parts have been replaced with countermeasure parts.
The Gold section is moderately Curved, which makes it difficult for the Wire to hurt.
Up to the second generation, the exchange is RECOMMENDED.
Like not being able to cut Clutch on the go? It is just a fear.
Since this is an OEM Product, it is OK to install with a pontoon.
Replacement is easy.
Cable handling is a bit of a challenge, though.
It takes a little hang to pass over the Radiator.
View detail
Fits: YAMAHA AG200, YAMAHA YP250 MAJESTY, YAMAHA YP250 MAJESTY, YAMAHA YP250 MAJESTY, YAMAHA YP250 MAJESTY, YAMAHA YP250 MAJESTY
This is a standard OEM diversion.
Tell us how you use it]
This is a rubber cover for the lever lock (part number 36X-83965-00) used in the Yamaha AG200. I installed a special rubber cover because it looks like it will rust after a while of use.
Was the one you received as per Image?
The squishy Rubber cover is very flexible.
Was the installation difficult?
If the lever is OEM, I don't think it will be fiddly, but if it is an adjustable lever, it will be a bit of a pain. I use ZETA Pivot Lever CP/Clutch 4-fingers for Public Road Folding TypeClutch lever on my D Tracker, and the SpringCase protrudes on the bottom side of this lever, so the Rubber I sprayed silicon spray on the inside of the cover to make it more slippery, and then managed to push it in. Because of the protrusion, the entire rubber cover was pulled in one direction, so the belt for fixing the rubber cover also seemed to fit in a limited way.
How was your experience with it?
It was difficult to install, but so far I have not had any Gap or dislodgement while using it.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not particularly
View detail
Fits: HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R, HONDA CB300R, HONDA CB300R, HONDA CB400T, HONDA CB400T, HONDA CBR250R, HONDA CBR250R, HONDA CBR250R, HONDA CBR250R, HONDA CBR250R
Left handle lever pivot cover Honda Monkey 125
During the process of restoring my Honda Monkey 125 to full OEM specifications prior to selling I had to replace the clutch lever pivot cover as it had been damaged from a fall. Honda OEM parts finders make the job very easy to locate the part number required and the part supplied is exactly the same as the previous one and what I was after to get the bike looking like it did out of the fatory. View detail
Fits: YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA ZUMA 125, YAMAHA ZUMA 125, YAMAHA ZUMA 125, YAMAHA ZUMA 125, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VMAX
Yamaha OEM Nut, Crown
Original nut in the rearview mirror on Yamaha YZF R1 RN12 05. The nut is screwed into the mounting of the rear-view mirror and because of this it is tightly holding a rearview mirror, does not give the rear view mirror moving. View detail
Fits: YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA XSR900, YAMAHA XSR900, YAMAHA XSR900, YAMAHA XSR900, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA MT09, YAMAHA MT09
Yamaha OEM Nut
The original nut in the windshield on the YAMAHA YZF R1 RN12 05. The quality of the nuts is excellent. I bought from you to replace my old nuts. Because they were badly worn out. If the nuts are tightly clamped, then over time, the nuts in the windshield begin to crack. The main thing is not to squeeze them strongly in the windshield. The nuts are for securing the windshield. View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1
Yamaha OEM THROTTLE CABLE ASSY
The original throttle cable for YAMAHA YZF R1 RN12 05. I bought it to replace my old throttle cable. Because the old throttle cable, it broke. I also bought a gas cable in stock. View detail
Fits: YAMAHA R1, YAMAHA YFZ-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA R1, YAMAHA R1, YAMAHA R1, YAMAHA R1, YAMAHA R1 50th Anniversary, YAMAHA R1 50th Anniversary, YAMAHA R1 Limited Edition, YAMAHA R1 Limited Edition, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YFZ-R1 (YZFR1WC)
Yamaha OEM HANDLEBAR
The original handle on the YAMAHA YZF R1 RN12 05. The material is good, strong, lightweight. After the previous owner, I changed the handle, as it broke on the mounts. I installed a different handle, now everything is fine. The right stick was hard to find in the aftermarket on the YAMAHA R1. I have fallen off my motorcycle several times, the handles are strong and even. View detail
YAMAHA OEM CABLE, CLUTCH
I bought from you several times a clutch cable for a Yamaha YZF R1 RN12 05, because the cable was torn. Also available in stock. I plan to buy more in stock. View detail