Reviews
Simple solution to a dirty problem.
After one moto, my radiator fins were starting to get folded over. I ordered these after reading some great reviews, I wouldn't want to ride without them after having them on now for 4 months. No more dirt clogging the radiators and clean up so easy. Installation on stock louvers was a piece of case using simple zipties to attach. On polisport louvers they just plug in. Much better looking than the twinair ones in my opinion, HIGHLY recommend View detail
easy peasy
The MD44 headlight cowl is a personal taste, but many people seem to be dissatisfied with it. This product is great, the light part can be used for the OEM headlight, and if you change to the LED bulbs that are sold in the market, the brightness is excellent and you can use it without any problem. It is also much easier to install than the OEM Headlight. It is also lightweight, and the effect is outstanding for people who go into the mountains. It is also recommended for street riders as it changes the look of the car. View detail
Fits: HUSQVARNA FX350, HUSQVARNA FE300, HUSQVARNA FE250, HUSQVARNA FC300, HUSQVARNA FC250, KTM 350XCF-W, KTM 350SX-F, KTM 350XC-F, KTM 350EXC-F, KTM 250XCF-W, KTM 250EXC-F, KTM 250SX-F, KTM 250XC-F
Sufficient protection for Clutch cover
To install, simply remove the 3 screws from the clutch cover and put it on the outside.
No oil or Gasket replacement is required.
It will be a little thicker, but once you get used to it, the overhang will not be uncomfortable.
I think it has given me more peace of mind since the goal is to control scraping and scratching by Boots and stones.
View detail
Fits: KTM 350EXC-F, KTM 350XCF-W, KTM 250EXC-F, KTM 250XCF-W
just in case
I don't mean to go to the gully, but you never know what might happen on the off-road. If the clutch cover is broken, it is impossible to drive on your own, and an engine with debris in it is unreliable, so you will have to have a lower back OH.
It is a small price to pay for a change if you pay 10,000 to get rid of anxiety.
The SIXDAYS Frame is Orange, so the colors match and Parenthesis is good.
I think Bolt is a bit chintzy, so I will replace it when I feel like it.
Installation is easy since the bolt is on, but a torque wrench is required to loosen the engine bolt.
View detail
Quality is good
Used in 2016 YZ250F.
New new for 2023.
This is my second purchase.
This time it was on Sale for 12970 yen.
It is attractive to be able to get them at this price compared to OEMs.
However, the delivery time took about two months due to the current situation.
If Fork Guard Plastic is also included, full marks.
EachPart is individually packaged.
I stuck Decal on it as soon as it arrived... ♪
View detail
Repair parts were available for purchase!
I had given up on it because it was an overseas product, but I happened to be looking at it and found it and ordered it immediately. View detail
Fits: BETA RR125 2T, BETA RR390 4T, BETA RR300 2T, BETA RR350 4T, BETA RR200 2T, BETA RR250 2T, BETA RR430 4T, BETA RR480 4T, BETA X-TRAINER250, BETA X-TRAINER300
Is it all like this?
Why is it so crooked when new?
Are you licking your chops?
Even if it's made in a foreign country, it's too much.
Wonder if all of WeBig's inventory is this crooked.
Do you not inspect the product?
View detail
Installed on TT-R125LWE!
We chose this product because of its size, color, and comfortable design. View detail
Installed on TT-R125LWE!
Lightweight type with Tail, Brake, and License Plate Light.
We have selected this product.
View detail
Fits: Others
Easy to install! Cost-effective!
I was looking for an all plastic hand guard like the ACERBIS BirdFit and found this product from Poly sports.
Reasonable and recommended compared to Zita.
KX85 is light and does not need to be made of Gold genus, but it will be in Enduro, so it will be Large sturdy if you can protect your hands and Lever to some extent.
I haven't used it yet so I don't know how durable it is…
[How is it used? Used in KX85.
Was the one you received as per Image? As per Image.
Was the installation difficult? It is very easy.
Point and hang of installation The Clutch Side can be easily installed as it is, but the Brake Side is not as shown in the photo because the MASTER and Hose are in the way.
Cut and installed.
How was your experience with it? It has not been used, but I believe it is like ACERBIS BirdFit.
[Included Parts:were they on? Comes with mounting kit.
[Was there anything that disappointed you? None in particular.
[Availability and clarity of the Instruction Manual Instruction Manual is included but only in Illustration.
View detail
Fits: Others
Processing is required, but it's cheap, so it's good!
I was looking for a cheap hand guard that is not Solidly's CloseHand guard, and I found this one.
Parenthesis is ◎! Off car for cosmetics for the price, it deepens the taste of the car.
As for durability "It cracks easily." However, it is good if the handlebar can be made to tilt while at the same time serving as a bush guard at least.
The mounting holes on the One Side are incredibly gapped, and I couldn't help but think that they are cheap and accurate, but that's okay because they are cheap.
View detail
Easy to attach and detach, good product, but may be too robust for TRIALfor Vehicle
[How is it used? For installation of safety parts for TRIAL vehicles (I was expecting TLR200 OEM Product equivalent, although this may not be what was envisioned in the design.)
Was the one you received as per Image? Understanding that Enduro for Vehicle is a robust product when it arrives. (too robust:not Minus).
Was the installation difficult? No problem (Easy and very good as expected, although some ingenuity is required since it is outside OEM use.)
How was your experience with it? No problem (as expected, installation requires some ingenuity, so installation and actual use will be determined in the future).
[Included Parts:were they on? No problem (since it is originally a Single Item).
[Was there anything that disappointed you? too robust (Not Minus)
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fender, full of Wound, was replaced with this one.
The OEM Front Fender is over 10,000 yen, so I decided to go with the less expensive polisport Universal Product. The quality of the product is better than Large.
Surprisingly, it could be installed without any modification. 1cm spacer was inserted in the 4 screws to complete the installation.
SEROW Hook and Quantity to Fender extending from Headlight cover:I have 2pc's plugged in, but there seems to be some interference.
I did not process it because it was not a concern.
The front length is a little shorter, but the rear frame side is not a buttstock of the OEM, so it looks more like a parenthesis.
View detail
Worth the money!
+ Very useful product, I use it every time I tie down the bike. Does as intended and does not add that extra compression to you forks.Feel a lot more comfortable knowing that my forks aren't under a lot of load while being transported. I also have no problems leaving it up on the truck overnight now. It is plastic an I am not sure how long it will last but it is worth the purchase. - Barely had to compress suspension for straps to go tight. Tightened until the tire just started to compress a little Bike did not wobble or move around during drive to track Only thing nicer would have been if it attached to the forks like the ones KTM and Husqvarna provide but those are bike specific and this one is generic. so no complaints View detail
good-looking
It's a bit expensive and hesitant because of the low price point of the original Cover, but it's cool and solidly built that seems to Guard properly.
It is necessary to remove the Shift Pedal once, but it is easy because it is simply attached on top of the original Cover with three Bolts.
I have a my23yz125x and it arrived with no problems.
View detail
Looks sturdy.
It is surprisingly thick and sturdy. I bought it because I was advised to guard this side of the cover because if the cover cracks, it will be impossible to drive.
There is some interference with the spring of the Brake pedal, but it does not seem to be a problem.
The label only says up to my21, but it attached to 23yz125x with no problem.
View detail
The look was to my liking.
I like the way it looks, but the bulbs are EURO bulbs, so the number of bulbs that can be changed to LEDs is very limited.
In addition, the Headlight terminal is a Hira terminal, so the Wiring and terminal must be provided, and since there is no Cutline, it may not be possible to drive on public roads.
View detail
Fits: KTM 450 SX-F, KTM 450 XC-F, KTM 250 SX, KTM 250 EXC-F, KTM 250 EXC, KTM 200 EXC, KTM 150 XC, KTM 150 SX, KTM 125 SX, KTM 125 EXC, KTM 350 XC-F, KTM 350 SX-F, KTM 350 EXC-F, KTM 300 XC, KTM 300 EXC, KTM 250 XC-F, KTM 250 SX-F, KTM 250 XC, KTM 500 EXC-F, KTM 450 EXC-F
I have no problem installing it.
I installed it on a '21 250exc and there was a small gap between the air cleaner box and the outlet for drainage and Garbage.
I repaired it with Tape because I didn't want the water to come up to the Air cleaner when I wash my car.
It is functioning as a mud guard from the original Rear tire.
Good for Orange lovers as long as you don't mind a few gaps. (^^)
View detail
Fits: YAMAHA YZ450F, YAMAHA YZ250F
Cheap and reliable
I purchased this as a practice exterior.
It is a good product with excellent cost performance.
OEM at the same price, Quantity:Pair (for Left and Right) You can only buy about Number Seal Cowl.
View detail
License with Lights, plenty of brightness!
I was looking for a product of this type with a License Plate Light.
The LEDs are bright enough.
View detail