Reviews
Outstanding Effectiveness! Gicky resolution!
[How is it used?
I was uncomfortable with the jittery feeling when driving at slow speeds, such as in traffic jams, so I wondered if the jitteriness could be eliminated by setting the secondary deceleration to Long. I decided to replace the system in the hope that the jittery feeling would be eliminated by setting the secondary deceleration to Long.
Was the one you received as per Image?
This is a Race ish Sprocket that has been machined with holes to reduce weight.
Was the installation difficult?
The Bolt that holds the Sprocket in place does not require an Impact Driver to remove it. It is held in place by two regular 6mm bolts, which can be worked with a ratchet wrench. The OEM Chain LINK number is 112, but if it is a combination of 16T and 42T, even 110 will be enough. The OEM chain has 112 links, but the combination of 16T and 42T seems to be sturdy even with 110 links.
How was your experience with it?
Since the front was set to 16T and the rear to 42T (OEM was 15T and 45T), the reduction ratio changed from 3.00 of OEM to 2.625, which is a much longer setting. I was worried that the low-speed Torque would weaken when starting from Zero, but this was not the case at all! It is so easy to drive without any stress. As a by-product, the fuel consumption has been remarkably increased to around 35 km/liter, which is a very good thing in these days of high gasoline prices! The Rear Sprocket is a JTSprocket part number JTR890.42ZBK. Unfortunately, this Sprocket is not available at Webig.
[Included Parts:were they on?
Nothing.
[Was there anything that disappointed you?
If I had to say something, it would be the price. A typical Japanese-made product can be bought for around 3,000 yen. (This product is made in the U.K.).
View detail
Fits: HONDA VTR1000, HONDA VTR1000, HONDA CBR954 RR, HONDA CBR929 RR, HONDA CBR650, HONDA CBR900 RR, HONDA CBR600 RR, HONDA CBR600 RR, HONDA CBR600 F4I, HONDA CBR1000 RR, HONDA CBR1000 RR, HONDA CBR1000 RR, HONDA CBR1000 RR, HONDA CB900 (919), HONDA CBR600 F4
This was the only 14T available.
I installed it on a 2011 CBR1000RR.
I was a little worried because it was made by Driven, a manufacturer I was not familiar with, but I was able to install and use it without any problem at all. I recommend this product to those who are looking for a niche size.
View detail
Fits: APRILIA Falco 1000 00-04, APRILIA RSV1000 Mille R Factory 05-09, APRILIA RSV1000 Mille R, APRILIA RSV1000 Mille SP, APRILIA RSV4 11-12, APRILIA RSV4 10, APRILIA RSV4 13-15, APRILIA RSV4 16, APRILIA Tuono 1000 04-10, APRILIA Tuono 1000 R 04-10, APRILIA RSV1000 Mille R 05-09
sufficient for one's needs
Durability is unknown as it was just replaced.
Parts that are fine if there are no defects.
We lowered it one notch from the model standard value and set it at 16. This is working as expected, as we are able to reduce the number of half-crakes during startup and low-speed driving.
View detail
Fits: KTM RC 8 1190 08 525 108 17 16-17, KTM 990 Superduke 05-07 525 17 16-17, KTM 950-990 Adventure 05-08 525 17 16-17, KTM 950 LC 8 SMR 08 525 17 16-17
Purchased for KTM1290SDR
NORMAL Drive17T?Driven38 guns are too long. 300 km/h at 9,500 rpm Since the 6th gear is not usable at all, I changed the Drive side to 16T, which can be replaced without changing the number of Chain Piece this time. Now the maximum speed at 9,500 rpm is 282 km/h in theory. I think that SDR riders should definitely replace these parts. View detail
Fits: SUZUKI DR 350 91-93 520 110 14 12-14, SUZUKI DR 350SE 96-98 520 108 15 12-14, SUZUKI DRZ 400E 00-04 520 112 14 12-16, SUZUKI DRZ 400S 00-04 520 112 15 12-16, SUZUKI DRZ 400SM 05-08 520 110 15 12-16, SUZUKI RMX 250 89-90 520 114 13 12-14, SUZUKI RMX 250 91-01 520 114 13 12-14, SUZUKI DR 350SE 94-95 520 108 15 12-14, SUZUKI DR 350R 94-99 520 110 15 12-14
It can be diverted without any problem.
This is a diversion to DF200 DJEBEL.
The standard FrontSprocket of the DF200 DJEBEL is 15T, but
Driving at 80 km/h cruise, the Engine RPMs will be higher and
Stress was felt.
So I looked for one up 16T, but there was no setting.
Only ZAM was Released for SX200.
DJEBEL is the successor to DJEBEL, so it has not been confirmed as compatible. "Maybe it will stick." I decided to purchase the product, but had to give up because of the undecided delivery date.
I found this product when I was in this situation, and although the DF200 DJEBEL was not compatible. "Maybe it will stick." and decided to buy it.
The results were diverted without any problems.
The DF125 DJEBEL can be used with no problem by converting the rear sprocket to DF200 DJEBEL and the chain to 520 size.
View detail
Used for RVF400
Used for RVF400. I looked for a lot of things and this was the only one I could find. View detail
Change to Acceleration Spec.
I was looking for a Front sprocket for STREET TRIPLE, which I usually use.
I was looking for something a little bit smaller than the NORMAL to give it a little bit more acceleration, but the Japanese Large Hands Manufacturer didn't have it or didn't have it in their lineup, so I ended up with the Sprocket from an overseas brand called Driven. The delivery time was about a week and it was very helpful!
View detail
Fits: DUCATI Panigale 899 14-15, DUCATI Panigale 959 16, DUCATI 1299 Panigale 15-16 (520 Conversion), DUCATI 1199 Panigale 12-14 (520 Conversion)
You want it without the meat?
This is probably the only Panigale front sprocket that has been cut out.
Believing that even the smallest amount of dust can add up to a mountain.
View detail
Fits: APRILIA RSV4 10 (520 Conversion), APRILIA RSV1000 Mille R 98-04 (520 Conversion), APRILIA RSV1000 Mille SP 98-04 (520 Conversion), APRILIA RSV1000 Mille R Factory 05-09 (520 Conversion), APRILIA Falco 1000 00-04 (520 Conversion), APRILIA RSV1000 Mille R 05-09 (520 Conversion), APRILIA RSV4 11-12 (520 Conversion), APRILIA Tuono 1000 R 04-10 (520 Conversion), APRILIA Tuono 1000 04-10 (520 Conversion)
Stable Driven
I bought it for adjustment
The texture is as good as Driven
The price is also quite cheap, so it is good to keep it for setting, but
It's Demerit that the delivery time is long because it's made overseas
View detail