Reviews
It can be used with good accuracy
That's JamesGasket
Accuracy was perfect and it was installed perfectly
Of course, there are no Oil leaks
The price is inexpensive and I will be purchasing this one in the future
View detail
It can be used for the same as OEM, etc
That's JamesGasket
Accuracy was perfect and it was installed perfectly
Of course, there are no Oil leaks
It's a reliable brand that can be used for the same as OEMs, etc., so it's safe for your mental health
View detail
Fits: HARLEY-DAVIDSON SPORTSTER Family
Excellent accuracy!
That's JamesGasket
Accuracy was perfect and it was installed perfectly
Of course, there are no Oil leaks
I feel that using this one is better than buying an OEM
View detail
Very inexpensive
It is used in Repeat
The OEM Products are not likely to be the same in price as the fluorine-based Rubber, but It's not a problem, as it's something you change every timing of an oil change
The costumes are very high
View detail
No different from OEMs, good value for money!
Buell's Oil drain (Engine、GEAR) The OEM product is quite expensive, so I was looking for a cheap one I also considered packing of the same size that is sold in the home center, but the heat and oil resistance It's hard to find the right one for you, so I've been to motorcycle shops, car shops, and tool shops I found this one and am using it while I can't find the same size in the I think the price is about 1/10th of the OEM On exchange (Used for about a year.) I think it's a good product, and there's hardly any deterioration It's a waste of money to order this one, so I try to buy a lot of them in combination with something else It is View detail
Used in Shovel late model
It's very difficult to fit, probably because the outside is made of steel It might have been better if I had a special tool for this, but
The first one failed because it went in at an angle or something when I hammered it in with the appropriate PVC Pipe tube... in two somehow
I was able to hammer it in and it was wasted for one I don't seem to have any issues with oil leaks or anything else since I installed it
View detail
It works fine
Repeat Purchase
I use it in conjunction with wrapping TeflonTape around the Drain bolt 。 Seal performance is fine, although it may be tattered after use
The mileage is about 2000km
View detail
Cospar good
Harley FXDFXDWG made in 1999 We use it every time when we exchange Engine oil, Gear oil, Primary Chain Oil of DYNA WIDE GLIDE. Oil There was never leak, CostPuff oman is good, so I do not know how long I can keep on but I will continue to use it in the future. View detail
The accuracy was bad and we had to change it
Accuracy is bad (Large Yu) I was able to replace it, but the replacement item could not be mounted too loud.
I proved that I can not pick up movies and returned it.
Since there was not such a thing in the past, after all I attached the Gasket of Plate type.
Sorry for the price, it is cheap.
I think that the correspondence of webike at this time was perfect.
As a cause of Rubber 's large Large, the following may have changed, and in some cases it is presumed that it affects quality.
- When I updated the Gold type I got a big Large.
- For high productivity, I made high Cycle molding. If the amount of raw material is the same, curing will be sweet and compression set will decrease, so long term reliability will be lowered.
- Due to some reason, raw materials themselves increased.
View detail
Fits: HARLEY-DAVIDSON FLSeries, HARLEY-DAVIDSON FLHSeries, HARLEY-DAVIDSON SPORTSTER Family
Ideal for Solenoid's Gasket
Solenoid's Gasket seems to have two kinds of Sponge with Seal and Rubber ring Gasket. At first, I used Sponge type
Reuse is not possible once attached once. Also, Seal's mount was not peeled off in a few years, etc.. Since there is no extra Seal here in Rubber
I'm using this as myself because I can fix it properly using liquid Gasket.
View detail
Fits: HARLEY-DAVIDSON 3 hole Derby coverMODEL
Reliable JamesGasket
Again James' Gasket can be trusted.
Primary Cover's accuracy is bad, and Oil occasionally leaked out.
After exchanging the Gasket, the leak stopped.
View detail
OEM and same etc. Can use it!
I purchased Harley's TransOil for exchange.
OEM is very expensive...
I bought it because it was cheaper compared to it, but it can be used normally.
Oil There is no leakage, same as OEM etc. I think that it is good to think.
View detail
Fits: HARLEY-DAVIDSON XL SPORTSTER, HARLEY-DAVIDSON XL SPORTSTER 91-94 (StarterHousingScrew), HARLEY-DAVIDSON FL 85-96 (Air-conditioner trawlSolenoidLower)
OEM and same etc. It is goods!
TransOil I bought it for exchange.
Small Sana Parts, OEM is expensive.
I bought it because it was cheaper compared to it, but it can be used normally.
OEM and same etc. I think that it is good to think.
View detail
Engine oil is essential for replacing items!
I purchased Harley's Engine oil for replacement.
Small Sana Parts, OEM is very expensive...
I bought it because it was cheaper compared to it, but it can be used normally.
Oil There is no leakage, same as OEM etc. I think that it is good to think.
View detail
Because it is necessary
It is attached to Drain bolt by exchange of Transmission oil. Since it is necessary to exchange every time, do not forget to replace. O-ring has the role of Packing. If it is crushed or broken it will cause Oil leakage. View detail
Even though it is cheap, there is no problem in performance
Oil For each replacement, we are exchanging with this new O-ring. There seems to be a way to wind water leakage prevention Tape on the Drain bolt, but we do not have Oil leaks only with this O-ring. View detail
OEM and same etc. There is no problem with goods!
I bought it for replacing Locker Cover.
I tried to purchase an OEM Product, but I was surprised at Gasket because it was quite expensive!
So I bought a reliable JamesGasket.
Of course, OEM and the like. There is no problem at all with goods.
I think that it is better to purchase here if you buy OEM Product.
View detail
OEM and same etc. Good with good!
I bought it for replacing Locker Cover.
I was trying to purchase an OEM Product, but it was quite expensive at Gasket and Big Li!
So I bought a reliable JamesGasket.
Of course, OEM and the like. There is no problem at all with goods.
I think that it is better to purchase here if you buy OEM Product.
View detail
I purchased it as a spare part of Buell.
I learned that the set of Stud bolt puller of Inch size is handled by Webike and bought this Bolt as well. (*^^*)
Exchange is undecided, but I am relieved because I can cope with unexpected Stud bolt break.
Webike was able to purchase with Set, so it was really saved. (*^^*)
View detail
I am using it for Buell X1.
I can also use it for my Buell, so I use it several times. (*^^*)
I think that it is more secure with Silicon 's bead? I think that Large is durable because there is nothing wrong with it in particular.
For Trouble around the unexpected Primary, I try to have one on hand.
Large It is recommended because it is cheap..
View detail