Reviews
Fits: DUCATI STREETFIGHTER S, DUCATI 848EVO, DUCATI 848, DUCATI 1299Panigale, DUCATI 1299 Panigale S, DUCATI 1199Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale S/Tricolore, DUCATI 1098S, DUCATI 1199Panigale R, DUCATI 1098S, DUCATI 1098R, DUCATI 1098, DUCATI 1098, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S Touring, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S Granturismo, DUCATI 899Panigale, DUCATI Multistrada 1200S Pikes Peak
Good design. However, the hexagonal hole is delicate.
Coloring and design are both cool and satisfactory.
However, it should not be used for frequent removal/attachment, as the hole slips easily due to the aluminum material and 3mm hexagonal hole, which is designed to emphasize design.
If there is a lot of removal and installation, I personally recommend Ducabike with 4mm hex holes.
View detail
Compact
Folding Container20L
The quality is good and the SIDE middle window allows for loading and unloading. However, the price is high. I wish there was something with a lower price and the same quality, etc.
View detail
Before you get into trouble for wrapping vinyls.
[How is it used?
Used for protection after Wiring process
How was your experience with it?
Compared to regular vinylite, it is much easier to use because the Tape thickness is thinner to begin with.
The adhesive itself is quite strong.
I even tried peeling it off after a few days, but the adhesive did not remain on the Wiring side.
It is more cost-effective to buy this vinyl than to use commercial vinyls and get into trouble.
[Points to note]
It is a little sad that the appearance of the roll itself is no different from that of a vinite.
View detail
Universal but...
I was looking for a Universal Oil filter wrench and found this one.
Compared to other companies' products, we chose this one because it can accommodate a large diameter.
In fact, I used it for Oil replacement and found it very nice that the Socket is compatible with 9.5 and 12.7.
However, the part that grips the Filter is still bare steel, so it will scratch the Filter when tightened.
The Oil Filter is basically out of sight, which was a little disappointing.
View detail
On roadMain for people who clean regularly.
[Feeling of use]
Brush has 3 sides for quick cleaning.
The softness of Brush is hard.
Brush is hard and dirt bounces off when rubbed hard.
Brush is difficult to apply to small areas, so it is better to prepare a soft brush separately for hard stains.
(Points to note)
Brush width can be changed, but when the width is made narrower, the brush cannot be fixed and immediately comes off, making it unuseable.
View detail
Suitable for portable, not stationary
Purchased to adjust air pressure at Circuit.
Since the capacity is small, filling a single tire is not efficient because the air runs out. TradeOff is unavoidable if the limited loading space is to be used effectively.
It is not a quiet Type and is not suitable for home use.
The 100V power supply type is perfect for use as a portable Small Type Compressor with a generator.
Other negatives are reasonable considering the price and Size.
View detail
To Harness Organizing
I used it to organize my own Harness. Easy to use! View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300 SUPER FOUR SP, HONDA CB1300 SUPER BOLDOL SP, YAMAHA MT03, YAMAHA MT-07, YAMAHA MT-25, KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI VERSYS-X 250, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, HONDA NC750X, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR
I'm going to scratch the Oil Filter.
Used to replace Oil and Filter in Versys-X250.
The previous installer seemed to have installed the filter in a very Torque and it took a lot of force to remove it.
The filter was quite wedged into the filter, so its removal was a bit odd. The filter is a discarded filter, so the M10
It was extruded with Bolt.
I would like a little more rigidity in terms of the feel when installing. It becomes floppy and makes me feel uneasy when I apply force.
Wrench removal after filter replacement is difficult because it is embedded in the filter to a small extent.
The M10Bolt cannot be used because it will scratch the head of the replaced Filter (put a Rubber or something in it and push it out?).
It works fine, and the cost is great, but the price is right.
View detail
![PREMIUM ZONE Cap boltCollar [for M8 Bolt].](https://img.webike-cdn.net/catalogue/images/15903/91926_1_TS.jpg)
The color is different because it is a good opportunity!
Since the OEM was a subdued color, we purchased a different color, Blue.
Since the Screen Offset Bracket is made by DAYTONA, it is the same shape and color as the Screen Offset Bracket.
Well, as long as it's beautiful, it's fine. In a way, it's also called individuality. 。 That's fine!
View detail
Chain cut
Since the installation chain is unknown, I bought a little longer and bought this one for a trial because it was cheaper here to cut it.
Although it will not be used often, it corresponds to chain size, 420 to 530, so it will be useful to have 1 pc.
It seems sturdy for the price, and seems to be fine for use.
View detail
To the last (Urgent) tool
It is not easy to use and is not good for emergency use. View detail
historical legacy
Wow, so many people writing imprements on just Nozzle!
When I was on my 2nd, I kept a 1 liter can at the fueling port in the back of the car. Replenishment." The best time to do this was when I was
We didn't weigh the Levels exactly, and it was routine to dispose of the entire can after 3 or 4 refills (and it was free back then).
On the other hand, when pouring more than 3Liter in 4st Engine oil change, there is not much Merit.
It would be much faster to transfer the required amount to a jug or use Bellows long funnel...
But there is something quaint about attaching it to the mouth of the G1 one at a time and waiting for the last drop to fall out.
I think it is a gem that has supported Sunday Motorcycle.
View detail
![HexStainless bolt [M8]](https://img.webike-cdn.net/catalogue/14190/08100054_53e6441b8fe92_TS.jpg)
Stainless bolt
Exhaust System fixing parts are rust-resistant Material:Changed to Stainless Steel.
This makes it rust-resistant and looks good.
View detail
Rivet fixed
I am buying more because they are easy to remove and install, do not scratch the fixed parts, and are reasonably priced.
I feel that a little more length would be good for fixing, but it is useful for fixing.
View detail
![Clear Tubeless Kit 3-Piece Set [Repair/Optional Parts].](https://img.webike-cdn.net/catalogue/images/75414/image006_TS.jpg)
RepairKit with air leak prevention fluid.
I need this for Air Leak Repair for Repair because the Tubeless process of FRWheel is very Large and strange when I work on it by myself. If possible, I would like you to add air leak Repair fluid as well. The extra Tape was useful for preventing scratches on Frames, Guards, etc. View detail
peeling off
I purchased this product in the hope that it could be used to remove Packing, Rubber, and Sealants.
The tip of the blade is a size and both tips are taper shaped, so it seems to be good for use.
View detail
Fits: HONDA CBR400R, HONDA CBR250 R (MC41) FNo:MC41-1400001-, HONDA CBR250 R (MC41) FNo:MC41-1200001-, HONDA CBR125R, HONDA CBR250 R (MC41) FNo:MC41-1000001-1099999, HONDA INTEGRA FNo:RC71-1000001-, HONDA JAZZ, HONDA LEAD 110 FNo:JF19-1200001-, HONDA LEAD125, HONDA MAGNA 50 FNo:AC13-1000010-1599999, HONDA MAGNA 50 FNo:AC13-1600001-, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA NC750 FNo:RC70-1000001-, HONDA NC700 FNo:RC71-1000001-, HONDA NC700 FNo:RC63-1000001-, HONDA NC700 FNo:RC62-1100001-, HONDA NC700 FNo:RC62-1000001-1099999, HONDA NC700 FNo:RC61-1100001-
Cospa is nice.
O-ring for CROSS CUB (JA45) level gauge
Once a year or so, when oil stains from the threaded part of the Level gauge become noticeable, we replace it.
View detail
Cospa is nice.
CROSS CUB (JA45) ORing of Oil Filter section.
When replacing Filters every two Oil changes, it is inexpensive and cosmetic.
View detail
Nozzle
I think the product is good.
I changed the engine oil for the first time in about 10 years.
I was very enthusiastic, but the oil leaked out of the BWS125 because the place where the engine oil is put in is at an angle.
Next time I will use Funnel. But my hands get dirty too, so I may leave it to Shop.
View detail
Heat and scratch protection
The evaluation did not seem to be bad, so I bought it to try it out.
Since it seems to have high heat resistance, it is used to prevent heat deformation and scratches on the inside of cowls. The price is not that much, and there are a few meters, so it can be used to some extent. I would like to check the adhesiveness for a while.
View detail