Reviews
Gasket
Not yet used for SeasonOff View detail
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350
Exchange from OEM
I am satisfied with the cleanliness!
I like the replacement from OEM and the various Parts that are available!
View detail
Fits: YAMAHA RZ250, YAMAHA RZ250R, YAMAHA RZ350, YAMAHA RZ350R, YAMAHA RZ250, YAMAHA RZ250R, YAMAHA RZ350, YAMAHA RZ350R
At the time of Chamber replacement
I don't know how long it took to replace the Chamber, so I replaced it together with the Chamber. View detail
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350
Purchased as a spare
I bought it as a spare and I think it will work as well as OEM since it is two-way.
The cheapest one only had one place to connect the Hose, so I went with this one!
View detail
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350
In reserve.
I think it is good that the length is adjustable! View detail
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250
There were some disappointments.
When I adjusted the mirror, the paint or vinyl resin around the round mounting area on the reverse side was peeling off and the surface was peeling off. The paint or vinyl resin around the round mounting area on the reverse side was peeling off and the surface was peeling. (Gold genus) The "I" was exposed. Other than that, there were no problems, which is a little disappointing. View detail
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350
Painting difficulty
The accuracy of the object is Material:It's positioned so well that it's incomparable to FRP. It fits the body so well that there is no need to rework it. However, cracks appeared in the paint film and the finish was terrible. The paint is very difficult to apply due to the material. I think the finish of the product itself is very good. View detail
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250
Commendation because of its high quality and reasonable price as a Reproduct.
In the case of RZ350 and RZ250, OEMMirror is missing and has been resold for a high price on OaktionSite, so it is a good alternative to OEMMirror for installation. I am really glad that RiproMirror is now available from Zess. However, I would like to ask Zes to inspect the Mirror carefully before shipping, because there are two patterns, Normal Thread Screw and Opposite Thread Screw, and the Mirror may be loose depending on the item. View detail
It can be used without problems
Gasket around the Engine is all Quantity:Set
The durability of the paper-based Gasket material is unknown because it is different from OEM, but no leaks have been observed to date.
It is good for Eg full overhaul, but since it also includes a Gasket for the Thermostat section, there may be Gaskets that are not used in some cases.
However, if you need Head Gasket and other Gaskets, it is definitely a very good value.
View detail
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350
Paint peels off easily.
Since the paint was applied as is without any surface preparation, the paint was easily removed with only minor adjustments to Lever and Switch.
I have experience with several Handlebars from Other Brand Product, but I have never seen such a weak paint job.
PositionOthers is NORMAL compliant, so there is no problem.
View detail
Fits: YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250
I'm just thankful for Ripro.
The sutra was a little small for my Euzo Chamber, so I could not put it in easily.
GizaGiza push marks of the vendor can be seen in the light.
I thought it would be a Level that would bother me once it was attached...
We can be thankful we have Ripro.
View detail
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350
OEMHarness Comparison
Due to OEM deterioration, it will be replaced in the future.
We checked side by side with OEMHarness.
Wiring color was almost the same as OEM, with some color shade differences.
It is a Level that is not a problem.
Wiring thickness was thin in some areas.
Coupler is also OEM same etc.
The lack of Protective Tube around the Neck was disappointing.
I am thinking of it as a HarnessBase, and am working on reinforcing it and reattaching the coupler in my own way.
It is better to check terminals and couplers visually or by pulling them.
Good
Manufacturer of high quality products with high prices.
Since the Harness supply is no longer available from the
I had to purchase this product in a hurry, but overall
I'm glad I bought it
I appreciate the Large change to Replace discontinued items.
View detail
Fits: YAMAHA RZ250, YAMAHA RZ350
Front floats when the power band is in!
Purchased 2 years ago - finally installed it the other day.
The carburetor is PWK28.
The power band that starts at 6,000 rpm in the case of the Normal muffler moderates to 8,000 rpm, and from there on up, the Image spins but does not have a sense of power.
After replacing with Chamber, the power feeling continues up to 10,500 rpm, and in 1st and 2nd gear, the front tire loses ground contact when entering the power band.
Air cleaner is still OEM and pig nose is still intact. So far, low speed Torque has not dropped either.
Well, really, Chamber is a terrible thing!
View detail
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350
Standard Type
I was looking for an OEMHandlebar from RZ, and although it is not OEM, I was able to find one at an affordable price. I also decided to buy it here because of the free shipping when purchased as a Single Item compared to OaktionSite. View detail
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350
Covers surface rough, although it is assumed to be painted.
Purchased for painting. It is a little wide. View detail
Fits: YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250
No different than OEMCowl, but EXACTLY as addictive.
Bought this to paint. since it is Ripro, I was worried about it so I did a temporary install before painting. Satisfied with the product. View detail
Fits: YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250
The construction is solid.
Bought this to paint. since it is Ripro, I was worried about it so I did a temporary install before painting. Satisfied with the product. View detail
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250
Very good but not perfect, paint could be better and they should adjust more
About quality and texture - the stems are thick and much better than usual copy mirrors, but the paint is not great and there were a few chips and marks on my set. They do not adjust in all angles and i dont want to break them by forcing them to do so. About the feeling of use - One side is very firm and tight to move the mirror and the other is looser, the website says not to adjust the screws so I think i am stuck wituh this and it is not ideal but the mirrors are all about the original look and not actual use as a mirror i think. They do have the original look which is great. Products to buy together - none that i can think of. Difficulty of installation - easy, like original if you have left theead right right mirror. Cost performance and comparison with other products - i think the price is fair for a copy of a rare and NLA mirror with this quality. About shipping and packaging - arrived ok but the original packing did not have any bubble wrap and the thin paint needs it. Any concerns, cautions, or advice when purchasing - these are not great for use as mirrors but they do give you the look of the original bike which is what i wanted. View detail
Fits: YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250
A great product
About quality and texture - This an axact copy of the original LC tank and its fits correctly. One thing to note, In the photos the primer is white, but it is grey now. About the feeling of use - The lines are sharp and well formed and it follows the original faithfully. Products to buy together - side panels, tail and front mudguard. Difficulty of installation - easy, fits like the original. Easily painted and looks great when fitted. Cost performance and comparison with other products - there is nothing else like this, it is the only one, but the cost is fair for the quality. About shipping and packaging - no damage in shipping so I would say well wrapped. Any concerns, cautions, or advice when purchasing - no concerns, its a great product. If you need a new tank its a great option. View detail
Almost perfect and great for the price
Quality and texture are very good. There are some imperfectly defined areas (like around the grab rail bosses) and the finishing is not perfect so it could do with some filing/sanding before you paint it, bit you would do that anyway I think. So while it is not 100% as nice as an original panel it has to be said that for the price its much better than an old brittle original panel. About the feeling of use - Easy to paint and no cracking like old 80s plastic. Fits well to the bike. Products to buy together - buy the side panels as well. Difficulty of installation - really easy to fit, all the holes line up well. Make sure to add some collars for teh grab rail holes. Cost performance and comparison with other products - in comparison to an original part this is less than half the price so gets my vote. I have bought a few of these. About shipping and packaging - Shipping was fast and it was well packed in bubblewrap in a box. Any concerns, cautions, or advice when purchasing - The only thing i wish this part had was the small steel collars in the grab rail holes. If you dont make and add these you will crush and crack the plastic when you tighten the grab rail. The original Yamaha part had those fitted. View detail