Reviews
Bolt holes match, so it is possible to mount the bolt.
[How is it used?
Last 2CycleMotorcycle of my life!" KDX220SR was purchased used with great enthusiasm.
Since the vehicle is over 20 years old, it is inevitable that the exterior will become crusty due to UV rays and age-related deterioration.
Since the design of the Front Fender has almost no connection with other refurbished panels, we dared to purchase and install a product with the same design as the current Kawasaki off-road model, regardless of the design at the time of its release.
It may not be suitable for those who want to finish with OEM parts of the time, but I personally feel no discomfort, and I think it was a good purchase because it is difficult to be distorted by wind pressure while driving and the handlebar is not taken off while driving on the highway.
Did you receive the item as per the Image?
The product was exactly as shown in the Image because I had to confirm that it was the same design as the vehicle currently being discussed by Kawasaki.
Was it difficult to install?
It is an extremely simple job, simply remove the four Front Fender mounting bolts that were originally installed, remove the wires, and then install them in the reverse order.
How did you like it?
There is a gap of more than 20 years between the exterior design of the Front Fender and Others installed this time, but I personally do not feel much discrepancy.
Is this because it is not installed consecutively with other exterior parts as mentioned above?
I don't know if it's because I'm replacing the light cowl with a product from another Design company. (OEMLight is too dark and has been replaced with a light cowl that can be fitted with H4Type Valve). 。
Ultimately, if the owner likes it. (This is based on the assumption that Large is not a nuisance to those around you.) I don't see any problem with what a third party can say.
It is a world of complete self-satisfaction, but I am happy just looking at my car in its Beauty exterior.
Was "Included Parts:" attached?
Front FenderBody only, no Included Parts:or Instruction Manual.
Were there any disappointments?
Nothing personal, I am Large satisfied because I was able to purchase a product of the same design for a little less than OEM Product.
Other items that would be helpful
Point and hang of installation
In a sense, this product is also like OEM parts, so there is no hang or anything, but it is definitely better to temporarily assemble the product and adjust the overall adjustment before fixing it in place, just to be sure.
[Availability and clarity of the Instruction Manual
No Instruction Manual, no, but as noted above. All you have to do is remove the same type of parts that were originally installed and install them in the same way." So I don't think Instruction Manual is necessary.
[Notes]
Nothing in particular, if it is an Other Brand Product. Screw holes won't fit." However, this product has no Bolt hole gap and can be assembled without any problem.
The bolt holes are slightly wider to allow some forward/backward movement for balance adjustment. "Temporary group." I would recommend that this fixation be made from
[ITEMS TO BUY TOGETHER
Since the motorcycles themselves are more than 20 years old, sales of OEM parts as well as other brand products are about to end.
It may be a good idea to Stock items that can be replaced while they can be purchased and parts that may need to be replaced in the future.
[Opinions and requests to Manufacturer
We look forward to a long and continued Lineup.
View detail
CRF250L with a pontoon
I bought this product because I wanted to put together the cowl and other parts of my CRF250L in White. I had bought the same product in Red before, so I knew I could put it on my CRF250L, so I chose this over the more expensive OEM.
Since it was originally designed for CRF150L, there is a gap under the headlight, but I think it looks good.
View detail
Fender, full of Wound, was replaced with this one.
The OEM Front Fender is over 10,000 yen, so I decided to go with the less expensive polisport Universal Product. The quality of the product is better than Large.
Surprisingly, it could be installed without any modification. 1cm spacer was inserted in the 4 screws to complete the installation.
SEROW Hook and Quantity to Fender extending from Headlight cover:I have 2pc's plugged in, but there seems to be some interference.
I did not process it because it was not a concern.
The front length is a little shorter, but the rear frame side is not a buttstock of the OEM, so it looks more like a parenthesis.
View detail
ส่วไว งานดี มีคุณภาพ สวยงาม สินค้าดี ถูกต้อง แพ็คของได้ค่อนข้างดี View detail
สวยครับมาก verry good ส่งรวดเร็วมาก สีตรงกับรถ View detail
Poly sports SM Fender UFX Front Fender
I was looking for a short fender to MOTARD my crf250ls md47 and found this product!
The fitted look was perfect!
I'm glad I bought it!
View detail
POLISPORT SM Fender UFX Front Fender
I was looking for a short fender for my CRF250ls to be MOTARDed and found it.
When we installed it, it looked perfect.
With other Fenders, there was a gap between the headlight cowl and the headlight cowl when installed, which was subtle, but this one was shaped to fill the gap nicely, just like the Image.
View detail
Fits: KTM 350XC-F, KTM 350EXC-F, KTM 125EXC, KTM 500EXC-F, KTM 450XC-F, KTM 450EXC-F, KTM 300EXC, KTM 250XC, KTM 250XC-F, KTM 250SX, KTM 250EXC-F, KTM 250EXC, KTM 200EXC, KTM 150SX
Installation on other vehicles
I bought this product to install a KTM Fender on my WR250X because I don't want to have a Custom with others.
Light cowl is also KTM, by the way.
It requires a lot of work to install, but it has improved Parenthesis considerably.
In terms of the balance of the car body, the Fender is longer, so it is shortened a little.
View detail
Fits: YAMAHA YZ250X, YAMAHA WR450F, YAMAHA YZ125, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ450FX, YAMAHA YZ250FX, YAMAHA YZ450F
Mounted on XTZ125
[How is it used?
Diversion to XTZ125
Was the one you received as per Image?
The quality and design were both GOOD!
Was the installation difficult?
Small processing such as drilling is required.
The installation work has been uploaded to my maintenance diary. I hope it will be helpful.
https://imp.webike.net/diary/233508/
View detail
โอเคครับ สวยได้ของตามสั่ง View detail
In MOTARDFender, best recommended
[How is it used?
Installation Type:D Tracker
Traveling:Touring, mountain passes
Replaced another company's MOTARDFender. Used for about 4 years after replacement.
Was the one you received as per Image?
It's just like the image. I've been using it for a few years now, and I'm very happy with it.
Was the installation difficult?
This product has holes drilled from the start, and its unique hole alignment system makes it easy to install, not only for the D Tracker but for a wide range of car models.
For mounting angle adjustment, a washer was used.
How was your experience with it?
The style is large and strange, and I've used about three social Fenders, but this is the one with the best parenthesis appearance.
The D Tracker has a large Radiator area, so I didn't feel much benefit from it, but I can easily see it becoming a Plus.
I also felt that it was cosmetically sound and would be easy to replace if damaged.
[Included Parts:were they on?
See product description.
[Was there anything that disappointed you?
None
Point and hang of installation
When installing an external fender, it is recommended to use a stainless washer of size M8 and above to adjust the final installation position. This will allow you to adjust the installation angle to avoid slight interference with the frame.
When I introduced the external Fender, I was adjusting everything with Washer.
For the washer, it is easier to use Aron Alpha's instant adhesives to align the holes and temporarily attach the washer.
View detail
Installed on KLX250.
I'm very happy with the large size and the mud splatter is reduced. View detail
Installed on CRF250L
I bought this one for my CRF250L because I put CRF150L-Type Headlight on my CRF250L. The headlight is very easy to install and the bolt color is very good. View detail
สวยงามมากครับ แข็งแรง ทรงรถดูเพรียวรีดลมดีมากครับ View detail
Fits: YAMAHA YZ250FX, YAMAHA YZ250F, YAMAHA YZ250, YAMAHA YZ450FX, YAMAHA YZ450F, YAMAHA YZ250X, YAMAHA YZ125X, YAMAHA YZ125, YAMAHA WR450F
D I installed it on my Tracker250!
I installed it on my D Tracker250.
There was no interference with the Radiator and I was able to install it without any modification!
Because the Fender is longer in the front, mud splashes etc. are much more preventable on rainy days!
Now it looks like a WR250, like a Racer! I'm happy with it.
View detail
อาทิตย์เดียวได้ของ นึกว่านานกว่านี้ ชอบเลย เดียวต้องแนะนำเพื่อนๆต่อ View detail
Expect a drop in water temperature
Because the 2 division Front Fender for wr250x that I used for a long time faded, I put another Fender this time of Poly sports, but the water temperature seems to rise whether it is the relation of the Slit position. (Checked with a retrofit water temperature gauge) I'm not sure what to do with it. So I replaced it with this MODEL where Slit is close to Radiator. Iwate is the time of year when I can not ride Motorcycle, and I have not tested it, but it seems to be effective. View detail
It's tighter
I use it on my DR-Z400sm.
It's cool just to install it, although the OEM shabbiness isn't bad either...
Not only does it look cool with a single body, but it also looks properly natural.
It's also a deep black color, not cheap at all.
Once it fell over from the Front and was firmly grounded, but it was only scraped off and did not crack or distort.
I think that the use of the attached Spacer was slightly confusing, but it was not the problem which did Large.
View detail
Fits: YAMAHA YZ250F, YAMAHA YZ250, YAMAHA WR450F, YAMAHA YZ450FX, YAMAHA YZ450F, YAMAHA YZ250X, YAMAHA YZ125X, YAMAHA YZ125, YAMAHA YZ250FX
Nice touch!
I installed it on my WR250R
When the one I was using before fell down, the Fender hit the standing tree and the Front Only the front side above the fork has broken off
I've been running without a front side for a while, but I'm covered in mud and when I drive on public roads on a rainy day, I'm going to have to take the Shower I decided to buy it because it would take so much rolled up water sibling that I thought I was being bathed in it
The car was WR250F compatible, but Well, it's about the same! So I bought it
As a result, it needed to be machined to be installed
The front and rear holes in the Fender were too far apart to pontificate on
I drilled a hole in it and installed it
It was a soft material, so it was easy to make a hole
There is a Large difference between having a Front Fender and not having one! (Lol)
View detail
Pretty good
I haven't installed it yet, but since I'm a Manufacturer here, it's an accuracy issue The fact that there was no discomfort when it was stacked with the Side cover shows that there is no I would say that the same can be said for the Also, there is no BALI and the texture is good But there is a hole at the position which seems to be a seam of the mold It is located at the bottom of the back end of Seat But it is not so obvious unless you look closely
For these reasons, I can say that it is a good cosmetic product and recommended
In addition, because I am not compatible with the vehicle of another manufacturer, it is naturally Large It needs to be processed What is this guy doing?
View detail