Reviews
Fits: Others
Installed on a WR250R
I bought it to install on my Yamaha WR250R.
I bought the Guard from the company, but I had to use this Adapter to get the ideal fit, so I replaced it with this one.
It was a good installation and it was nice and rigid.
View detail
Fits: Others
Not only is it cheap, it's surprisingly durable
I was worried about the performance because of the price, but it's not a problem at all
I feel like an idiot for having bought an overpriced ZETA until now
I've fallen over 30 times since I put these on and haven't had any problems
View detail
Fits: Others
Not only is it cheap, it's surprisingly durable
I was concerned about the quality of the product because it was very cheap, but it was completely safe
It's perfectly light and quite durable
It has fallen over more than 30 times since it was installed, but it still works
View detail
Frankly
It's mostly plastic, but it's better than nothing and cosmetically better than nothing. I fell over once Lever broke at times, but maybe it just happened to be a bad spot to hit View detail
Same etc. performance for half the price of the 90s-2000s, Defferential Gear re here too extreme
Cospa is the best
If it's not a Taper Bar, it's OK with a pong
I'm not a famous manufacturer
Not bad for accuracy?
View detail
It has a nice, light handlebar feel that the Gold genus Guard doesn't have
? Reason for purchase
When riding off-road on the KTM Free ride 250R, you can put your hands on stepping stones, trees, etc I was looking for a Hand guard to protect me from
The conditions for doing so are There's no core in the genus Gold stuff
In the past, when driving off-road, such as with Enduro, we have had to use the It is equipped with a Hand guard of the type to protect with aluminum or other I did
However, it's only because of the considerable weight of the Gold genus, which makes the Handlebar feel heavier and I was very tired when I was running on the rough terrain where the Handlebar often swung I did
Therefore, this product was chosen because it is light but has a certain degree of protection performance Installed
To prepare for Brake/ClutchLever damage due to a fall, the ARC's unbreakable Lever(Material):Plastic) would not be a problem to install, it was decided that it would be fine
? installation
A normal Pipe Handlebar should be able to be installed with no problem
I used a bolt for Clamp and Handlebar End Therefore, I installed the Pierced Type Grip which has a hole at the end in advance It's easy to leave behind
Depending on the type of vehicle, such as a TRAIL vehicle that has a lot of switches, there may be a Switch box or a MASTER You may need to fine-tune the position, etc
? feeling of use
We were able to achieve both a light handlebar feel and protection at the same time It was
Clearance with Lever etc. is also sufficient for 1 or Quantity:The 2pc finger control felt fine for Space, even with 4 fingers, of course
For Small stones from the car in front and Small branches on the woodland course, etc Protection performance is also adequate
However, unlike the Hand guard made of the Gold genus, it will break in the event of a fall (Lol)
I've seen this product in clean, unbroken condition, as I usually fall down multiple times in one race It was only once ^^^;
I understand that this is just the nature of the product
Well, the price is so low that I had to replace it several times when I reached the limit of the Repair
In general, I'm happy with the cosmetic results and the color of the Orange matches the Frame So I like the OEM PowerParts feel
View detail
Fits: Others
It's too tight for SEROW as it is
When I try to put it on SEROW, Brake line and Wiring interfere with each other
I can't install it in the position I want
So, I used ZETA's Clamp and drilled holes and cut the edges of the products
I was forced to put it on
View detail
Just the right amount of protection
It is just strong enough to fit on a normal 22mm handlebar
The Handlebar side of the aluminum-core Guard is bent when it is hit hard The Handlebar is good for a good feeling even if it hits you No more bending
I've never injured my hand in a race wearing this, so I thought it was a good one It is
View detail
Fits: Others
A shitty product, not a shitty product
I bought it because of the comments that were written about how relatively easy it was to install Do you get it? Level called
When trying to force the wire into place by force, it is not possible to use the Clutch Wire or the Throttle Wire Interference is inevitable To avoid the interference, both Brake and Clutch Lever started to go in a ridiculous direction
I think it looks good, but if it doesn't stick, it doesn't mean anything
Worst, worst, shittiest product ever
Large It's like throwing away your gold
This is a product you should not buy
I know you can't do it, but I dare say it, Gold back!
View detail
It's hard to install, but the finished product looks great
Because it is universal, the size does not match with the size of this product I guess
Quantity:Pair (for Left and Right) Mirror, loosen the Brake Fix the inside first
Because the Nut of the connection part will fall off, it is better to use Vinyl Tape to make it thicker before fitting
If you use the flexibility of plastic and fix it so that it doesn't interfere with Hose, it's completed
It's a white body with red color
View detail
Fits: Others
It's cheap, light, and straightforward to take on
I have never installed the Hand guard, and I have never used the Hand guard of Aluminum or I was worried that the Hand guard with a core would be more durable and last longer, but I didn't want it to be heavy And Material:If it is Hand guard etc. of Aluminum, there is no way to install the Grip end part But I can't install it to the Handlebar, so I choose this one
As a result, this was the right choice for me It's light, easy to install, and the Grip end part is made of Material:Because of the Plastic, it bent straight and installed beautifully
The durability is also stronger than I thought it would be, although I've already beaten it a few times with the Enduro
However, the construction of the included Aluminum Collar and Screwetc. is cheap If this gets better, there is nothing to say
But I bought two more afterwards because they were so much better than I expected
View detail
Other than OEM Knuckle guard
I installed it in DL 1000 V-STROM 650.
Knuckle guard is on sale from SEA BASS with OEMOption, but Design seemed to be unbearable, so purchase Poly sports' Knuckle guard that was also attached to TDM 900 before..
Since it's a big deal, Choose Suzuki yellow according to Body color. I thought it was a bit flashy, but it is a good feeling.
Since the Body has some flexibility in the installation, I installed it while adjusting it well. Because the Clutch lever slightly interfered, I shifted the position of the Holder to the center side by 5?.
As Demerit, when installing this Knuckle guard, the OEM's Handlebar weight needs to be removed. Nonetheless, even if you remove Bar Weight, you can run without any problems.
I have been waiting for a while because the ordering period since ordering is long.
View detail
Cheap and light
Unlike KLX 250 I attached it here without processing
But I forgot to write it with that, but Normal handle does not attach because the hole in the end part is blocked by welding I do not know how far the car is, but at least XR 250 WR 250 KLX 250 KDX 125 was blocked I think that it is difficult if you do not attach outside aluminum Aluminum Handlebar For reference
View detail
Cheap and light, surprisingly strong
Previously I used a gold stuff, but it turned around as it turned gaudy and it hurt Clutch Wire and Brake hose at the inner Clamp and stopped it with another part, etc. It was this part And since the whole is so soft it will not move inside only by turning
At first it was not core Large I thought it was tough but I do not seem to crack well enough But it is safe because the price is cheap even if broken
View detail
I like it very much.
Among Closed type of All resin, overwhelming Cost performance.
There is not much fancy, but the Guard part is made of 1 Parts, so it is harder to break than what is made of 2 Parts.
Material If there is, it will not crack unless it is used quite a bit.
I think Guard strength is necessary and sufficient.
Also, as it is not quite light, it is better not to have any influence on Handling.
If there is one drawback, it can be said to the general resin hand guard, but the sense of fixation is weak and it is easy to twist and turn around.
View detail
There are difficulties in installation, but functionality is enough
【What made you decide the purchase?】 I bought it because I wanted a Guard with SMART shape when protecting hands from flying stones and branches.
【How was it actually used?】 Functionality was enough. Just because the branches hit the fingertips depending on the installation, we have difficulty positioning Wiring and Guard.
【Was it difficult to install? (Hard parts case)】 In my case I cut off the part that corresponds to Wiring. If that is the case, it cracks when it falls, so we attach it with Screw as a subsidiary of the Stainless Steel board.
【Please tell me the point of installation and hang (in the case of Hard parts)】 It is the same as above, but if Wiring inevitably collides, I think it would be better to shred the Guard. Just round off the corner or Wiring will hurt unless you paste the rubber.
[Is there anything I was disappointed about?] I thought that it would be easier to attach, but it was unexpected that Accelerator Wire would hit it.
【Hope for Manufacturer - Please tell me if there are any improvement points】 I think if there is a movie of installation etc.. We also purchased Poly sports products, but the information is for FOR JAPAN MODEL - Often not going out abroad.
【Have you compared items?】 Similar products of ZETAHand guard and Poly sports
[Others] Because it is easier to slip through the trees than Aluminum's hand guard, I purchase such a product. With color with White with falling with White, it will fall, but I do not care because it is not noticeable. Moreover, since it never folds even if it falls, I think that it is not something that will be broken soon.
The color in the case when White became reflected in the 2nd photograph and Screw of the shaved part (Right Side as seen from the front) is.
View detail
Knuckle guard also suits On road motorcycle
I installed it in the TDM 900 and already love it for about 10 years since I bought it.
The hardest thing about Riding in the cold season is the cold of the limbs. So, I installed a Grip heater on a thick Winter Gloves, and it will be, but when I run on a highway, the degree of cold weather protection is so cold that there is no effect.
I think that wind protection measures are more important than anything to prevent cold in Motorcycle. Recently many ManufacturerOEM's Knuckle guard has been lineuped, but Universal products are not so many.
Also, OEM's Knuckle guard is often undesirable in Design.
Poly sports's Knuckle guard is almost mountable if it is a Pipe Handlebar Motorcycle and design is also Sharp so I think it will fit various Motorcycles.
Although it is not a very large Guard, it is Large enough to hide his hands, and the running wind is surely prevented.
Even if installation is somewhat uneven, because it is universal, I think that if you make delicate adjustments Large I think many things are durable, but if you need to prepare Spacer separately, such as Washer and Color.
Also, when installing this Guard, depending on the shape, I think that OEM's Bar End will be unusable.
Quality has been used for more than 10 years, but there are no cracks, no cracks, no color fading has occurred. I think that it is a Knuckle guard that not only adaptive Motorcycle and MOTARD series but also SportsNAKED suits.
View detail
Installation on dTRACKER 125 requires modification
dTRACKER 125, Olm Handlebar of Klx 125. Brake side is attached without problems. On the Clutch side, Quantity : Pair (for Left and Right) Hitoshi etc. , It is necessary to cut the welding part of BrakeHose Holder diagonally with the Grinder and also to cut off the Clamp part of this product. Once attached, you are firm and bush will fully protect Lever. Because it is a shiny material, I think that there is no problem in terms of strength. Bar EndOpen Type you can install it cheaply on the OEMHandlebar. View detail
Fits: Others
Satisfied with price and shape
There is a thing called Universal Product and there is a feeling that I forced it, but I got it somehow. Since it is a SMART shape, it became Sharp feeling and satisfied. Fixation is pretty much a solid. View detail
Fits: Others
Depending on ingenuity
It is the same color as Orange color of KTM, shape is also SMART, low price is good.
As for installation, it is a Universal Product, which is close to the direct attachment of Bracket, so I think that there are few cars that can be attached.
Since it is not Cover which was originally Firmly, I think that it is not inferior to installing an appropriate Bracket.
Flap to enlarge the area is attached, but installation is only fitting.
Although it does not come off in the normal running position, I think that it will fly easily if it receives a direct shock, if you are worried it would be better to open a hole and Tie Wrap.
I think that it is a product that has room to devise and labor, so we can not recommend it easily, but I think that it is a good product for those who can enjoy it.
View detail