Reviews
Bolt hole cracked.
[How is it used?
Installed to prevent oil leakage at Circuit
Was the one you received as per Image?
Street Image
Was the installation difficult?
There was no Instruction Manual, and at first I did not understand what the bracket in the Included Parts:section was for. After installation, I found out that the bracket was to be installed by lowering the cowl to avoid the exhaust pipe.
Installation is not that difficult.
How was your experience with it?
As shown in the photo, the Bolt mounting holes on the Cowl were cracked after only a few runs, whether due to poor installation or slightly poor product dimensions.
However, it may be unavoidable in a sense, since Grom is a Machine with very high vibration.
[Included Parts:were they on?
Bolt、Bracket Only。
[Was there anything that disappointed you?
Cracking. In the meantime, it did not become a fatal Damage, so it is usable.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Tightening the bolt a little bit at a time is recommended, as tightening the bolt too much may cause the cowl to crack. Also, I would like to see an Instruction Manual.
View detail
Some difficulty in installation
[How is it used?
Circuit's Sports driving
Was the one you received as per Image?
As per Image… I thought.
Was the installation difficult?
The hole position was not sober and needed to be fine-tuned with a stick File.
How was your experience with it?
Perfect! It was very Race ish.
[Included Parts:were they on?
Only Cowl to begin with.
[Was there anything that disappointed you?
I knew I wanted the hole to be in the exact position.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
If you are going to Race, you will also need a number seal.
View detail
Number Seal Cowl。
I bought it for Circuit, and I like the sharp feeling than Cowl of HRC Grom.
However, although it is White Gel Finishing, it is not a very beautiful finish, so it needs a certain finishing treatment.
(If you don't mind, it's perfectly fine.)
View detail
Fits: HONDA Grom(MSX125), HONDA Grom(MSX125)
It's a sturdy structure
If you try to attach it with the Screw of OEM, you can use it with the Cowl You need to put something between the frames, but that's just the way the groms are constructed I use the rubber packing which I drilled a hole in between the frames View detail
Fits: HONDA Grom(MSX125), HONDA Grom(MSX125)
Even though it is an exclusive product, ingenuity is necessary
I think only to remove the OEM and install it
We had to fill the space with Aluminum Collar etc..
Included Parts because it is drilled : I wanted you to put it in, so the evaluation is low.
Odd so I can fulfill the purpose
View detail