Reviews
Fits: YAMAHA YZ125X, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250FX, YAMAHA YZ125, YAMAHA YZ250X, YAMAHA YZ450F, YAMAHA YZ450FX
Purchased White for Decal paste
I bought White to match Decal. 。 The OEM YAMAHA Logo has a convex shape, but this one is plain and can be applied cleanly.
Relief shape other than Logo and others are similar to OEM!
The OEM did not think anything of it.
It goes on easily, but I wonder if the Body of this one is slightly deformed.
Hole position did not match Exactly.
Screw one of the first three holes at the end, and the other holes are used for the Body.
The holes were aligned as if they were pushed in or aligned with each other, and the screws were inserted into the holes without any problem.
Be careful not to insert the screw into the gapped hole by force, as it will enter the screw at an angle and damage the screw threads on the fork side.
There is no distortion after installation, and the gap between the Fork and the Fork has been properly taken care of.
View detail
2022 yz250x
All-around protection. Good quality yz250x View detail
That's good. That's good!
Fitted with no problem!
I think it's usually good.
View detail
Fits: BETA RR350 4T, BETA RR300 2T, BETA RR250 2T, BETA RR125 2T, BETA RR480 4T, BETA RR430 4T, BETA RR390 4T, BETA RR200 2T, BETA X-TRAINER250, BETA X-TRAINER300
Easy to install
The fitting is good and it goes on easily. View detail
Fits: HUSQVARNA TE250, HUSQVARNA TE125, HUSQVARNA TC125, HUSQVARNA FE450, HUSQVARNA FE350, HUSQVARNA FE250, HUSQVARNA FC450, HUSQVARNA FC350, HUSQVARNA FC250
Mounted on TE250
I always ride HUSQVARNA's TE250 for forest road touring and hill climbing.
After about a year of use, the exterior of the car was getting worn out and the fork guard was getting cracks. I tried to order the OEM exterior, but it was very expensive. I tried to order OEM exterior but it was very expensive.
Now I can ride my motorcycle in Paris for another year.
View detail
Fits: HUSQVARNA TE250, HUSQVARNA TE125, HUSQVARNA TC125, HUSQVARNA FE450, HUSQVARNA FE350, HUSQVARNA FE250, HUSQVARNA FC450, HUSQVARNA FC350, HUSQVARNA FC250
The textures are perfect!
It wasn't included in the EnduroKit91023 picture, so I bought it along with it. However, it was actually in the EnduroKit, so I ended up buying two of the same thing. I'll use it someday because it's too much trouble to return it. View detail
Fits: KTM 530EXC, KTM 505SX-F, KTM 500EXC, KTM 400EXC, KTM 450EXC, KTM 450SX-F, KTM 350EXC-F, KTM 350SX-F, KTM 350XC-F, KTM 250XC, KTM 250XC-F, KTM 300EXC, KTM 250EXC-F, KTM 250SX, KTM 250SX-F, KTM 200EXC, KTM 200XC, KTM 250EXC, KTM 125EXC, KTM 150SX
Used for free rides!
HardEnduro, G650 XCOUNTRY, Enduro, KTM and Freeride, which are doing a great job of touring in the woods, and the Inner Tube is now scratch free! View detail
Is good
The color can be changed at a low price against OEM, and the accuracy of the stopping point is Bolt On without any problem at all However, it is a must to stick Decal because it comes off the polish when parts cleaner is blown View detail
Fits: YAMAHA YZ125X, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250FX, YAMAHA YZ125, YAMAHA YZ250X, YAMAHA YZ450F, YAMAHA YZ450FX
For OrderDecal
Decal cannot be applied to the OEM because of the floating logotype of YAMAHA
Third party products don't have them, so they can be applied firmly
The problem is that the hole accuracy is a bit poor
View detail
Expected
I bought it to divert it to the D Tracker
8-10φs drilling and 10mm spacer is needed for installation But even that [Color] It is relatively easy to change the look and feel of the game by Clear
On the D Tracker, the clearance with the Tire is narrow and installs without interference You need
If you have a Front120 wide Tire installed, this is not limited to this product, KX250 When I installed the FFork Guard, I felt that it interfered with the Tire It was
View detail
Good for color change
The shape and texture are almost the same as the OEMs
However, when it comes to installation, it's not very accurate and you have to pull to fit the screw holes
Thanks to this, though, there is no tension-induced rigidity after installation
And put the Gold genus color between the screw hole and screw
(This is OEM, the color Gold is welded to the resin of Fork GuardBody So this area is different
The screw holes may be damaged if you install it in a haphazard manner, but since it is a part to be removed frequently, it is a good idea to take it off frequently
If you're not interested in color-changing, I would recommend OEM, although OEM is a bit more expensive
View detail
Fits: BETA RR350 4T, BETA RR300 2T, BETA RR250 2T, BETA RR125 2T, BETA RR480 4T, BETA RR430 4T, BETA RR390 4T, BETA RR200 2T, BETA X-TRAINER250, BETA X-TRAINER300
Bad product precision
This time for the first time I bought a poly sports product, but I took it out of the bag, firstly the product is thin compared to the OEM!
Right Side is attached Screw hole accuracy is poor, it can not attach to Smooth, it is warped.
Left Side has good accuracy but Screw of Brake hose clamp has been licking from the beginning! Moreover, since Screw protrudes to the Reverse side, processing is necessary.
Since it is an overseas product, I can endure somewhat of the installation accuracy etc, but this evaluation is because Brake hose clampScrew is not allowed to lick from the beginning. I will not buy anymore, I can not recommend it!
View detail