Reviews
Fits: KTM XC, KTM XC-W, KTM XCF-W, HUSQVARNA fe, HUSQVARNA FC, HUSABERG fe, HUSABERG TE, HUSQVARNA TC, HUSQVARNA TE, KTM EXC, KTM EXC-F, KTM SXF, KTM SX, KTM XC-F
The price is cheap
If it is Disk guard of other manufacturers, the dedicated Bracket is needed separately, and the price is not so bad It's a good idea to install the disk guard on the BottomFork Protector In this case, I installed the disk guard on BottomFork Protector Because of the cheap price, it is not so easy to make, but I could install it without any problem However, there is a place where the collar is short I thought I may have misapplied the color, but it's not so
View detail
Fits: KTM EXC 125, KTM EXC 200, KTM SX 125, KTM SX 200, KTM XC 125, KTM XC 200, KTM XC-W 125, KTM XC-W 200
Satisfied
The RearBrake pedal seems to hit the Clutch cover in the fall I found this product when I was looking for it Now I can attack with confidence View detail
Frankly
It's mostly plastic, but it's better than nothing and cosmetically better than nothing. I fell over once Lever broke at times, but maybe it just happened to be a bad spot to hit View detail
Fits: KTM XC-FW 350, KTM XC-FW 250, KTM Freeride 250F, KTM EXC-F 350, KTM EXC-F 250, HUSQVARNA FE 350, HUSQVARNA FE 250
1
It was a totally different color and shape!
It was a hassle, so I bought it back from a different place
Ladies and gentlemen, please be careful!
I have installed it and would like it returned and returned Gold
View detail
Fits: SUZUKI RM 125, SUZUKI RM 250
Cool
It's great to see the old Motocrosser become the latest Trend design But the Front Fender interferes with the Frame (see photo 2) and the Bracket It looks like a design error (photo 3), could you send me a non interfering bracket? View detail
governor's accuracy
Accuracy is government
I'm going to remove the new exterior and install this one, but
Shroud floats from the tank, and the side number is flexed and attached by arm strength
I'm satisfied with the fact that I can get there and it's inexpensive and I'm a big fan of Large
View detail
Good for color change
The exterior is now available in POLISPORT products
It's completely unnecessary if you don't care about the color
The OEMGuard was damaged and replaced
Prices are higher than OEMs
Other Radiator Shrouds have screw holes that are too large or
The dimensions are a bit sensitive, but it's a small part and
Screw hole dimensions and large size are exactly the same as OEM
View detail
It was different from the image
I should have checked the images and text carefully and inquired about it
The picture has 14 bellows, while the text says 28, and the one I received was the one in the text It was one of 28 things
I assumed that I would receive the image as it was, so I didn't pay attention to the text … I I think I should change the image to the correct one, although I made a mistake in confirming that I did
View detail
Unnecessary
KTM 250EXC-F (sixdays 2017 MODEL) Attached to
I wanted to put Decal on the Swing Arm and I wanted it to be Black
Double-sided tape and Tie Wrap on the inside to attach to the Swing Arm The Tie Wrap will break, depending on the run
A MOTARD dress-up would be fine, but not for running the BALIBALIOff-road I wondered if I didn't need it
There's also mud between the Cover and Swing Arm, and the Tie Wrap has to be looked at often It's also a bit expensive
It's your choice...sort of
View detail
Elastic band's fixed pin is too fragile
I bought it for the price, but the elastic band attachment part was broken immediately
I mean, it's built in such a way that when you put it on for the first time, you can take it off
I am thankful that Poly sports products are inexpensive in general, but there are some disappointing quality products here and there There is
Well, is it brazen to ask for something cheap and close in quality to other pricier items (^^;
View detail
Good for color change
The shape and texture are almost the same as the OEMs
However, when it comes to installation, it's not very accurate and you have to pull to fit the screw holes
Thanks to this, though, there is no tension-induced rigidity after installation
And put the Gold genus color between the screw hole and screw
(This is OEM, the color Gold is welded to the resin of Fork GuardBody So this area is different
The screw holes may be damaged if you install it in a haphazard manner, but since it is a part to be removed frequently, it is a good idea to take it off frequently
If you're not interested in color-changing, I would recommend OEM, although OEM is a bit more expensive
View detail
If attaching importance to appearance the best is Cool!
OEM's Headlight cowl is not bad either, but when compared with WR 250 or a little, is it a bit strange? Design is not good?
Or rather, I do not want Number Seal to be somewhat disgusting, although I put a homemade Cutting sheet, it is extremely unpopular (Tears) So, I wanted to do ime Chain, I bought this Headlight cowl that I had been worried about before now.
Although the color is Yamaha blue ... I do not mind, though Plate is originally White, the colors of Number Seal and Cowl are reversed, which is a bit frustrating.
..., so it's hard to install as it is.
LANZA Halogen bulb of H4 (Sankei Socket) Anyway, this Headlight is Straight's 4PinConnector, and the power side must also change it.
In my case, thinking to restore, I replaced Headlight's Connector with Universal's Triple Socket.
At that time, the Wiring of Low beam and High beam was reversed, and I reconnected again (T д T)
Instruction Manual I am wrong ... Well, within the range of expectations.
There is no problem if it is bright on electricity, but just to be sure, I think that it was better to have a service manual.
The installation of Cowl has two kinds of Bracket (Two of the short depth and the long type) Since it is attached, it is possible to install in the model of Large general, but Bracket's material is not good (The quality of Plastic Material is subtle) So, in the long run it may be better to switch to a Bracket that Yamaha OEM is likely to meet.
If you are familiar, you can install it in about an hour.
Well, although it looks like it's important, I felt relieved when the old deco light cowl was replaced, it became really cool.
If you are not familiar with Motorcycle, you may misunderstand that it was attached from the beginning (← too much?).
Although it is the light intensity of Headlight, I think that it is no problem unless running like a beast road at night.
However, the absolute amount of light is lower than that of H4's Highly Efficient Halogen Bulb.
If you want brightness, we recommend purchasing Halogen bulbType Headlight cowl from the same Manufacturer.
If you want to image Sharp looks, or if you think that you want to change OEM's Cowl, I thought that it would not be a problem if I purchased it.
View detail
For expensive reasons - - -
I thought that it would be nice to fold and bought it. When it is in the shortest state, it sounds like "Scarlet is off" as "Karakara". I do not hear a sound when I'm in Lift up state. The working part seems to be moving, but I was a little worried. Lever's hard to lock. It is not about as much as I had expected for the price, the evaluation is three stars. Well - - - I bought it, so I think I will use it for a long time. View detail
Fits: HONDA CRF450R, HONDA CRF250R
Cospa enough!
I bought for Race to change a bit of Image. I think that it is cheap because it was the price with all exterior. Regarding the accuracy of the installation, I thought that it is somewhat better, but since it is a resin, it has been mounted without problems with Large.
I bought Black, but I think that it was better if the color was more black.
View detail
Cospa is good!
Mounting on CRF 250 M. NORMAL's Large Kana Fender searched for MOTARD-like Small things, Design was good, Poly sports's cheap Gold price Yubasal Front fender - Purchase SMLine.
In the attachment to the CRF, because it does not fit the mounting holes of de Fault, needs to be modified.
Also, in order to prevent the rear end of the Fender and the Down tube of the Frame from interfering with each other, processing of the mounting hole was trial and errored. Although it took quite a while with unfamiliar work, I managed to install it somehow.
I am satisfied with Silhouette which I refreshed very much compared with Normal fender.
However, the texture is suitable for the price, sometimes the material is so soft that it gets scratched with a slight contact.
(Well, there is no problem if you consider it to be lightweight)
View detail
This is for Inverted Front Fork
I bought a Universal Product because the Light Belt of the Husk SM450R has expired but it was a for Inverted Front Fork.
Because there is no choice, I forced to stretch it and installed it but it would be a matter of time.
If Universal Product you would like the notation of φ size to be installed.
View detail
It is different from the photo
Purchase the cheapest one to divert to another car.
Product photograph seems to be the representative photograph, the shape is quite different.
Specifically, there are triangular large projections in the part under the Headlight of Center.
It is very good-looking but since it is diverted this part could interfere and could not be installed.
Since the quality is good, it seems that there is no problem for those who exchange OEM.
View detail
Open end's Hand guard
It's Hand guard of Open end!
You can change the position of the Guard variously!
Bracket is Material : Plastic I am worried that I will break if I crash.
Even if it breaks, Spare parts are on sale so if you buy it you will heal!
View detail
Fits: Others
For klx 125
Because it looks like for Full Size, OEMHandlebar has height and there are few places to install and Cableetc. It is difficult to install with interference of. I think that it is better to purchase Handlebar on the premise of replacement. Parts that extend the upper part of the Hand guard can be easily removed, but since there is a high possibility that it will come off during driving, Boltetc. We recommend fixing it with.
Looks also Parenthesis I think that it is easy to pick up because it is cheaper than the Hand attribute of Gold attribute and you can Arrangement by putting a Sticker well.
View detail