Reviews
That's good. That's good!
Fitted with no problem!
I think it's usually good.
View detail
Fits: KTM 150XC, KTM 125EXC, KTM 105SX, HUSQVARNA TE250, HUSQVARNA TE125, HUSQVARNA TC250, HUSQVARNA TC125, HUSQVARNA FE450, HUSQVARNA FE350, HUSQVARNA FC450, HUSQVARNA FE250, HUSQVARNA FC350, HUSQVARNA FC250, KTM 250EXC, KTM 250EXC-F, KTM 500EXC, KTM SX-F450, KTM SX-F250, KTM SX125, KTM SX150
It could be installed on GASGAS.
I was able to install it on my EC250 (2021) without any problems. View detail
Small processing is required for use with 22FX
This is for those who are hesitant to purchase the product because the conformity after 20 has not been disclosed.
19 for 250F can be installed.
Clutch cover and IgnitionCover can be used as is.
As for the frame cover, however, the clearance between the frame and STAND bracket is narrow, and I had to shave a little to get it to fit.
The Material itself is quite sticky, so it would be difficult to process with File. In this case, we processed it with Belt Thunder.
I hope that the lack of information on FX support after 20 will be remedied.
View detail
Fits: GASGAS EC350F, GASGAS EC250F, GASGAS EC300, GASGAS EC250
Sticks as well as OEMs.
Shape and mounting hole position are the same as OEM.
Durability is a little harder resin than OEM, so it is easy to crack.
View detail
Fits: YAMAHA WR 250F, YAMAHA WR 450F, YAMAHA YZ 125, YAMAHA YZ 250
Easy installation
Is Guard important?
Fitting Yoshi?
View detail
OEM same etc.
I bought it because it is a little cheaper than OEM.
The product was installed with no modifications and the quality is good.
View detail
Light weight around Light
I purchased this product to save weight and appearance because the OEM headlight surround was cracked.
The installation method has been posted on other sites, so even an amateur could install it without any problems.
As intended, it has reduced the weight, but as a function of the Light, it is better than nothing. The beam coverage is narrow, and we do not recommend driving at night.
View detail
Mounts more securely than expected.
Installed on klx230.
OEMHeadlight is bright and nice, but I'm still disappointed in its appearance…
That is why I purchased this one.
The installation is almost a simple installation.
I was concerned about the brightness, but perhaps because I had originally replaced the bulbs with LED bulbs, I do not have the impression that the bulbs have become that dark.
The top part of the bracket was attached with a rubber bush to the extra hole in the Headlight Bracket on the body side, instead of the Elastic band that comes with the bracket, so the bracket does not move up and down due to vibration.
Handling is also lighter and very recommendation.
View detail
Good to use, necessary and sufficient
I installed it on my yz125x. I was hesitant to install ACERBIS because of its thickness and price.
This is a simple design, but I bought it because of the price and because it seems to be less affected by the thickness. I don't mind the shaving.
I think it's a good thing that I don't have it because I can work without removing the guard when I remove the seat frame for maintenance. I like it!
View detail
![[Repair Parts] Plastic Mount Kit](https://img.webike-cdn.net/catalogue/images/12302/8307400002_TS.jpg)
Hand guard parts
I never expected to find the Poly sports hand guard repair parts I was looking for on Webike.
I was thrilled because I had given up halfway through.
View detail
Fits: BETA RR 480, BETA RR 350, BETA RR 250, BETA RR 300
It protects the Swing Arm from rocks.
Installed because I hit the Swing Arm at a rocky area. I had to cut it down a little because it interfered with the external brake pedal. View detail
Fits: BETA X-TRAINER 300, BETA RR250 2T, BETA RR300 2T
Before cracking the Case.
Installation is easy and not difficult. It protects the Case from falls and stones. View detail
โอเคครับ สวยได้ของตามสั่ง View detail
ได้ของตรงตามที่สั่ง รอของไม่นาน View detail
Fits: BETA RR350 4T, BETA RR300 2T, BETA RR250 2T, BETA RR125 2T, BETA RR480 4T, BETA RR430 4T, BETA RR390 4T, BETA RR200 2T, BETA X-TRAINER250, BETA X-TRAINER300
Easy to install
The fitting is good and it goes on easily. View detail
Fits: BETA RR 250, BETA RR 300, BETA RR 350, BETA RR 400, BETA RR 450
Cheap and reviving
The fitting is good and for the price it is a good product, although some parts are a bit crudely made.
Decal Kit can also be applied normally and has the effect of improving the appearance.
View detail
BETA RR2T
Purchased because the exterior of my BETARR2T was scratched up.
Rear area is the same shape as 13~, and SIDE, shroud, and front area are the same shape after 20 years.
View detail
Installation is the key.
The ribs need to be bent extra tightly before installation so that they will not stick to the chamber.
I chose Orange to match the color of my car, but I regret that Black would have looked better with Parenthesis.
View detail
In MOTARDFender, best recommended
[How is it used?
Installation Type:D Tracker
Traveling:Touring, mountain passes
Replaced another company's MOTARDFender. Used for about 4 years after replacement.
Was the one you received as per Image?
It's just like the image. I've been using it for a few years now, and I'm very happy with it.
Was the installation difficult?
This product has holes drilled from the start, and its unique hole alignment system makes it easy to install, not only for the D Tracker but for a wide range of car models.
For mounting angle adjustment, a washer was used.
How was your experience with it?
The style is large and strange, and I've used about three social Fenders, but this is the one with the best parenthesis appearance.
The D Tracker has a large Radiator area, so I didn't feel much benefit from it, but I can easily see it becoming a Plus.
I also felt that it was cosmetically sound and would be easy to replace if damaged.
[Included Parts:were they on?
See product description.
[Was there anything that disappointed you?
None
Point and hang of installation
When installing an external fender, it is recommended to use a stainless washer of size M8 and above to adjust the final installation position. This will allow you to adjust the installation angle to avoid slight interference with the frame.
When I introduced the external Fender, I was adjusting everything with Washer.
For the washer, it is easier to use Aron Alpha's instant adhesives to align the holes and temporarily attach the washer.
View detail
Installed on KLX250.
I'm very happy with the large size and the mud splatter is reduced. View detail