Reviews
Waterproof property is not good
I bought this for Repair because the original Fender Eliminator License Plate Light was damaged. The light shines well and the visibility is good, but the waterproof property is not so good… Large rainfall causes water to get in… For now, I use it with Duct Tape wrapped around it, but I think it would be better to use it for a long time by coking etc. View detail
LED License Plate Lamp was broken.
[How is it used?
The LED License Plate Lamp that came with Active's Fender Eliminator Kit was cracked, so I replaced it.
License Plate LightSince the price is almost the same as the Single Body one, I bought this one.
Was the installation difficult?
If you can do wiring, it's easy, but if you don't have the tools, it's not so easy.
How was your experience with it?
The black resin on the outside of the License Plate Light is so thin that it easily cracks when tightened even a little too hard. It is too thin, so I wish they had made it a little thicker or made it from gold.
[Included Parts:were they on?
Sticker、with Clip
[Opinions and requests to Manufacturer
I don't understand why License Plate LightSingle Body and License Plate with Bracket are almost the same price.
View detail
License Plate Light Measures
Wiring is quite thin, so Quantity of Wiring to Gibbon terminals.:I plugged and crimped 2pcs. The brightness is just right for illuminating the License Plate. I think the durability is the only thing left to be considered. View detail
Illuminates cleanly and evenly
If you don't have License Plate Light, this is the only choice!
LED Tail lamps originally had a License Plate Light, but it was wiped out without our knowledge!
I was searching for a Webig to take measures against car inspections, and I found a wonderful product!
Prices are not as low as they could be, but someone is living off of this, so it can't be helped!
I am concerned about the durability, but it is a well-known manufacturer, so I guess it doesn't matter.
View detail
It can be easily put on anywhere!
[How is it used?
When I bought a new cbr600rr Fender, it did not have a License Plate Light, so I purchased this product which can be retrofitted.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It was easy, you can see the installation video on YouTubeChannel, so if you follow the instructions, you should be good to go.
I installed a conversion coupler for Honda, but the License Plate Light did not work, so I used the one that comes with the coupler and interrupts the wiring. The reason why it did not work was that the fuse was out. You can either modify the coupler or use the included coupler, both of which are easy to install.
It attaches to the back of the Number with Double-sided Tape, so it is very easy to put on. It is also strong enough.
How was your experience with it?
The LEDs are very bright and well lit, and the fact that they are compact and not very noticeable is great.
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
License Plate Light
I bought this product because I needed a License Plate Light for a small custom job, and I think it is easy to install, but I think it is easy to break if you bump it a little bit. View detail
Looks like it would fit in a Compact.
I haven't installed it yet…
The appearance was unobtrusive and as desired.
View detail
Small and shiny ones are good.
If there is such a Compact and Stylish one, I would buy it.
I made a bracket and attached it.
View detail
Although it attaches to GSR400 and one month passes, there is no trouble. Although brightness is also an outclassing and is large satisfaction functionally, when it attaches, if it sees from back since the mounting hole of a number and the head of the
Although it attaches to GSR400 and one month passes, there is no trouble.
Although brightness is also an outclassing and is large satisfaction functionally, when it attaches, if it sees from back since the mounting hole of a number and the head of the bonded part of a lamp are short, a power cord is short [ having used four stars ] in a part of stay interfering and becoming hard to see and shave the character of a number.
I am using it in the state where it inserted by Kami of the number attachment bolt without using the mounting hole.
View detail
Bracket must be self-made
Bracketetetc. If you can DIY, you can put it on without any problem.
I bought this product because the Fender Eliminator was also self-made.
I am satisfied with the brightness.
View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Touring , HARLEY-DAVIDSON Softail , HARLEY-DAVIDSON Dyna , HARLEY-DAVIDSON Sportster , HARLEY-DAVIDSON V-ROD
It's an anti-theft license plate light!
[How is it used?
I somehow added a position lamp to Blinker and Headlight, so I wanted one in the back as well. So I bought one for the back.
Was the one you received as per Image?
Yes
Was the installation difficult?
The handling of Wiring was Large strange.
How was your experience with it?
It is good at night with a faint glow, but during the day it is hard to tell.
Anti-theft effect cannot be expected because even though the front Nut is special, it is easy to loosen a regular Nut from the back.
[Included Parts:were they on?
Nut only
[Was there anything that disappointed you?
Wiring is longer than expected and gets in the way.
▼These are the Parts that cannot be Recommendation in terms of cost-effectiveness.
View detail
bright
I use it for a position lamp and it is much brighter than the NORMAL lamp.
The white color is very bright and cool, and since it is LED, I think it is very durable.
View detail
ACTIVE Active LED License Plate Lamp
It was installed on a Yamaha MT-07 in conjunction with Active's Fender Eliminator Kit.
I am satisfied with the slim shape of the product, which provides the necessary area but is not too conspicuous.
View detail
Well, I guess this is how it is.
I had replaced it with R&G's Fender Eliminator Kit as soon as I bought the new car, and the Tail Lamp in the Kit was a transparent Lens, so it illuminated the Number to a certain extent. I am ashamed to say that I have never noticed this because I don't drive at night very often. When it was time for inspection, I took the car to the shop and found that Kit's Tail Lamp did not contain a License Plate Light! It turned out to be a good thing. I had always assumed that it was embedded in the underside of the Tail Lamp. I could have returned it to OEM, but that would have been too much trouble. So I looked for a reasonable License Plate Light, and chose this product with License Plate Bracket due to the problem of securing space for installation. Since my car inspection was coming up, I had it shipped directly to a Motorcycle shop and they installed it immediately.:2pc. No Set light! Clearly insufficient light intensity. Requested immediate return and exchange and completed the exchange and installation the next day. This time, all 4 lights came on and the luminous intensity was sufficient. I was able to meet the scheduled vehicle inspection date with the limit.
The license plate bracket is the smallest necessary size and thickness. The License Plate LightBody also has good brightness, but the wiring comes out from the side, so it is impossible to keep it out of sight. I would not recommend it to those who are particular about the details of the appearance of the light.
I think it is a product that is appropriate for the price. If you want a clean and high quality custom look, you should choose another product, even if it is more expensive.
View detail
This is a replacement for the Fender Eliminator Number made by DAYTONA.
I thought LEDs would never break, but the one from DAYTONA's Fender Eliminator broke in less than a year. DAYTONA's for Repair is expensive and the life span is too short, so I decided to try the KOSO one.
The screw pitch was slightly different, but the koso one has a thinner bolt, so I was able to install it. I was not expecting the warm color of the LED, but it is well made and looks promising. The nut is very small and 5.5mm, so it is better to check the tool for installation.
However, it would be helpful if this kind of thing was a little cheaper.
View detail
I wonder if it will pass inspection.
I think the brightness and diffusion are good.
However, the brightness was uneven and the light did not reach the bottom of the Right and Left.
You won't know if your car will pass inspection until you actually take it in for inspection…
The photo is just for reference, but it's hard to tell because I'm irradiating a black board.
View detail
Nice and bright
Hurricane have an excellent LED license plate light available right here. I have been using it for a few years now and the light produced from the five LEDs is perfect and matches the rest of the LED lighting on my Honda Monkey 125. Installation is very simple, all you need it a clean flat surface and the double sided tape on the back of the LED light does the rest, I was originally concerned the double sided tape would not last but has shown no signs of deteriorating out in the weather. Pricing looks to be fair for a LED light of this quality. View detail
very satisfied very very very
The light is quite bright.
The product is also of good quality and I am very satisfied.
It is very good when used together with TST fan-less products.
The TST product itself is very easy to use and feels like something delicately made.
very satisfied haha
Hahaha
haha
Hahaha ------------------------------------------------- --------- The light is quite bright.
The product is of good quality and I am very satisfied.
It is very good to use it together with the TST fenderless product.
The TST product itself is very easy to use and there is something delicate about it. The feeling of being made
very satisfied
View detail
I like the shape.
If the license bolt is attached as it is, there is a high probability that it will be an eyesore to the following vehicle.
I was looking for something with the LEDs as deep as possible and this is what I found.
Compared with the one that only the slit is in for the conventional LED, the mouth is also opened like large, and the light emitting part is also in the back, and it seems to be good for the measures against blinding...
But there is no WaterproofSeal at all on the LED part.
The seal is just a transparent silicon, so you can just remove it and seal it with Epoxy resin.
View detail
I didn't embed it.
It has an unexpectedly large amount of light and is compact.
The installation method is up to Ideas.
I don't ride in the rain, so I'm not sure about the waterproofing.
View detail