Reviews
It is inexpensive and Parenthesis is good!
I wanted a closed type hand guard, and at first I was going to buy a ZETA, which is available only for car models, but I was hesitant because of its high price.
After much thought, I remembered this product that I use in my SUPER CUB, and when I checked the price again, I was astonished at how inexpensive it was and purchased it immediately! (Lol)
SUPER CUB is in Black, but CRF is in White.
The hand guard itself was not a simple installation, but rather a simple cut where the brake hose interfered. The holes for the handlebar clamp did not fit.
The material is soft, so processing is not a pain.
It is inexpensive, and if you like the shape, you can buy it on the assumption that it will be processed.
However, if the purpose of attaching a hand guard is to protect against wind and cold, we recommend that you purchase a larger hand guard.
As for me, I like it very much... ♪
View detail
No complaints at all so far.
I installed this bike for Enduro race on my KLX230R. it is fixed in two places at the handlebar and bar end to protect my hand and lever. the material is plastic and there is no gold frame, but I have used it for about 2 years and there is no trouble such as lever breakage. There is no trouble such as lever breakage after about 2 years of use. Since it is a universal product, it is necessary to cut some parts of the frame to make it fit perfectly, which is a little time-consuming. However, since the material is plastic, this is relatively easy to do. View detail
Fits: YAMAHA YZ, YAMAHA YZF, YAMAHA YZ125X, YAMAHA YZ250X, YAMAHA YZ250FX, YAMAHA YZ450FX
It has become a must-have item.
The shape is OEMLever itself.
The rigidity of the lever itself does not have any strange rattling, and it feels just like OEM.
Bottom line. Unbreakable." It works well enough as far as I'm concerned.
Bent Levers need to be put back by hand, but this should not be a problem for the average adult male.
There is probably nothing that surpasses this Lever in terms of cosmetics.
It's a good product
View detail
Fits: Others
Easy to install! Cost-effective!
I was looking for an all plastic hand guard like the ACERBIS BirdFit and found this product from Poly sports.
Reasonable and recommended compared to Zita.
KX85 is light and does not need to be made of Gold genus, but it will be in Enduro, so it will be Large sturdy if you can protect your hands and Lever to some extent.
I haven't used it yet so I don't know how durable it is…
[How is it used? Used in KX85.
Was the one you received as per Image? As per Image.
Was the installation difficult? It is very easy.
Point and hang of installation The Clutch Side can be easily installed as it is, but the Brake Side is not as shown in the photo because the MASTER and Hose are in the way.
Cut and installed.
How was your experience with it? It has not been used, but I believe it is like ACERBIS BirdFit.
[Included Parts:were they on? Comes with mounting kit.
[Was there anything that disappointed you? None in particular.
[Availability and clarity of the Instruction Manual Instruction Manual is included but only in Illustration.
View detail
สวยมากครับ สินค้าดีราคาดีมาก จัดส่งเร็วใช้ได้เลย ไว้คราวหน้าซื้ออีกครับ View detail
Hand guard parts
I never expected to find the Poly sports hand guard repair parts I was looking for on Webike.
I was thrilled because I had given up halfway through.
View detail
สินค้าดี มีคุณภาพ สวยงาม ทนต่อการใช้งาน ชอบมากๆครับ สวยมากๆครับ สินค้าดี มีคุณภาพ สวยงาม ทนต่อการใช้งาน ชอบมากๆครับ สวยมากๆครับ สินค้าดี มีคุณภาพ สวยงาม ทนต่อการใช้งาน ชอบมากๆครับ สวยมากๆครับ สินค้าดี มีคุณภาพ สวยงาม ทนต่อการใช้งาน ชอบมากๆครับ สวยมากๆครับ View detail
Cospa strongest
[How is it used?
Used for Motorcycle for Enduro.
I used to use ZETA's SIDEMount Kit and Aluminum Handguard for the best Spec. I used to do that, but I lost the flex of the handlebar, and it caused my arm to rise up, and it was too heavy and tiring, so I use the light and flexy hand guard of All plastic.
Was the one you received as per Image?
Just like the image. The finish is a bit messy and the bolts are small. That's what I think.
Was the installation difficult?
Even a monkey can do it.
How was your experience with it?
It doesn't get damaged even if you throw it around quite a bit.
There is quite a bit of flexibility in Plastic.
[Included Parts:were they on?
Mount only.
[Was there anything that disappointed you?
For the price, I don't think you'll be disappointed.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Cannot be installed on Fat bar.
View detail
Fits: Others
Good thing it's so light!
It was cold, so I warmed up with Dryer to prevent the plastic from cracking. It was cold, so I worked with Dryer to warm up the plastic so that it would not crack.
My RALLY50 had a grip heater from the moment I bought it, and the handlebar was open end, so I didn't have to modify it.
It doesn't weigh much, so I didn't feel uncomfortable handling it at all.
The only thing is that theAdapter is a little bit sweet, or the quality is bad, or the way you put it on is bad, or it seems to come loose…wow? I think it's like this.
Well, I guess the worst that can happen is that I'll just buy another Adapter and be done with the costumes!
Two-tone color Guard in White and Black will fit RALLY50, I think!
View detail
Fits: Others
This is so cosy!
I installed it on my Yamaha WR250R.
Made of plastic, it is light, fashionable and strong in color.
It's easy to use.
I bought a separate adapter to attach it to the WR, but it only takes about that long.
View detail
Fits: Others
Not only is it cheap, it's surprisingly durable
I was worried about the performance because of the price, but it's not a problem at all
I feel like an idiot for having bought an overpriced ZETA until now
I've fallen over 30 times since I put these on and haven't had any problems
View detail
Fits: Others
Not only is it cheap, it's surprisingly durable
I was concerned about the quality of the product because it was very cheap, but it was completely safe
It's perfectly light and quite durable
It has fallen over more than 30 times since it was installed, but it still works
View detail
Same etc. performance for half the price of the 90s-2000s, Defferential Gear re here too extreme
Cospa is the best
If it's not a Taper Bar, it's OK with a pong
I'm not a famous manufacturer
Not bad for accuracy?
View detail
Fits: Others
It's cheap, light, and straightforward to take on
I have never installed the Hand guard, and I have never used the Hand guard of Aluminum or I was worried that the Hand guard with a core would be more durable and last longer, but I didn't want it to be heavy And Material:If it is Hand guard etc. of Aluminum, there is no way to install the Grip end part But I can't install it to the Handlebar, so I choose this one
As a result, this was the right choice for me It's light, easy to install, and the Grip end part is made of Material:Because of the Plastic, it bent straight and installed beautifully
The durability is also stronger than I thought it would be, although I've already beaten it a few times with the Enduro
However, the construction of the included Aluminum Collar and Screwetc. is cheap If this gets better, there is nothing to say
But I bought two more afterwards because they were so much better than I expected
View detail
Knuckle guard also suits On road motorcycle
I installed it in the TDM 900 and already love it for about 10 years since I bought it.
The hardest thing about Riding in the cold season is the cold of the limbs. So, I installed a Grip heater on a thick Winter Gloves, and it will be, but when I run on a highway, the degree of cold weather protection is so cold that there is no effect.
I think that wind protection measures are more important than anything to prevent cold in Motorcycle. Recently many ManufacturerOEM's Knuckle guard has been lineuped, but Universal products are not so many.
Also, OEM's Knuckle guard is often undesirable in Design.
Poly sports's Knuckle guard is almost mountable if it is a Pipe Handlebar Motorcycle and design is also Sharp so I think it will fit various Motorcycles.
Although it is not a very large Guard, it is Large enough to hide his hands, and the running wind is surely prevented.
Even if installation is somewhat uneven, because it is universal, I think that if you make delicate adjustments Large I think many things are durable, but if you need to prepare Spacer separately, such as Washer and Color.
Also, when installing this Guard, depending on the shape, I think that OEM's Bar End will be unusable.
Quality has been used for more than 10 years, but there are no cracks, no cracks, no color fading has occurred. I think that it is a Knuckle guard that not only adaptive Motorcycle and MOTARD series but also SportsNAKED suits.
View detail
Fits: Others
Satisfied with price and shape
There is a thing called Universal Product and there is a feeling that I forced it, but I got it somehow. Since it is a SMART shape, it became Sharp feeling and satisfied. Fixation is pretty much a solid. View detail
Fits: Others
Good product. However, attention is required for installation.
The shape is good, the character of polisport is smart. There is sufficient function on the premise that there is no core.
However, it is easy to get scratched because the material is soft. Because it is cheap, it will be good if you wish to buy it.
Attachment is necessary for installation depending on the car model. Or, I guess most car models can not be attached. Us D-TRACKER-X, Handlebar. Zeta. CompPipe Handlebar, motard-mid. OEM. Handlebar around, but various place.. So, I extended it using Homsen Bracket of about 5 cm and wear it. Still Brake hose interferes so slightly changing the handling, still interfering and Brake hose can be trimmed, protected with a Spiral Tube bundling the cord
View detail
Fits: Others
Exchange with Handlebar Tube and Grip and Set
The installation work was done without hesitation. Instruction Manual is somewhat unkind, but it is about 30 minutes together with Grip, HandlebarTube.
The purpose attached was 100% satisfaction with cold weather protection. Winter commuting is like a lie that my fingers hurt and it was Large strange. I should have bought it soon (T ∇ T)
View detail
Fits: Others
For those who understand
Previously we introduced POLISPORT's Hand guard to KDX 125. I introduced it this time because the shape was good for the price. I ordered with BackOrder because the delivery date is one month.
Instruction Manual Paper Paper Quantity : 1pc. Although it was not so complicated structure, I think that it is enough.
However, the center side Clamp has a hole to enter the usual Hexagon Nut and Nut comes with, but I think that it is easier to install this Nut depending on the Handlebar Bend. Even without this Nut, the outside is fixed with Nylon nut + Washer, so it can not be relaxed.
Since Spoiler is just fitting in, it is easy to detach, but branches etc. It seems likely to come off if it hits strongly, so we plan to consider the fixing method at a later date.
In addition, we Lever is changed to DRC Short and is just right Size. There is a possibility that it will be out as NORMALLever.
Because it is a Universal Product, it is for those who can understand the necessity of processing and devising to some extent, but the basic making is good, but still the price is Oak-like product + Alpha level so I like it very much.
View detail