Reviews
Fits: Others
It's cheap, light, and straightforward to take on
I have never installed the Hand guard, and I have never used the Hand guard of Aluminum or I was worried that the Hand guard with a core would be more durable and last longer, but I didn't want it to be heavy And Material:If it is Hand guard etc. of Aluminum, there is no way to install the Grip end part But I can't install it to the Handlebar, so I choose this one
As a result, this was the right choice for me It's light, easy to install, and the Grip end part is made of Material:Because of the Plastic, it bent straight and installed beautifully
The durability is also stronger than I thought it would be, although I've already beaten it a few times with the Enduro
However, the construction of the included Aluminum Collar and Screwetc. is cheap If this gets better, there is nothing to say
But I bought two more afterwards because they were so much better than I expected
View detail
Fits: GASGAS EC 200, GASGAS EC 125, GASGAS EC-E 450, GASGAS EC-E 300, GASGAS EC-E 250, GASGAS EC-E 200, GASGAS EC-E 125, GASGAS EC 450, GASGAS EC 300, GASGAS EC 250
It arrived about 20 days ahead of schedule It was more solid than I expected
I was worried about the fit, but I was relieved to find that it fit perfectly, until now, I've been using Decal for the year I could tell, and the design was old and puffy I wish I had replaced the exterior of the car earlier It's so beautiful and shiny View detail
Expected
I bought it to divert it to the D Tracker
8-10φs drilling and 10mm spacer is needed for installation But even that [Color] It is relatively easy to change the look and feel of the game by Clear
On the D Tracker, the clearance with the Tire is narrow and installs without interference You need
If you have a Front120 wide Tire installed, this is not limited to this product, KX250 When I installed the FFork Guard, I felt that it interfered with the Tire It was
View detail
Good for color change
The shape and texture are almost the same as the OEMs
However, when it comes to installation, it's not very accurate and you have to pull to fit the screw holes
Thanks to this, though, there is no tension-induced rigidity after installation
And put the Gold genus color between the screw hole and screw
(This is OEM, the color Gold is welded to the resin of Fork GuardBody So this area is different
The screw holes may be damaged if you install it in a haphazard manner, but since it is a part to be removed frequently, it is a good idea to take it off frequently
If you're not interested in color-changing, I would recommend OEM, although OEM is a bit more expensive
View detail
Fits: YAMAHA YZ 450F, YAMAHA WRF 450, YAMAHA YZ 250F
It's a thing to look at, but it's the best cosmetic
The resin-based Chain Slider is a useful part for hard woods and Enduro It is
The chain line often shifts in the case of iron, and the chain line is often bent; Material:Plastic can be used for a long time because it will not be deformed by grinding
Poly sports is much more cost effective than other manufacturers High performance, good fitting, no inferiority in terms of performance, and no damage to the product when it is damaged You can also get Aftermarket parts from Aftermarket parts at a discount
But ZETA has also finally released a resin guard The price is about the same etc., but in terms of looks, the ZETA made one gets the nod I'll probably buy the ZETA one next time I buy one
View detail
Fits: YAMAHA YZ 125, YAMAHA YZ 250, YAMAHA YZ 450F, YAMAHA YZ 250F, YAMAHA YZ 250FX
I love it
Installed in SEROW225we
I bought it to make it into Number Plate
Large size and style is perfect for YZ
I like it myself
The installation is an in-hemp palmac from Universal Items
View detail
We're saved!
I used it on HardEnduro I installed it in order to prevent Wound because there is a gully
When I used it and looked at it after washing the car, I found a gutted Wound in the Guard, so this Parts helped me
View detail
Other than OEM Knuckle guard
I installed it in DL 1000 V-STROM 650.
Knuckle guard is on sale from SEA BASS with OEMOption, but Design seemed to be unbearable, so purchase Poly sports' Knuckle guard that was also attached to TDM 900 before..
Since it's a big deal, Choose Suzuki yellow according to Body color. I thought it was a bit flashy, but it is a good feeling.
Since the Body has some flexibility in the installation, I installed it while adjusting it well. Because the Clutch lever slightly interfered, I shifted the position of the Holder to the center side by 5?.
As Demerit, when installing this Knuckle guard, the OEM's Handlebar weight needs to be removed. Nonetheless, even if you remove Bar Weight, you can run without any problems.
I have been waiting for a while because the ordering period since ordering is long.
View detail
SEROW 250 became Parenthesis better
When it is SEROW of Small diameter round eye light, ime Chain effect is high
Compared with SEROW's OEMLight, it is half the weight in feeling
Even if there is a Stack Bar, there are no things that can not be installed but the person who removed it is good Fitting
When removing the Stack Bar M6 Nut and 20 mm Washer are required for additional to fix Meter
Low beam distribution is Cutline sweet
Please note that light quantity and light distribution are not better than OEM
Safety parts for ensuring visibility, not as lighting
View detail
Sturdy and Compact
It is tough and compact.
We purchased for TRIAL car, but it is a bit of a trick to TRIAL cars.
But folding is Compact.
Although it is high, I think that it is a good product.
View detail
Dissatisfied
I am on a dTRACKER.
I bought it because it was cheap at Sale, but it looks like Large texture, and if I lift it up I will not even get my feet even on my hands. It is very inconvenient..
I can not lift with a force that is half-baked.
View detail
Fits: KTM XC-W, KTM XCF-W, HUSABERG TE, HUSQVARNA FC, HUSABERG fe, HUSQVARNA TE, HUSQVARNA TC, HUSQVARNA fe, KTM EXC-F, KTM EXC, KTM XC, KTM SX, KTM SXF, KTM XC-F
Used for '08 250 EXC-F
I never touched PowerParts, but I think that it is quite good product here. At this price Fork bottomGuard (Both Sides) There is a sense of affinity with. There is no problem with the color tone of KTMOrange (Although it is matt finish). However, in order to co-stop the Guard, there was a sense of enthusiasm about the exchange of Axle clamp Bolt and Caliper bolt with Long bolt bundled. It seems that it is necessary to mark and periodically confirm loose confirmation. Also, you need to remove Disk guard to adjust Damper. View detail
Fits: BETA RR350 4T, BETA RR300 2T, BETA RR250 2T, BETA RR125 2T, BETA RR480 4T, BETA RR430 4T, BETA RR390 4T, BETA RR200 2T, BETA X-TRAINER250, BETA X-TRAINER300
Bad product precision
This time for the first time I bought a poly sports product, but I took it out of the bag, firstly the product is thin compared to the OEM!
Right Side is attached Screw hole accuracy is poor, it can not attach to Smooth, it is warped.
Left Side has good accuracy but Screw of Brake hose clamp has been licking from the beginning! Moreover, since Screw protrudes to the Reverse side, processing is necessary.
Since it is an overseas product, I can endure somewhat of the installation accuracy etc, but this evaluation is because Brake hose clampScrew is not allowed to lick from the beginning. I will not buy anymore, I can not recommend it!
View detail
If attaching importance to appearance the best is Cool!
OEM's Headlight cowl is not bad either, but when compared with WR 250 or a little, is it a bit strange? Design is not good?
Or rather, I do not want Number Seal to be somewhat disgusting, although I put a homemade Cutting sheet, it is extremely unpopular (Tears) So, I wanted to do ime Chain, I bought this Headlight cowl that I had been worried about before now.
Although the color is Yamaha blue ... I do not mind, though Plate is originally White, the colors of Number Seal and Cowl are reversed, which is a bit frustrating.
..., so it's hard to install as it is.
LANZA Halogen bulb of H4 (Sankei Socket) Anyway, this Headlight is Straight's 4PinConnector, and the power side must also change it.
In my case, thinking to restore, I replaced Headlight's Connector with Universal's Triple Socket.
At that time, the Wiring of Low beam and High beam was reversed, and I reconnected again (T д T)
Instruction Manual I am wrong ... Well, within the range of expectations.
There is no problem if it is bright on electricity, but just to be sure, I think that it was better to have a service manual.
The installation of Cowl has two kinds of Bracket (Two of the short depth and the long type) Since it is attached, it is possible to install in the model of Large general, but Bracket's material is not good (The quality of Plastic Material is subtle) So, in the long run it may be better to switch to a Bracket that Yamaha OEM is likely to meet.
If you are familiar, you can install it in about an hour.
Well, although it looks like it's important, I felt relieved when the old deco light cowl was replaced, it became really cool.
If you are not familiar with Motorcycle, you may misunderstand that it was attached from the beginning (← too much?).
Although it is the light intensity of Headlight, I think that it is no problem unless running like a beast road at night.
However, the absolute amount of light is lower than that of H4's Highly Efficient Halogen Bulb.
If you want brightness, we recommend purchasing Halogen bulbType Headlight cowl from the same Manufacturer.
If you want to image Sharp looks, or if you think that you want to change OEM's Cowl, I thought that it would not be a problem if I purchased it.
View detail
Fits: KTM XC, KTM SX-F, KTM SX, KTM XC-F
Is Orange color like this?
POLISPORT Poly sports8456500002
With the same part number Quantity : 2 Set Order,
Did you receive the same part number
If you look inside it is a different color?
Is Orange color like this?
View detail
Even the tint
Completed installation for CR for CRM 250 RK.
I knew that the shade was different but UFO UFORed was missing at the time of ordering, so I misunderstood that the color was darkly fluorescent after purchasing Challenge. But I feel like I can use it somehow. But exchange to the UFO is planned.
View detail
It is very suitable for my motorcycle
My first purchase on Webike for my motorcycle. It fits my bike very well, good material, meets many standards and it's made in Portugal not China, I love that, thanks Webike! The first time I shopped on my bike for Webike. It's good for my car, good material, standards and it's made in Portugal, not China, I like it, thanks to Webike!(translated by Google Translator) View detail
Fits: HUSQVARNA TC, HUSQVARNA FC, HUSQVARNA TE, HUSQVARNA FE, HUSQVARNA TX 501, HUSQVARNA FX 501, HUSQVARNA FE 501, KTM SX, KTM XC, KTM SX-F, KTM XC-F
OEM same etc. ?
Is it the same as HUSQVARNAOEM?
I listened to OEM and tried it
Feeling looked at OEM and the like. I think
I am going to install it, but I hope to install it.
View detail
Fits: YAMAHA WR450F, YAMAHA WR250F, YAMAHA YZ250X, YAMAHA YZ250, YAMAHA YZ125, FANTIC XX125, FANTIC XE125
The display of compatible model - - -
Since I did not have WR 250 F 08 in the conforming model, I bought it with only 8 cars. I was able to install it smoothly without machining pearls. The compatible model which can be confirmed at the time of purchase and the compatible model which is described in the product were different. It is 100 points perfect if it is stated securely! View detail
Parenthesis OK
You can also install it intuitively.
Valve is still dark
I replaced it with LED Bulb and solved it.
Recommended when you want to change the atmosphere of Motorcycle.
View detail