Reviews
The look was to my liking.
I like the way it looks, but the bulbs are EURO bulbs, so the number of bulbs that can be changed to LEDs is very limited.
In addition, the Headlight terminal is a Hira terminal, so the Wiring and terminal must be provided, and since there is no Cutline, it may not be possible to drive on public roads.
View detail
It is a little small, so you may need to be careful depending on the type of car.
[How is it used?
I found this product when I was looking for a new light cowl because the vehicle light I had received was a battered Other Brand Product.
I purchased this product in the hope that it would moderately mask the Harness and Meter around the Light in the Front section.
Was the one you received as per Image?
It was a little smaller than I had imagined, and I felt that it was not suitable for my purpose of use. It was a little smaller than I had imagined.
How was your experience with it?
When actually installed, the overall size of the light was too small to fully hide the electric wiring that would collect around the light, and the dimensions above the light were too short to expose the Speedometer, resulting in an overall appearance of poor balance.
The design itself is a good parenthesis, so I think it would be a good fit for cars equipped with compact digital meters these days.
[Points to note]
It is difficult to grasp the overall size of the product unless you see the actual product or see a picture of the product installed on a vehicle.
The design seen from the front is intrepid and Parenthesis is good, but it is a flat design, so when you look at it from the side, it looks like... what is it? It is a flat design, so when you look at it from the side, it looks like... what?
How did it compare to other products?
The design is not inferior to other companies' products, it depends on the vehicle and the installer's Sense (my installation of Sense was incompatible with the vehicle in which I installed it).
Other items that would be helpful
Point and hang of installation
Elastic band and material for mounting:Two types of side stays for plastic installation and bolt & lock nuts are included in the package, so you can install them with your sense of parenthesis.
[ITEMS TO BUY TOGETHER
The H4 head lamp bulbs that are initially installed are not very bright. You may want to consider brighter H4 bulbs or LED Lamps.
[Opinions and requests to Manufacturer
I replaced the reflector in the Lens with an LED position bulb, and the progress stopped, but I would like to see better thermal countermeasures.
View detail
In use on KLX230
KLX230 (SE) I bought it in Design, although it is being used for
The functionality of the car is honestly very dark, and I'm not sure if it can be used on public roads, since the street lights are brighter and there is no cutline. ()
As for the feel of the product, it's just cool w
There are three Wiring itself, Black Wiring is Earth?
If you match with the general Wiring color, the high and low will be reversed, so it is better to confirm the intention of the bulb you want to light before assembling in advance.
I lowerQuantity at the time of low:2pc. The Set is lit, the high switch is On, and the top bulb is also lit.
The body is assembled with elastic band on the lower side only, but it is too long and loose for the upright suspension. The inner tube of KLX230 is m37, so I think it is the right size for the inverted suspension. The upper part of the bracket is made by purchasing a bracket at Home center and drilling a hole in the plastic part where the Elastic band is attached and screwing it in place. 。
There is also an interference point where the brake hose hits the side of the hose, so I used a design knife and a nipper to cut the hose diagonally upward to alleviate the interference.
View detail
How durable is it?
It is Elastic band which seems to be weak against ultraviolet rays, but I bought it because I thought that availability is high because it is Rubber.
It is a good choice for retrofitting a road motorcycle with a Bikini Cowl and it is a very nice floating mount. I think it is necessary to change it periodically, but if the weight of the cowl is not so heavy, it is enough to use it.
If you do it well, you won't need to make a complicated bracket, which is why I recommend it.
View detail
If attaching importance to appearance the best is Cool!
OEM's Headlight cowl is not bad either, but when compared with WR 250 or a little, is it a bit strange? Design is not good?
Or rather, I do not want Number Seal to be somewhat disgusting, although I put a homemade Cutting sheet, it is extremely unpopular (Tears) So, I wanted to do ime Chain, I bought this Headlight cowl that I had been worried about before now.
Although the color is Yamaha blue ... I do not mind, though Plate is originally White, the colors of Number Seal and Cowl are reversed, which is a bit frustrating.
..., so it's hard to install as it is.
LANZA Halogen bulb of H4 (Sankei Socket) Anyway, this Headlight is Straight's 4PinConnector, and the power side must also change it.
In my case, thinking to restore, I replaced Headlight's Connector with Universal's Triple Socket.
At that time, the Wiring of Low beam and High beam was reversed, and I reconnected again (T д T)
Instruction Manual I am wrong ... Well, within the range of expectations.
There is no problem if it is bright on electricity, but just to be sure, I think that it was better to have a service manual.
The installation of Cowl has two kinds of Bracket (Two of the short depth and the long type) Since it is attached, it is possible to install in the model of Large general, but Bracket's material is not good (The quality of Plastic Material is subtle) So, in the long run it may be better to switch to a Bracket that Yamaha OEM is likely to meet.
If you are familiar, you can install it in about an hour.
Well, although it looks like it's important, I felt relieved when the old deco light cowl was replaced, it became really cool.
If you are not familiar with Motorcycle, you may misunderstand that it was attached from the beginning (← too much?).
Although it is the light intensity of Headlight, I think that it is no problem unless running like a beast road at night.
However, the absolute amount of light is lower than that of H4's Highly Efficient Halogen Bulb.
If you want brightness, we recommend purchasing Halogen bulbType Headlight cowl from the same Manufacturer.
If you want to image Sharp looks, or if you think that you want to change OEM's Cowl, I thought that it would not be a problem if I purchased it.
View detail
This is for Inverted Front Fork
I bought a Universal Product because the Light Belt of the Husk SM450R has expired but it was a for Inverted Front Fork.
Because there is no choice, I forced to stretch it and installed it but it would be a matter of time.
If Universal Product you would like the notation of φ size to be installed.
View detail