Reviews
Fits: Others
BirdCITY125 not supported
The OEMBirdCITY125 is slightly incompatible because the tip of the Brake section interferes with the Cover.
Mirror holes are also not supported.
The useless Pocket is in the way.
The boa is not unnecessarily thick, so it is easy to operate, making it a winter necessity if you are dealing with it.
View detail
Fits: Others
I think the thing is good, but ….
Unfortunately, Support belt was not included.
I have installed it on a Handlebar, but am considering whether it is Large strong enough to use as is.
View detail
Handlebar Cover Primer! Easy installation, cuter than you'd expect!
[How is it used?
I decided to buy a Handlebar Cover, which I have always been interested in, because my fingertips froze after 2 hours of driving down the road with Winter Gloves and snow on the shoulder of the road. I don't want to use a grip heater at the moment, so I decided to use a handlebar cover.
Was the one you received as per Image?
I thought it would look a little cheaper than the price implied, but it's not so bad. I couldn't Image the fit since I was using it for the first time, but it was easy to install.
How was your experience with it?
It was installed on a CROSSCUB 110, so it is used for down the road (touring and city driving).
It is rather stable just by fitting it as described in the product description. In my case, I did not use the hole for Mirror because I wanted to remove all the parts except Season, and I tied the string through the base of the handlebar. I used it on the street and it was fine, and if you install it in good position with buttons, operation is not so bad. However, the Headlight (HIGH/LOW) switching button is difficult to operate. It is not impossible to use, but it is difficult to say that it is possible.
The space inside the cover is large enough to use a hand warmer. The opening of the cover has an AcrylicJersey rib, but it is not very long, so I use gloves (Rain Gloves of Y'sGear) that can cover the cuff. I can put my hand in and out easily with Winter Gloves, but I think they are too firmer.
[Points to note]
It may be advisable to consider and study the arrangement of operation buttons before purchasing.
How did it compare to other products?
I have never used Neoprene before so it's hard to compare, but I've seen several impressions that Neoprene deteriorates quickly, so I chose this one.
▼Others
Point and hang of installation
I don't think any special hang is necessary.
Items to buy together
Since the holes for Mirror look cheap if they are visible as they are, we used a cord stopper to hide the holes.
Opinions and requests to Manufacturer
Thank you for offering a very cute product at an affordable price.
View detail
It works better than I ever imagined!
I was surprised to see that it works better than I thought it would, and I read a lot of reviews of people wearing Handlebar Covers that said it was very effective. I was wondering if that was an exaggeration, but I decided to purchase this inexpensive product for the time being.
As a result, it was never Large Giggle, and the area around the Handlebar was completely windless, so my fingertips did not get numbingly cold even at temperatures below 10 degrees Celsius. I am satisfied with the effect.
However, the Cover is not generating heat. "Cold." it is not. Warmly." Since there is no Handlebar is in COTA status. To make it a COTA tool, I'm going to put a hand warmer inside the Cover.
When inserting the Axel into the Handlebar hole of the Handlebar Cover, it is better not to insert the Cover fabric between the Axel root umbrella and the HandlebarPanel. (The photo shows the work in progress) The friction becomes Large, making it harder for the Axel to open, slowing down acceleration, and making it harder to stop because it is hard to return to the Axel after releasing it. It is a little dangerous, so the Cover should not go over the umbrella at the base of the Axel.
Also, the position of the Mirror hole on the CUB and the position of the Mirror hole on the Cover do not fit well, so it is better not to use the Mirror hole, because it makes it difficult to operate the Cell on the Right and the Blinker on the Left. Also, the Mirror holes are so small that the MirrorMounting Bolt bites into the Cover fabric, so the Bolt cannot be tightened enough, and the Mirror loosens while driving.
Overall, I think this is a great product if you use it without the Mirror hole. The color is nice and I think this Brown is a better Match for the Red CUB than Black.
View detail
Good
I'm installing it on my VESPA, and I decided to use this one because the OEM one is too large to fit in the LargeShield.
It's also nice that Tan color is available in addition to the standard Black color.
It is a nice color that is not too overpowering and does not look cheap from a distance.
It was easy to install, and the functionality is fine.
View detail
No need for Winter Gloves!
It's perfect for the cold weather. The part where you put your hands is quite narrow, but the wind doesn't come in through the gap, and it makes your hands sweat. View detail
Fits: Others
If it is Business motorcycle
【What made you decide the purchase?】 Required
I was riding the Sports type motorbike, but since I go home every week using the expressway in the midwinter, I decided to buy thinking that I can not stick to the suit. However, I do not know if I can use it, so I chose the cheapest item.
【How was it actually used?】 Required
I could shield the wind well enough that the wind did not escape inside Cover. I thought I should have bought it sooner.
【Was it difficult to install? (Hard parts case)】 Any
Since it was attached to the Sports type motorbike with Cowl, when the handlebar was fully locked it got hit by the fabric and it was difficult to adjust so as not to hinder the running.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Any
I will not pull on my strength to prevent the fabric from breaking.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
[Is there anything I was disappointed about?] Required
As I suppose it is supposed to be attached to Scooter or Business motorcycle, it is unavoidable, but in running on a highway, Cover moves to the rear side of the Handlebar due to running wind, and the fear of touching the Front brake I noticed.
【Hope for Manufacturer - Please let me know if there are any improvement points】 Required
I want you to devise measures such as inserting a core so that Handlebar Cover does not move with running wind.
【Have you compared items?】 Required
Komine
[Others] Any
I do not think that it is bad as a product. I tried to devise various ways to attach it to my motorcycle, but I gave it up.
View detail
Fits: Others
For emergency
When it gets temperature that can not be endured by the destination of Touring, it is stuck in Bag as an emergency.
To me, since the appearance of Motorcycle is very large thing, there is resistance to starting from the beginning, but when it is multiplied by the tenacity of a single digit of temperature and it is such a nature and soon will collapse immediately.
After wearing for a while you can sense that body temperature returns to your hands.
It is very warm.
Product fabric is not as soft as Neoprene.
So windproof is quite expensive, but because of the Universal Product ingenuity for the draft wind becomes necessary.
View detail