Reviews
Fits: KAWASAKI Z750, KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750, KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR)
Nice, not too naughty
I was looking for a YB aperture and after comparing and contrasting, I bought it.
Not too naughty for z900rs, Large person squeeze.
Both city driving and Touring have become easier.
The only thing is that the Plating Process does not produce any color.
At least give us Black color as well.
View detail
Fits: KAWASAKI Z750, KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750, KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR)
YB aperture looks good.
The aperture of this product fits CB1000SF.
I used another one that was still narrowed down, but the handling etc. was not so good.
View detail
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250
There were some disappointments.
When I adjusted the mirror, the paint or vinyl resin around the round mounting area on the reverse side was peeling off and the surface was peeling off. The paint or vinyl resin around the round mounting area on the reverse side was peeling off and the surface was peeling. (Gold genus) The "I" was exposed. Other than that, there were no problems, which is a little disappointing. View detail
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250
Commendation because of its high quality and reasonable price as a Reproduct.
In the case of RZ350 and RZ250, OEMMirror is missing and has been resold for a high price on OaktionSite, so it is a good alternative to OEMMirror for installation. I am really glad that RiproMirror is now available from Zess. However, I would like to ask Zes to inspect the Mirror carefully before shipping, because there are two patterns, Normal Thread Screw and Opposite Thread Screw, and the Mirror may be loose depending on the item. View detail
Fits: KAWASAKI Z750, KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750, KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR)
Nice aperture.
It's nice and well squeezed. View detail
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350
Paint peels off easily.
Since the paint was applied as is without any surface preparation, the paint was easily removed with only minor adjustments to Lever and Switch.
I have experience with several Handlebars from Other Brand Product, but I have never seen such a weak paint job.
PositionOthers is NORMAL compliant, so there is no problem.
View detail
Fits: KAWASAKI Z750, KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750, KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR)
Replace in preparation for long touring
I had a hard time doing long tours with the OEM handlebar, so I chose this one. So I chose this one. 400km over touring was no problem. View detail
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350
Standard Type
I was looking for an OEMHandlebar from RZ, and although it is not OEM, I was able to find one at an affordable price. I also decided to buy it here because of the free shipping when purchased as a Single Item compared to OaktionSite. View detail
Fits: KAWASAKI Z750, KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750, KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR)
Maybe?
The PMS YB was not good enough, so I replaced it.
The construction is fine, and above all, the positioning is easy.
The price is less than half the price of PMS, and this is definitely better.
View detail
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250
Very good but not perfect, paint could be better and they should adjust more
About quality and texture - the stems are thick and much better than usual copy mirrors, but the paint is not great and there were a few chips and marks on my set. They do not adjust in all angles and i dont want to break them by forcing them to do so. About the feeling of use - One side is very firm and tight to move the mirror and the other is looser, the website says not to adjust the screws so I think i am stuck wituh this and it is not ideal but the mirrors are all about the original look and not actual use as a mirror i think. They do have the original look which is great. Products to buy together - none that i can think of. Difficulty of installation - easy, like original if you have left theead right right mirror. Cost performance and comparison with other products - i think the price is fair for a copy of a rare and NLA mirror with this quality. About shipping and packaging - arrived ok but the original packing did not have any bubble wrap and the thin paint needs it. Any concerns, cautions, or advice when purchasing - these are not great for use as mirrors but they do give you the look of the original bike which is what i wanted. View detail
Mirror for RZ (Mizuno Motor)
I bought the Right Side Reverse Thread Type, but the part that adjusts the angle of the Mirror is loose, and it easily changes direction while driving. It is not practical. I have requested to return it.
The other one I bought had a rattle in the attachment between the MirrorBody and the shaft, which also vibrated while driving, making it impractical.
There is a 66% chance of defective products.
It is the epitome of "cheap" and "bad".
View detail
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350
I put STD Type Handlebar Mount Polishing for ZES RZ250.
The Handlebar was damaged by a fall and I bought this to repair it.
OEMParts are still available, but they were over 10,000 yen, so I went through them.
In Universal, I thought about the cheap Made by HURRICANE, but the details of Handlebar were hard to understand and there was uneasiness of interference etc., so I chose this Manufacturer which is famous for Restore parts of RZ.
It was painted in frosted Black and had a nice texture.
I couldn't compare it with NORMAL, but Position was almost the same as before, no problem.
It was not a problem because it was the part which was hidden by Switchetc. though the place where Garbage seemed to be attached when painting partly was seen.
View detail
Fits: KAWASAKI Z750, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1, KAWASAKI Z750, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1
easy to ride
I think it's an easy Handlebar to ride, although I think you'll have a preference.
The height of the aperture and the low profile make it easy to maneuver the motorcycle and it looks good.
If you're tired of the squeezing Handlebar or the high Handlebar Up Type, I'd recommend it.
View detail
Fits: KAWASAKI Z750, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1, KAWASAKI Z750, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1
The price is somewhat high, but goods that can be relieved.
I think that it is a good product that is very good in shape, strength, finish of details. I am relieved and I am very happy. The atmosphere of the car model is not damaged. View detail