Reviews
Mirror is quite thin.
Installation is very easy and requires no special tools.
Mirror is quite thin, and before installation I can see right through their faces." However, when used outdoors, it seems to be surprisingly translucent.
Color:I chose Sky Blue, but the vision is yellowish.
It is uncomfortable at first, but eventually your brain compensates and you don't care.
but the visibility is still NORMAL. [Color] Compared to Clear, it falls off. It feels much darker, especially when entering Tunnel.
I knew that, but it seemed darker than I had imagined, Visibility." is -2
Also, the Shield is now hard to raise and lower. Quality and texture was set to -1.
View detail
Cospa best
[How is it used?
Helmet hung on Mirror and locked.
Was the one you received as per Image?
Street Image
Was the installation difficult?
In my case, it was a little troublesome because I had to remove the brake lever to install it, but it's easy to install if it's in an easy-to-mount location.
How was your experience with it?
Hang your helmet on Mirror for peace of mind when you leave your motorcycle
[Included Parts:were they on?
No
[Was there anything that disappointed you?
nothing special
With or without Instruction Manual
As an anti-theft measure, the mounting screw is hexagonal, so it can be easily removed with a tool.
View detail
Might as well take the first step...
When I was looking for a model with Inner Visor, SHOEI was expensive and KABUTO's Graphic was not to my liking (Pin lock is not standard either!!!). So, when I was wondering about it, I came across it.
I was worried about the fitting for FOR JAPAN MODEL, so I checked it at the store where the actual product was placed, and the fit of my head, which is usually M for SHOEI and M for KABUTO, was just in the middle of the Image for LS2 (15 minutes wearing).
After actual use (about 6 hours of rest every hour and a half or so), I was able to use it without any concerns.
I would have been happy to give it 5 Stars,
Paint may be weak...Paint was chipped off by tipping (I don't remember any domestic model having paint chipped off by tipping).
As other people have said in their impressions, the air flow from the upper Intake to the domestic MODEL is very small, and the air flow from the upper Intake to the domestic MODEL is very small.
It is difficult to feel (? not to say it is not effective, but it is difficult to feel)
Therefore, we gave it 4 stars.
However, considering the design and price, I think it is highly satisfactory.
View detail
attachment (Removal before) is difficult, but worth the effort!
Spare parts for N60-6SPORT, a new model of 2024.
Purchased as it can be installed on N60-6.
Was the one you received as per Image?
This is the Spoiler of the image itself.
Was the installation difficult?
It was difficult to remove the existing Spoiler before installation.
[Included Parts:were they on?
No Instruction Manualetc.
[Was there anything that disappointed you?
NO
Points of installation and hang
Removal of existing Spoiler.
As you can see from the RASSpoiler, there are three Hooks.
First, lift and remove the Rear Hook,
Next, remove the top of the head by pulling it backwards,
Finally, remove both SIDES as if you were lowering them.
It all takes a lot of strength. It may not be possible for a girl to do it….
Please refer to the image.
Notes
After installation (Naturally it is) Inside the Spoiler you will find (Spoiler must be removed). unaffordable
Helmet, inside Spoiler should be Beauty.
Also, if you touch the inside side of the Spoiler during installation, fingerprints, etc. will be left behind (laugh).
Items to buy together
Interior removal spatula for 4-wheel (Material:Plastic) might make things easier.
View detail
First full face helmet
I was anxious about wearing a full face helmet for the first time, but when I put it on for the first time, the visibility was as wide as a jet helmet, and I can't say enough about how impressed I was with the touring. View detail
Fits: Others Compatible with CPB-1VShield, Others Glamster
U-LOOK Blaze MirrorAnti-FogSeat
[Color] As a Smoke Mirror shield user, the ability to convert the OEM Clear shield to Mirror will help prevent the Mirror from peeling off due to cost savings or pebbles, etc.!
No distortion and the view is easy to see in Mirror.
View detail
I wanted it to be included from the beginning... Helmet holder
Easy to use and reasonably priced. It is a satisfactory product if you are not particular about the price! View detail
good
Color:Yellow was purchased.
It could have been a little darker for daytime use.
Night visibility is good.
When installing the helmet, there was some rattling depending on the type of button on the helmet side; inserting the aluminum tape eliminated this rattling.
The included ProtectionRubber was too thin to fill the gap.
It comes in when it rains.
but it was comfortable and not foggy. I think the gap served as ventilation.
IncomeI put it on, but there is some wind roll in from my chin and noise in the Microphone.
View detail
Nice try!
I chose SizeS.
At first I had a pain in my forehead area, but now I don't want to get used to it.
The design and functionality (ventilation and buckle) are also very good considering the price, but there is one drawback.
The inside of Shield is easily damaged.
Just wash and wipe off the dirt and it will be a little scuffed up.
Why ????? when the outside is fine?
That's too bad!
View detail
It is outstandingly light!
Was the one you received as per Image?
It is cooler than it looks in Catalogue.
[How did you feel about the Fit?
It seems to be a Japan-only spec, but the inner pad is harder than the Japan product.
It is hard and rough and has a low Fit feeling.
How was your experience with it?
The lightness is outstanding, I always had neck pain with SS, but my head was light and easy.
The aerodynamic characteristics are also better than OGKShoeema.
Wind Cutting sound and quiet characteristics are normal.
What are the specifications of the product?
Ventilation is normal within legal speed limits.
Included Parts:is a good value for the money.
It even has a Dark smokeSeal, Pin lock and ShieldFilm.
[Was there anything that disappointed you?
When the Shield lock is opened by Button type, there is no flange on the Shield.
It is difficult to open.
The cap is not compatible with wireless microphone.
Fit feeling is quite low. 。
How did it compare to other products?
Material at this price:Carbon products are not found in domestic products.
It is lightweight and has good aerodynamic characteristics.
The interior quality and fit feel is low.
Other items that would be helpful
Deciding Factors for Purchase/Included Parts:Presence or non-existence of Included Parts/Points to Note/Opinions and Requests to the Manufacturer
Rear spoiler is available as an Option.
View detail
Quantity:Set purchase is recommended.
I think it is good because it is dedicated to this product. The quality and functionality are just as I expected, and I have no complaints. View detail
Good fit
I like LEAD's Helmet because of its high cost performance.
I think the size is a little loose, but it holds up well.
Opening and closing the chin guard requires a lot of force. sun visor did not interfere with Glasses.
The cap is Large size and a bit heavy, but it's a System helmet so it's probably TradeOff.
The ventilation area is very elaborate with Qu-Rear Parts, red stitches, and other small details.
It will be useful for rehydration etc. in summer.
View detail
Fits: Others Compatible with CWR-F2Shield, Others Compatible with CWR-F2RShield, Others X-Fifteen, Others Z-8
Cost-effective!
OEM Mirror shields are expensive, but this product provides the same level of replacement as Mirror shields and is very cost effective.
However, it was necessary to adjust the Pin lock with the adjusting Screw to make it adhere.
View detail
The weight is not so heavy.
It doesn't feel as heavy as I thought it would be; the Chin guard is heavy and difficult to move up and down with one hand; the lock feels hard to engage. Inner Visor works and feels comfortable.
This is my first System helmet, but I don't feel the need for a System helmet yet, regardless of this product. In my case, I think I'll be fine with full face. Maybe I will be able to feel the benefits when it gets hotter.
View detail
I think it's practical.
I had been using a helmet holder that attaches to the Back Mirror, but it was a little inconvenient to use, so I was looking for something else.
I chose it because it is Dial lock and because it is fixed with Wire.
Installation on the Handlebar is easy, but using one Spacer interferes with the Back Mirror and Wire, so I used two of each to hold them in place.
There are many gaps when viewed from the side, but the gaps are necessary for Wire winding.
The only point of concern is that the Dial is a little hard to turn in Small, so it is difficult to use with gloves on.
View detail
This is a RECOMMENDATION for people with a LARGE head!
I'll be right there. I bought this helmet exclusively for use on my ThirdMotorcycle moped. I have a large head and even a size XL helmet feels tight, but with this helmet I can wear it with room to spare! I am really happy! (The matte black color is cool and the contents are well made! View detail
Using Zenith:・・・・
Was the one you received as per Image?
It was exactly as shown in the Image and was well made.
I am not a cheap or bad person.
[How did you feel about the Fit?
I chose SizeFree, but it's not too large.
It can be used normally, it's just that it's only for city driving, PetitTwo should be considered as the way forward.
How was your experience with it?
The feel is good, it is light and the basic performance is TIGHTLY.
What are the specifications of the product?
Smoke Shield (sold separately) is used.
There are no other special functions, and it is Simple.
[Was there anything that disappointed you?
Nothing in particular. Frankly, I feel better because I had no expectations at all.
How did it compare to other products?
No comparison.
It was purchased for 125?, so it was a cosmetic choice.
Since my Motorcycle is a Yamaha, I inevitably chose a Yamaha product.
I think the performance is sufficient for my needs, although the Fit feeling etc. is not bad,
Overall, it is loose, so it is not suitable for long distances. It is considered to be only for short distances.
I think it is necessary and sufficient.
View detail
It is a rare and rare big size half cap!
My head is Large size so I have a Big size Just a quick Scooter ride to Convenience. I was looking for a helmet for my son and purchased this one. The chinstrap is easy to put on and take off with the one-touch system. "Spit This is the perfect helmet for those who are looking for a half cap in a large size! View detail
Helmet with excellent cost performance
This is mainly a comparison with OGK's Camry III, which I have been using, but I think it is a suitable comparison since it is a Helmet in the same price range.
First of all, the Forme is very similar, but the G-Force is a little longer front to back. The G-Force looks a little larger than the G-Force, which may be due to the color.
As for the weight, I don't have a scale that can accurately measure it, so I hold it, but the G-Force feels a little lighter than the G-Force. When covered, the difference is not felt.
As for the fit, I think the G-Force is a little stronger against the Cheek pad and forehead, but I did not feel any pain anywhere even after wearing it all day. Both have GlassesSlit, but while the Glasses wobbled in the Camii III, the Glasses are stable and do not move in the G-Force. The entire interior can of course be removed and washed.
The chinstrap is a MicroRatchet, so the usability is the same, but the G-Force has a ring that hooks onto the helmet holder too close to the helmet, making it difficult to fasten it to the holder.
The G-Force speaker holes are pocket-shaped, so there is no need to fix them with Magic tape or double-sided tape. Wind Cutting sound is a bit louder than the Camii III, but the Speaker is closer to the ear, so the sound from the Speaker can be heard rather well.
Ventilation is the same level as Cam III, and it can ventilate to a certain extent.
Shield is standard as Light smoke (very light color), and Option [Color] There does not appear to be a Clear setting. When you register your product, you get an anti-fog Seat called Fog WINPlus, but even without it, it is hard to fog up because of the large space around the mouth and the distance to the Shield.
The Inner Visor covers almost the entire field of vision, and the lower edge of the Visor does not interfere with the field of vision. You can take the Visor in and out without any problem with the Gloves on.
I think Cam iii is also very cosmetic, but G-Force is even more cosmetic because you get an anti-fog Seat and it also comes with a Chin curtain, NeckShutter, Breath guard, and a muffled Ear Padetc. for when you don't use the Speaker! The overall build quality is also very good, especially the cheapness. The overall construction doesn't feel particularly cheap, and I get the feeling that a lot of attention has been paid to the details.
View detail
Generally looks good, but a little distressed.
Fitting is perfect. It installs without any problems and looks kind of beautiful.
Blackness is equivalent to Semi-smoke, not Light smoke by ARAIHelmet standards. The face is almost invisible from the outside. It is good during the daytime and visibility is good. [Color] Clear and calm driving.
However, in the tunnel or after sunset, although it is not dangerously invisible like ARAI's Dark Smoke, it is often difficult to see, and one unconsciously raises the Shield.
View detail