Reviews
All I wanted was Pilot Jet.
It was good until I installed the carburetor of AF34LIVE DIO on AF24TACT, but I could not decide the setting at all, and I wanted to squeeze fuel by Pilot Jet, but there was only Oversize, and I was using the common Pilot Jet with this car model. I looked up DREAM50 and found this product. I wanted to use only Pilot Jet, but I was so desperate that I bought this kit because Rose sales were not available. I think it's not profitable to sell Rose, so I don't think it can be helped. As for the setting, the Pilot area seems to be OK, but the Others area seems to be OK. (Main?) The company is struggling at the View detail
Fits: YAMAHA FZ750
Used in Maintenance
Almost the same product as OEM Parts, but the shape of some of the float packing is different. (Possibility of difference in year etc.?) View detail
Fits: HONDA NSR250R, HONDA NSR250R
Carburetor setting
It is a very old carburetor, so it is used for overhaul and setting.
Complete set Quantity:Set and is good for replacement and readjustment.
It is a good product at a better price than Single Item purchases.
View detail
Fits: HONDA NSR250R, HONDA NSR250R
Maintenance
When the carburetor is overhauled, it is replaced with a new one.
If you want to purchase a single item from HondaOEM Product, please click here for the quantity.:It is helpful that the Set purchase seems to be complete and inexpensive.
View detail
Fits: YAMAHA FZ750
Almost good
Gasket shape of Float chamber is different from OEM and cannot be used. (The unnecessary curvature makes it impossible to maneuver.)
1.Washer, which is the seat gold of the main nozzle, is a different material from that of the OEM. (Durability seems to be no problem)
This is the only concern, and a brief comparison seems to indicate that it can be used normally.
First of all, thanks to the fact that Ripro is available in its entirety at this price.
Since this is before the test run, we do not know what will actually happen, but since we have experienced in the past repairs that the key star can be used normally, it is likely that it will be Large sturdy.
View detail
Maintenance, for adjustment.
The carburetor is not in good shape, so I decided to purchase this complete set of carburetors for maintenance and adjustment rather than purchasing a single item.
L/R, so if you buy both, it will cost you a little bit more.:I was wondering if having a Set would be good for anything.
Next time I plan to use it and only purchase replenishment for shortages.
View detail
Adjustment
Carburetor seems to be in bad shape and I thought it might need maintenance, cleaning and reconditioning.
Complete set Quantity:Set, because it is in a Case, Quantity:Is this a better deal than buying a Single Item?
View detail
Fits: KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR
Carburetor overhaul
I used it on a 250TR carburetor overhaul that had been neglected for about 5 years.
I always use them because it would cost several times the budget to collect this many parts from OEMs.
However, the last time I used it in SEROW, the float valve failed and the overflow did not stop, so I returned it to the dirty OEM and was worried about whether it would work again this time.
Also, it would be great if you could get AirCutValve out there too!
View detail
Quantity:Pair (for Left and Right) The part numbers are different in the following table, so do not make a mistake.
I used it on an NSR250R SPRacer.
There are many parts that cannot be used with the HRCCarburetor kit.
Still, there are many Parts that are discontinued and not available for purchase, so it's a great deal!
View detail
Fits: YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX600
It's good enough
I used it to overhaul the carburetor on my SRX600.:I'm not complaining because I can buy it cheap at Set. There is a discontinued part when it is OEM already, so I think it is safe to have one when it is necessary. View detail
About Part Number FS-5513N Pilot Jet
CatalogueThe product arrived as per the guide.
However, please note that as per the Catalogue, the Pilot air jet is not included and needs to be purchased separately.
View detail
Useful for OH
【good point】
Required Quantity:It is very attractive that you can get a set product inexpensively.
It's a good idea to use this one, especially if you don't want to change the spec. of carburetor into a large one.
[Bad point]
None in particular
[Summary]
Easy to use product for vehicle Restore and carburetor OH.
You don't have to buy them all individually, so you can buy them without hesitation.
View detail
When in doubt, this is it
The KEYSTER Key StarCarburetor Fuel Adjustment Kit caught my eye, so I bought it on impulse this time.
The product is in line with the previous reviews I see on the net.
It's not that bad of an impression I've had of it
I don't know if I'll continue to use it in the future, but I'm glad I bought it
View detail
When in doubt, this is it
The KEYSTER Key StarCarburetor Fuel Adjustment Kit has arrived and I'd like to give you a quick in-play of how it works.
The product is in line with the previous reviews I see on the net.
It's not that bad of an impression I've had of it
I don't know if I'll continue to use it in the future, but I'm glad I bought it
View detail
Trying to set up a CB50S!
Restore of CB50S was completed and it came to run, so I thought I would try Carburetor setting for further study, but it has been six months.
I haven't tried it yet, but I'm looking forward to seeing how it changes.
Once the hot summer is over, I challenge you! You might do.
View detail
Cheap and Reliable Brand
Buying Parts around carburetor can be very expensive.
You can buy this one with just the Float valve, so it's more economical to buy this one which includes packing and other items.
The box is also good because you can use it to hold Small Dice Screw.
View detail
Used for carburetorOH
Purchased for carburetor OH of XL 250 S which had been left for about 5 years.
Not only is a fine part set but also includes Gaskets, so we can save you the trouble of ordering OEM Parts Number one by one.
I am also thankful that XL is 81 years old and has given out such old Motorcycle Parts.
For the purpose OH setting is still OEM, but because it can change the tone depending on the combination, the future Carburetor setting was very fun.
Level key StarSticker who gets lost as to where to put it is also attached. I tried it in the refrigerator for the time being, but it is pretty cute.
Recommendation!
View detail