Reviews
Fits: Others
Good thing it's so light!
It was cold, so I warmed up with Dryer to prevent the plastic from cracking. It was cold, so I worked with Dryer to warm up the plastic so that it would not crack.
My RALLY50 had a grip heater from the moment I bought it, and the handlebar was open end, so I didn't have to modify it.
It doesn't weigh much, so I didn't feel uncomfortable handling it at all.
The only thing is that theAdapter is a little bit sweet, or the quality is bad, or the way you put it on is bad, or it seems to come loose…wow? I think it's like this.
Well, I guess the worst that can happen is that I'll just buy another Adapter and be done with the costumes!
Two-tone color Guard in White and Black will fit RALLY50, I think!
View detail
Fits: HUSQVARNA TE 250, HUSQVARNA TE 300, KTM XC 300, KTM XC 250, KTM Freeride 250 R, KTM EXC 250, KTM EXC 300
The texture is better than the OEM.
The free ride is a replacement type for the OEM cover. View detail
Eurasian bullshit
The answer was that it would arrive in a week or two, but I ended up waiting four weeks. Too much of a wait!
You made me wait too long! You want me to make a difference? You made me wait too long. You made me wait too long. I've been waiting too long.
View detail
Cool, Race ish!
Headlight must be made into a Projector, but it will be Race ish all at once!
It will definitely be an eye-catching motorcycle.
The Slit at the bottom is desirable because it gives the impression of being fast.
The color is also moist black and has a dignified look to it.
View detail
It's tighter
I use it on my DR-Z400sm.
It's cool just to install it, although the OEM shabbiness isn't bad either...
Not only does it look cool with a single body, but it also looks properly natural.
It's also a deep black color, not cheap at all.
Once it fell over from the Front and was firmly grounded, but it was only scraped off and did not crack or distort.
I think that the use of the attached Spacer was slightly confusing, but it was not the problem which did Large.
View detail
Fits: Others
Recommendation for those who can cut and shave.
The car is a CRF250M and the Handlebar is used for ZETA's CX Handlebar.
It is not the same as the Hand guard with a frame, but it is not the same as the FirmlyGuard! However, it protects your fist from the wind and small stones. The area is small, but the way your hands get cold in winter is somewhat better than the No Guard. It is somewhat better than NoGuard in winter.
Because this is a universal product, it may take some time to install it. The installation method is quite simple, so there is no problem.
In the case of my CRF, Clutch Side was able to be installed easily. As for Brake Side, the throttle wire interfered with the product image, if you compare the photograph and the product image, you will understand, but I shaved a "mountain".
I made it easy with Grinder, but the Material is so soft that I think I can get away with hand saws and File.
By installing it, you can get more volume in the car and the off-road feel is much better.
The price is low, and it can be installed with a little effort. The color is also available in each manufacturer's image color, and it is recommended.
View detail
Exactly to Hand guard for the first time
What made you decide to buy?
I bought this product because I was advised by my friends that I should have a hand guard for off-road racing. I've never used a hand guard before, so I didn't know how to choose one, and I chose this one because the price was cheap and the reviews didn't look too bad.
How was your experience with it?
I fell many times during the off-road race and the hand guard did not break and protected the lever very well.:It's Plastic, but it seems to have some strength to it.
Also, Material that seems to have strength.:Being lighter than the aluminum Hand guard, the Handlebar also felt lighter to handle.
Was the installation difficult?
I put the hand guard on for the first time, and it was Large strange to fasten the clamp part while dodging the wiring and so on.
【Please tell me the installation point and hang】
At first, the clamp part didn't fit on the Handlebar at all and I was in a hurry, but it's plastic and flexes well, so you can bend the hand guard to fit the shape of the Handlebar without any problems.
[Was the Instruction Manual easy to understand?
The instruction manual is in English version, so I don't understand the explanation well. I was able to install it with only a diagram because there is a diagram in every process.
[Included Parts:were they on?
All the necessary parts for installation are included, and the inner diameter of the handlebar is wide enough to fit most large handlebars.
[Was there anything that disappointed you?
None in particular. The strength was enough for the price, so I'm satisfied with the cosmetics.
Do you have any wishes or improvements you would like to make for the Manufacturer?
It's a foreign product, so I thought it would be like this.
[Do you have any products to compare it to?
None because it's my first product.
View detail
Cosma Large.
Something to protect your hands from the cold but not tacky in the winter, Aluminum bones (Grip Guard) If you don't want it, this is definitely Recommendation. The cost performance is very good. View detail
Fits: YAMAHA YZ 250F, YAMAHA YZ 250FX, YAMAHA YZ 450F, YAMAHA YZ 250, YAMAHA YZ 125
In use with Number Plate.
I chose this product to convert my WR250X into a Number Plate.
Meter is relocated, Light is two lights at PIAA and Front Fender is OEM.
The installation is all Tie Wrap. I couldn't install it tightly by myself.
The OEM Blinker will get it right, but it will look more like it if you remove it.
View detail
Fits: YAMAHA YZ 450F, YAMAHA YZ 250F
The prices are insanely low!
This is a great party for people who fall down often in Off.
It's pretty Reasonable, and it looks like it will be a very aggressive ride.
The thing itself is cheap and cheaply priced, but I think it's reasonable considering how it's used in the first place.
View detail
Everything fits.
POLISPORT has a lot of universal products, but I think they have a line up of products that are easy to match with any car.
It's also very cost effective, which is handy for the fragile Off-road exterior.
View detail
High cost performance
I bought the POLISPORT Poly sportsFork Boots because I needed them for this occasion.
I think the quality of the product is reasonable for the price range
It's safe to say that you won't be disappointed by the amount of gold you buy, which is Large
The quality of the product itself is guaranteed to some extent, so if anyone is struggling with it, you might want to pick it up.
View detail
Fits: Others
This is so cosy!
I installed it on my Yamaha WR250R.
Made of plastic, it is light, fashionable and strong in color.
It's easy to use.
I bought a separate adapter to attach it to the WR, but it only takes about that long.
View detail
I don't know what the price is.
I bought it to play Off. I'm a novice.
I bought it, but I have to admit, I'm not sure if this is a good quality for the price.
I bought this because I've had a knee injury before and wanted to guard it there.
For that matter, it's Simple, but it's OK because they will protect you.
But I would like to see a bit more of a luxury feel to it, as each piece of Parts is so light.
View detail
Fits: Others
Installed on a WR250R
I bought it to install on my Yamaha WR250R.
I bought the Guard from the company, but I had to use this Adapter to get the ideal fit, so I replaced it with this one.
It was a good installation and it was nice and rigid.
View detail
Safety first!
I bought this for the safety of my daughter's first motorcycle ride!
It's easy to put on and take off, so even children can wear it with ease.
It's solidly constructed, so it's perfectly safe!
She's happy to be a little cooler, and when she rides a motorcycle, she's happy to be a part of it.
I've got it on tight!
View detail
Fits: KTM 530EXC, KTM 505SX-F, KTM 500EXC, KTM 400EXC, KTM 450EXC, KTM 450SX-F, KTM 350EXC-F, KTM 350SX-F, KTM 350XC-F, KTM 250XC, KTM 250XC-F, KTM 300EXC, KTM 250EXC-F, KTM 250SX, KTM 250SX-F, KTM 200EXC, KTM 200XC, KTM 250EXC, KTM 125EXC, KTM 150SX
Used for free rides!
HardEnduro, G650 XCOUNTRY, Enduro, KTM and Freeride, which are doing a great job of touring in the woods, and the Inner Tube is now scratch free! View detail
Fits: YAMAHA WR 450F, YAMAHA WR 250F
It's a premise that will fall apart.
If you're an Off-road with a lot of falls, etc., this price is pretty cosmopolitan.
The OEM also has a cheap-looking exterior, so there's nothing wrong with Poly sports.
Parenthesis can be done well with good painting and film.
The shape is the same as the OEM, but the mounting holes are a little bit different from the Gap.
View detail
How durable is it?
It is Elastic band which seems to be weak against ultraviolet rays, but I bought it because I thought that availability is high because it is Rubber.
It is a good choice for retrofitting a road motorcycle with a Bikini Cowl and it is a very nice floating mount. I think it is necessary to change it periodically, but if the weight of the cowl is not so heavy, it is enough to use it.
If you do it well, you won't need to make a complicated bracket, which is why I recommend it.
View detail
good
Good product. The installation accuracy is perfect and Bolt On. It even includes a glass wool component with a tape for heat shielding to cope with the heat of Silencer. I think it is a perfect product. View detail