Reviews
It is inexpensive and Parenthesis is good!
I wanted a closed type hand guard, and at first I was going to buy a ZETA, which is available only for car models, but I was hesitant because of its high price.
After much thought, I remembered this product that I use in my SUPER CUB, and when I checked the price again, I was astonished at how inexpensive it was and purchased it immediately! (Lol)
SUPER CUB is in Black, but CRF is in White.
The hand guard itself was not a simple installation, but rather a simple cut where the brake hose interfered. The holes for the handlebar clamp did not fit.
The material is soft, so processing is not a pain.
It is inexpensive, and if you like the shape, you can buy it on the assumption that it will be processed.
However, if the purpose of attaching a hand guard is to protect against wind and cold, we recommend that you purchase a larger hand guard.
As for me, I like it very much... ♪
View detail
No complaints at all so far.
I installed this bike for Enduro race on my KLX230R. it is fixed in two places at the handlebar and bar end to protect my hand and lever. the material is plastic and there is no gold frame, but I have used it for about 2 years and there is no trouble such as lever breakage. There is no trouble such as lever breakage after about 2 years of use. Since it is a universal product, it is necessary to cut some parts of the frame to make it fit perfectly, which is a little time-consuming. However, since the material is plastic, this is relatively easy to do. View detail
Fits: HUSQVARNA FE501, HUSQVARNA FE250, HUSQVARNA TE300, HUSQVARNA TE150, HUSQVARNA FE250-501, HUSQVARNA TE150-300
As Repair Lever
[How is it used?
I play mainly in Enduro race with HUSQVARNA TE250I.
I broke the brake lever during a practice run.
Pivot Lever Purchase
Was the one you received as per Image?
Installation can be easily done without removing the OEM lever.
The texture feels a little cheaper than previous Aluminum models, but it feels good to hold.
It was a little more Short lever style than OEM, which was surprisingly good for me.
I think this will alleviate the worry of it breaking in the event of a fall, but I haven't fallen over it yet, so I'm not sure how durable it is.
View detail
Fits: YAMAHA YZ, YAMAHA YZF, YAMAHA YZ125X, YAMAHA YZ250X, YAMAHA YZ250FX, YAMAHA YZ450FX
It has become a must-have item.
The shape is OEMLever itself.
The rigidity of the lever itself does not have any strange rattling, and it feels just like OEM.
Bottom line. Unbreakable." It works well enough as far as I'm concerned.
Bent Levers need to be put back by hand, but this should not be a problem for the average adult male.
There is probably nothing that surpasses this Lever in terms of cosmetics.
It's a good product
View detail
WINnedProtector is easy to lose.
Total Material as well as KTMOEM:I like that it is Plastic.
We feel that it is moderately strong and supple and will be the first source of Damage in the event of a fall.
The problem is that the Black WINDProtector can be easily blown away by a Bush or tree branch and lost.
Grip end fixed Guard in general, but it is inconvenient that you can't hang a little Helmet on the Grip.
View detail
Repair parts were available for purchase!
I had given up on it because it was an overseas product, but I happened to be looking at it and found it and ordered it immediately. View detail
Fits: Others
Easy to install! Cost-effective!
I was looking for an all plastic hand guard like the ACERBIS BirdFit and found this product from Poly sports.
Reasonable and recommended compared to Zita.
KX85 is light and does not need to be made of Gold genus, but it will be in Enduro, so it will be Large sturdy if you can protect your hands and Lever to some extent.
I haven't used it yet so I don't know how durable it is…
[How is it used? Used in KX85.
Was the one you received as per Image? As per Image.
Was the installation difficult? It is very easy.
Point and hang of installation The Clutch Side can be easily installed as it is, but the Brake Side is not as shown in the photo because the MASTER and Hose are in the way.
Cut and installed.
How was your experience with it? It has not been used, but I believe it is like ACERBIS BirdFit.
[Included Parts:were they on? Comes with mounting kit.
[Was there anything that disappointed you? None in particular.
[Availability and clarity of the Instruction Manual Instruction Manual is included but only in Illustration.
View detail
Fits: Others
Processing is required, but it's cheap, so it's good!
I was looking for a cheap hand guard that is not Solidly's CloseHand guard, and I found this one.
Parenthesis is ◎! Off car for cosmetics for the price, it deepens the taste of the car.
As for durability "It cracks easily." However, it is good if the handlebar can be made to tilt while at the same time serving as a bush guard at least.
The mounting holes on the One Side are incredibly gapped, and I couldn't help but think that they are cheap and accurate, but that's okay because they are cheap.
View detail
สวยมากครับ สินค้าดีราคาดีมาก จัดส่งเร็วใช้ได้เลย ไว้คราวหน้าซื้ออีกครับ View detail
It is a Universal Product, but you choose the mounting location.
[How is it used?
I bought this to install on my Yamaha WR155R.
Was the one you received as per Image?
The product was exactly as shown in the picture.
Was the installation difficult?
As a result, it did not come on the WR155R as it was.
So it is not installed now.
I had to install the Adapter on the Hand Guard because there was no good part around the Handlebar and I could not find a good place to install it.
Quantity even if forcibly attached.:Pair (for Left and Right) I gave up on Balance because it was not beautiful in
I tried turning the Adapter upside down and shifting the Lever and Switch positions, but it didn't fit.
Maybe it would be good to wear it on Racer, etc.
We are keeping it in storage, believing that it can one day be used for other types of vehicles.
How was your experience with it?
Unfortunately, it is not working.
[Included Parts:were they on?
Instruction Manual
[Was there anything that disappointed you?
Since it is a Universal Product, I think it is generally acceptable and can be installed, but since it did not attach well to the WR155R, I will consider installing it with something else.
View detail
Easy to install_Cosy, but be prepared for cracks.
Material:I thought about Aluminum, but the ease of installation (I can keep using the same mount) made me think about Aluminum.
Material of this Type:I continue to use PlasticHand guard.
However, it is plastic and will crack.
Right Side is not cracked and still has a 10 year old polisport product on it.
I had been using Left Only low-priced products, but they cracked twice in a row this past year.
I have returned to polisport this time.
I look forward to seeing how much use it will be in the future.
It comes with installation documents. If you have installed it before, you should have no problem.
Even if it is slightly off, it is plastic, so it will fit if you push it hard enough.
I wish they would sell One Side!
View detail
Hand guard parts
I never expected to find the Poly sports hand guard repair parts I was looking for on Webike.
I was thrilled because I had given up halfway through.
View detail
สินค้าดี มีคุณภาพ สวยงาม ทนต่อการใช้งาน ชอบมากๆครับ สวยมากๆครับ สินค้าดี มีคุณภาพ สวยงาม ทนต่อการใช้งาน ชอบมากๆครับ สวยมากๆครับ สินค้าดี มีคุณภาพ สวยงาม ทนต่อการใช้งาน ชอบมากๆครับ สวยมากๆครับ สินค้าดี มีคุณภาพ สวยงาม ทนต่อการใช้งาน ชอบมากๆครับ สวยมากๆครับ View detail
Excellent COSPA
I have been riding the KLX230R with the open end, but I'm not very good at it and I fall down a lot, and in the woods and on the river course, there are a lot of branches and grass in the way, so I decided to get a close type hand guard.
I had to change the handlebar on my KLX230R and shorten the length of the handlebar to fit the bracket. With the ZETA Guard, the bracket interferes with the MASTER, so I had to be a little creative.
It's not a product that completely guards the lever from breaking like the Gold Guard, but it's a Poly sports hand guard, and it doesn't seem to break. Even if it gets scratched, it's good that it doesn't bother me too much because it's inexpensive.
If you have no problem with the installation and you like the design, you can start with this hand guard.
I use ZETA PivotLever's 3Finger because I put Hand guard on it.
View detail
Cospa strongest
[How is it used?
Used for Motorcycle for Enduro.
I used to use ZETA's SIDEMount Kit and Aluminum Handguard for the best Spec. I used to do that, but I lost the flex of the handlebar, and it caused my arm to rise up, and it was too heavy and tiring, so I use the light and flexy hand guard of All plastic.
Was the one you received as per Image?
Just like the image. The finish is a bit messy and the bolts are small. That's what I think.
Was the installation difficult?
Even a monkey can do it.
How was your experience with it?
It doesn't get damaged even if you throw it around quite a bit.
There is quite a bit of flexibility in Plastic.
[Included Parts:were they on?
Mount only.
[Was there anything that disappointed you?
For the price, I don't think you'll be disappointed.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Cannot be installed on Fat bar.
View detail
Fits: Others
Good thing it's so light!
It was cold, so I warmed up with Dryer to prevent the plastic from cracking. It was cold, so I worked with Dryer to warm up the plastic so that it would not crack.
My RALLY50 had a grip heater from the moment I bought it, and the handlebar was open end, so I didn't have to modify it.
It doesn't weigh much, so I didn't feel uncomfortable handling it at all.
The only thing is that theAdapter is a little bit sweet, or the quality is bad, or the way you put it on is bad, or it seems to come loose…wow? I think it's like this.
Well, I guess the worst that can happen is that I'll just buy another Adapter and be done with the costumes!
Two-tone color Guard in White and Black will fit RALLY50, I think!
View detail
Fits: Others
Recommendation for those who can cut and shave.
The car is a CRF250M and the Handlebar is used for ZETA's CX Handlebar.
It is not the same as the Hand guard with a frame, but it is not the same as the FirmlyGuard! However, it protects your fist from the wind and small stones. The area is small, but the way your hands get cold in winter is somewhat better than the No Guard. It is somewhat better than NoGuard in winter.
Because this is a universal product, it may take some time to install it. The installation method is quite simple, so there is no problem.
In the case of my CRF, Clutch Side was able to be installed easily. As for Brake Side, the throttle wire interfered with the product image, if you compare the photograph and the product image, you will understand, but I shaved a "mountain".
I made it easy with Grinder, but the Material is so soft that I think I can get away with hand saws and File.
By installing it, you can get more volume in the car and the off-road feel is much better.
The price is low, and it can be installed with a little effort. The color is also available in each manufacturer's image color, and it is recommended.
View detail
Exactly to Hand guard for the first time
What made you decide to buy?
I bought this product because I was advised by my friends that I should have a hand guard for off-road racing. I've never used a hand guard before, so I didn't know how to choose one, and I chose this one because the price was cheap and the reviews didn't look too bad.
How was your experience with it?
I fell many times during the off-road race and the hand guard did not break and protected the lever very well.:It's Plastic, but it seems to have some strength to it.
Also, Material that seems to have strength.:Being lighter than the aluminum Hand guard, the Handlebar also felt lighter to handle.
Was the installation difficult?
I put the hand guard on for the first time, and it was Large strange to fasten the clamp part while dodging the wiring and so on.
【Please tell me the installation point and hang】
At first, the clamp part didn't fit on the Handlebar at all and I was in a hurry, but it's plastic and flexes well, so you can bend the hand guard to fit the shape of the Handlebar without any problems.
[Was the Instruction Manual easy to understand?
The instruction manual is in English version, so I don't understand the explanation well. I was able to install it with only a diagram because there is a diagram in every process.
[Included Parts:were they on?
All the necessary parts for installation are included, and the inner diameter of the handlebar is wide enough to fit most large handlebars.
[Was there anything that disappointed you?
None in particular. The strength was enough for the price, so I'm satisfied with the cosmetics.
Do you have any wishes or improvements you would like to make for the Manufacturer?
It's a foreign product, so I thought it would be like this.
[Do you have any products to compare it to?
None because it's my first product.
View detail
Cosma Large.
Something to protect your hands from the cold but not tacky in the winter, Aluminum bones (Grip Guard) If you don't want it, this is definitely Recommendation. The cost performance is very good. View detail
Fits: Others
This is so cosy!
I installed it on my Yamaha WR250R.
Made of plastic, it is light, fashionable and strong in color.
It's easy to use.
I bought a separate adapter to attach it to the WR, but it only takes about that long.
View detail