Reviews
Fits: YAMAHA R100 ROADSTER, YAMAHA MAJESTY, YAMAHA GRAND MAJESTY, YAMAHA TMAX, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman, KAWASAKI VULCAN DRIFTER, KAWASAKI Epsilon, KAWASAKI ZZ-R1200, KAWASAKI ZZ-R1100, HONDA VALKYRIE, HONDA FUSION, HONDA FORZA, HONDA FORESIGHT, HONDA Silver wing
It is thin in every way!
The material was not like this manufacturer's, made of Chinese PelePera, and it was not durable enough for summer use, perhaps due to weak UV rays, and was in a chattering state. I reinforced it with tape several times a week and it was in a wartime-like state! I was hoping it would last a year. View detail
Broken before I could use it.
Before using it, I threw it away because the lock hole 1 was licked and unusable. Because it is an impossible product. View detail
Cheap for an expensive product
First of all, the paint is inferior. How is it possible to ship the product as it is after it has been involved in a lot of Garbage?
Since the paint is in such a state, we can expect that the base coat is also not appropriate and that the rust inhibitor will not be effective even though the product will be used for a long period of time.
The Rope hook is also unnecessary for the Mushroom umbrella. The Tie Down Belt loop cannot be hooked because of this.
The fact that the door can not be in the collapsed position is another lack of ingenuity in the design. If you open it vigorously without knowing it, you will be crushed by the protrusion from the body of the truck. If you do not load multiple vehicles, I do not think it is necessary to replace the door frame (it would be easier to use as a Truck).
View detail
It's the worst
It is listed as Z1000 air cooled, but it was for a water cooled z1000. The description is incorrect. I have sent numerous emails to point out the error and return the product, but they have completely ignored me. They claim to offer a warranty for the model of the car, but even though they themselves are in error, they offer no warranty and cannot even be contacted. This company is a scam. Please be very careful. Rumor has it that they also sell counterfeit parts. View detail
Camera abnormality immediately after opening the package.
After opening the package, I connected the battery and checked the operation, but the Camera error message kept blinking and I could not record. View detail
It's broken
Broke soon after purchase.
I'm sorry it was so expensive.
View detail
Double-sided tape is peeling off,
Double-sided tape peeled off due to the weight of the IncomeBody for a long period of time, and the IncomeBody needed countermeasures against falling. View detail
at one time
It seems that the side that sticks to the tank is not oil-resistant, and it melted and made the tank sticky. I am sorry, but I want to throw it away. View detail
Fits: YAMAHA YZF-R25, SUZUKI Hayabusa, SUZUKI GSX-S750, SUZUKI SV650X, SUZUKI Gixxer 250, SUZUKI V-STROM250, KAWASAKI Z900RS, KAWASAKI ZX-10RR, KAWASAKI Z650, KAWASAKI Ninja250, KAWASAKI W800, YAMAHA YZF-R3, YAMAHA Tenere700, YAMAHA XSR700, YAMAHA SR400, YAMAHA TRACER900, HONDA rebel1100, HONDA VFR800F, HONDA CB1100, HONDA CRF250 RALLY
Smallish
I bought it for my 2nd model GSX1300R HAYABUSA because it was OK, but I used it on my 3rd model GSX1300R HAYABUSA and it would have been a just fit if it was just a little longer. I would like to use it on other Motorcycle's Inner. View detail
Fits: TRIUMPH Bonneville T100, TRIUMPH Bonneville T120, TRIUMPH Bonneville T120 Black
It broke after one year of use.
I installed it in TriumphBONNEVILLE or Quantity of the support after one year of installation.:Pair (for Left and Right) Both were broken. View detail
Fits: YAMAHA CYGNUS Gryphus, YAMAHA MT03, YAMAHA MT-25, YAMAHA MT-03 (2015-)
It is inconvenient for this MODEL
As a product, it is a good one as it is OEM.
However, the operability is very poor.
AutoQuantity after 60 seconds of turning off Engine:Set.
Vibrations caused by opening and closing the rear box or opening and closing the helmet in will set off a large volume alarm.
Of course, it also rings by hand after the Engine is turned off.
To avoid this, the alarm must be stopped each time the engine is turned off, and the alarm must be started again just before leaving the vehicle after getting ready.
A Large volume confirmation tone sounds momentarily each time a stop or start operation is performed.
I heard that Base is easy to use in another model (A321 or A325) with the same MODEL and REMOTE CONTROLLER operation, but this BasicA322 is as described above.
It would have been very easy to use if the alarm was linked to Handlebar Lock and turned on/off.
It was so depressing that I had to remove it.
View detail
Only the Right Side cannot be installed.
The work itself is so easy that anyone with the proper tools can install it.
It is very Firmly in strength and seems to be fine.
However, the Left Side was easily installed while the Right Side was not.
On the Right Side, the mounting holes are not aligned with the vehicle body and the screws are not inserted at an angle even when they are loose.
Therefore, it can only be fixed with a single Screw.
Customer Support was available to help,
I was sent a replacement, but (Delivery time:one month)
I still couldn't install it as well...
I feel that Bracket is in the wrong design stage if it doesn't get it twice in a row.
Or a welder's error.
Some people seem to be able to install it, so I wonder if the individual difference is Large.
The product is good, so it would be 5 if only it could be installed.
I am not disappointed because the Gold amount is also quite high.
Buyers need to be prepared for this.
I use a Screw and Tie Band to hold it in place for now. (Eventually, welding and processing are planned.)
The agency was sincere and I was satisfied with that.
However, even if I switch to other Motorcycle, I don't think I will buy this Manufacturer's products from Net in the future.
View detail
Installation is limited to vehicles.
We had intended to install this around the handlebar of a Harley/XL1200C SPORTSTER 1200. However, we gave up the idea of installing it in a position where the dial is visible directly in front of the rider, considering that it might fall off due to heat or vibration. I think it is suitable for vehicles with the dial facing straight up and with little vibration. It is well made and heavy. It would be a shame if it fell into the fuel tank. I will use it on a car without a clock! View detail
Fits: HONDA SPACY100, HONDA SPACY125, HONDA LEAD110, HONDA LEAD50, SUZUKI ADDRESS V100, SUZUKI ADDRESSV125, Vespa PESPA 125, YAMAHA AXIS 90, YAMAHA CYGNUS 125, YAMAHA CYGNUS 125SR, YAMAHA CYGNUS 125X
Short life
I purchased it in February 2023 and it tore around the middle in September.
There were other tears. Maybe a little too early.
At any rate, I had Aluminum Tape, so I Repaired it.
View detail
A bit sorry
I tried to install a RAM Mount with this on a 12mm diameter bar.
When I tried to apply it, it was 13mm, so it was loose and turned.
I tried shaving the gap to accommodate 12mm, but no matter how much I tightened it, it still slipped and rotated and could not be fixed.
I tried to put double-sided tape on the Pipe to hold it in place, but the entire Tape kept spinning.
I gave up at this point. I'll think of another use for it; I wish the inside of the Spacer was a soft Material.
View detail
Fits: YAMAHA SR, HONDA CUB, HONDA CT110 HUNTER CUB, HONDA REBEL, HONDA CB750F, KAWASAKI Z900RS, Others
I want it to be equipped with a chitinous Buckle.
The FakeBuckle is easily detached while running. Side flap opens outward. View detail
Fits: YAMAHA WR250X, YAMAHA WR250R, YAMAHA XJR400RII, YAMAHA DIVERSION, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400S, YAMAHA XJ400ZE, YAMAHA XJR400, YAMAHA XJ400Z, YAMAHA XJ400ZS, YAMAHA XJ400D, YAMAHA XJ400S, YAMAHA XJ400, YAMAHA SR400, YAMAHA FZR400RR-SP, YAMAHA FZR400RR, YAMAHA FZR400, YAMAHA FZR400R, YAMAHA FZR400
DAYTONAMotorcycle Cover
It was weak in the rain and ripped right off ?Surprise! View detail
Fits: Others Universal, HONDA PCX, HONDA PCX160, HONDA LEAD50, HONDA LEAD 90, HONDA LEAD 100, HONDA LEAD110, HONDA LEAD125, HONDA Dio110, HONDA SPACY, HONDA CROSSCUB110, HONDA CT125CT110 HUNTER CUB, YAMAHA NMAX, YAMAHA NMAX155, YAMAHA CYGNUS X, YAMAHA CYGNUS Gryphus, YAMAHA Axis Treat, YAMAHA AxisZ, YAMAHA GEAR, YAMAHA BWS
CT125CT110 HUNTER CUB is small and overall questionable construction
First of all, it is difficult to determine if the product is defective.
I've used it so I guess I can't return it….
CT125CT110 HUNTER CUB with GIVI-E370 attached to the Rear Carrier.
The description is marked as corresponding.
The fabric is thinner than DAYTONA's, but I guess that's what you get for the price.
When I put it over the body of the car ….
Before and after Quantity:Pair (for Left and Right) Both are tight-fitting.
The Left Side is about 5 cm above the ground in a vertical position in the Center Stand.
Right Side is about 15 cm above the ground!
Quantity:Pair (for Left and Right) You can't fix it to get Balance.
This means that with Side Stand, the hem of the Right Side will go further up and there will be a lot of gaps.
Quantity:Pair (for Left and Right) You didn't make it the other way around?
Furthermore, on the front side, the position of the hole through which the Red-colored Chainetc. is threaded is not correct.
too far forward (Vertex) Chain cannot pass.
The tread surface of the tire, not the wheel, is to be drilled and threaded.
The back side has a hole in a normal position.
It's been a while since I grabbed a Large outlier….
Again, I can't decide if it is defective or such Spec.
Even if you could request a return and return it. It's normal." and I'm going to be charged for shipping and return to myself.
Huh, I guess I'll consult Webike if I can't….
View detail
Why OEMAttachment, Honda, get a grip!
Honda Genuine Accessories.Side boxBracket installation was the worst.
I had heard that a person who purchased the product at the same time had found the installation to be Large strange.
I didn't think it was this Large strange.
In the end, all three stop bolt holes were machined to length.
When we checked the position of each of the three pcs, we found that they were off by about 2mm to 3mm.
All three holes were to be machined at least 1mm long,
It is made so sturdy that my Hand power was not flexible enough.
It took me about 3 hours, and I was cutting long holes little by little, believing that it was OEM, but in the second half I was using Leutor to do the hard work.
Finally got around to installing it.
I was worried about the future as I have other OEMAttachment purchases.
View detail
Poorly made so it floats.
The bolt and double-sided tape are used to secure the bolt, but the double-sided tape peeled off quickly due to poor workmanship. View detail