Reviews
Easy to use
I used to use another company's aluminum screws, but they were so soft that the hex on the head of the screw would come off when tightened.
It is getting worse as it spreads more and more.
This product is hard and tight.
If the head size were a little larger, I would have used four of them, but they were Exactly in the part I use.
Cost performance is good.
View detail
Beautiful construction
Shape not available in Homsen, used for the exterior of Meter visor. View detail
It was cheaper than OEM Parts.
[How is it used?
Purchased as Bolt around Engine of SEROW225W.
Up to 1998 model year of SEROW225WE (4JG6:aka On-bu SEROW), the Bolt used around the Clutch cover and Generator cover is a Plus screw.
I don't care if the head of Bolt is Plus or hexagonal if I just ride it, but I'm afraid of damaging the head part of Screw when I replace the clutch plate, and I like Hexagon Bolt after 5MP for its appearance, so SEROW225 kept in my house is I am afraid of damaging the head part of the Screw plate.
I have been able to use it many times because it is more Reasonable than YamahaOEM's Bolt at such times.
Was the one you received as per Image?
The bolt size is M6 and the head part is 8mm, which is almost the same design as the OEM bolt used for the engine part of SEROW225WE (5MP) and SEROW250, so there is no discomfort at all and the bolt with the same length as the OEM bolt is also available in the lineup, so the bolt size has been changed to Large. It is a product as shown in the image.
Was the installation difficult?
This is only when used as described above.
The bolt on the original PlusHead is carefully removed so as not to damage the bolt, and then replaced with this product, which is the same length as the OEM bolt, and tightened with the Torque. This product is a two birds with one stone solution for me personally, as it will definitely make the bolt less likely to be pinched the next time it is removed, and it also looks better.
How was your experience with it?
I have used Yamaha OEM Bolt in the past, but there seems to be no inferiority to the OMBolt. I have no problem with it, and the price is too low to be thankful.
The number of Bolts in each length is different, but no matter which length Bolt you buy, it is definitely cheaper than OEMB Bolt. (Example:YamahaOEM Product No. 95024-06025Bolt,Flange 1 piece 121 yen×5 pieces = 605 yen, but with DRC, the same size can be purchased for 251 yen for 5 pieces)
[Included Parts:were they on?
None, Bolt only.
[Was there anything that disappointed you?
No problem at all, and since it is a bolt of Steel like YamahaOEM, there is no problem with compatibility with the Case's AluminumMaterial.
Other items that would be helpful
Point and hang of installation
When used, Screw lock agent is applied before tightening.
[Availability and clarity of the Instruction Manual
There is no Instruction Manual because the bolt is exactly as it looks, but in terms of ease of understanding, I think this is a top class easy-to-understand product.
[Notes]
Use properly to avoid twisting off the Head with Overtorque or nipping the Head with improper tightening work.
[ITEMS TO BUY TOGETHER
Nothing in particular, but the product itself is inexpensive, so it is good to buy it together with other products.
[Opinions and requests to Manufacturer
in this vein HondaOEM-like Bolt." Ya SEA BASSOEM-ish." KawasakiOEM-ish." I would appreciate it if each MotorcycleManufacturer-like BoltSeries of etc. is released.
View detail
This is the first time I bought a Black aluminum taper bolt, and it's good.
[How is it used?
Used for Demon150GR Cowl and License Plate Bolt.
Was the one you received as per Image?
This is the first time I have purchased a black aluminum taper bolt, but it is a deep black without fading etc. This is a good parenthesis.
I usually tend to choose Gold alumite, but Black is also quite austere.
Was the installation difficult?
It is an easy Custom to change.
Just measure the length of Bolt and buy the same length!
I DRCAluminum spacer because the company DRC Spacer, but ExactlyFit [Type01] We are using the following together.
How was your experience with it?
Anodized in Black, quite nice.
At a quick glance, it looks OEM-like, but it is a bit of Customization that those who understand it can understand.
Aluminum, so it's slightly lighter!
[Included Parts:were they on?
Only the product is in the Blister pack.
No Instruction Manual.
[Was there anything that disappointed you?
I have been a huge fan of this Series, and I will not be disappointed.
I think the cospa is good and there is a good variety of Sizes to choose from.
I hope DRC will release something other than M6Size!
View detail
Cheaper than Homesense
I can't believe the price for a pack of 5. Is there a profit to be made? I bought these bolts because the iron bolts on my car were rusting and I wanted to replace them. I bought these bolts because the iron bolts on my car were rusting, and with this quality, I would be happy to replace all the iron bolts on my car. View detail
Texture Up with Black Bolt! A little lighter! What are the effects? (Hatena)
I wanted to install a hand guard, but I felt that the weight of the bolt was too heavy. I also found an aluminum lock nut in DURA-BOLT Shoulder Bag. It is more quantity than the standard bolt nut.:1 Set weighs approx. 4.5g, Quantity:I am a little satisfied with the 18g weight reduction since 4 sets are used! The shape and color of the Bolt improves the appearance of the Parenthesis, and I am even more pleased with myself. View detail
Heavier than OEM Bolt
Bolt's head in the narrow part of the Engine was getting nappy.
Replaced with Stainless Steel here.
It's Stainless Steel, so the head won't chip off.
It was heavier than HondaOEM.
If you are concerned about weight, you should think twice before buying this product.
View detail
Beautiful and lightweight
I like these bolts because of the quality. The machining and anodizing are perfect. For this price, this quality product is the best. The tightening torque is "●Recommended tightening torque: M6 bolt, 0.6kg-m", so basically I use it for fairliners and covers in the engine part. Shipping to the Philippines was fast via economy mail (18 days). Very satisfied. View detail
For weight reduction and dress-up
We replaced it with DRCBolt for weight reduction and dress-up.
I had used an aluminum bolt that I had purchased at a direct-shipping shopping site in a certain country, but it broke when I tightened it, the screw threads flew off, etc. I had learned my lesson, so I decided to use this product, even though it is a little expensive.
As expected, there were no objects that blurred Mt. Screw or broke off in the middle.
I would not feel comfortable unless the product costs a little.
Due to the nature of the Gold genus, it is recommended to occasionally retighten or take measures to prevent sagging.
In my case, I apply a small amount of Screw lock agent to tighten the screws.
It was more effective than many times of increasing tightening. It does not sag at all.
Weight difference is NORMALSteel 25gx4pcs
M6x20Aluminum 5gx4pcs
1/5. Please use it to reduce weight.
View detail
For weight reduction and dress-up
We replaced it with DRCBolt for weight reduction and dress-up.
I had used an aluminum bolt that I had purchased at a direct-shipping shopping site in a certain country, but it broke when I tightened it, the screw threads flew off, etc. I had learned my lesson, so I decided to use this product, even though it is a little expensive.
As expected, there were no objects that blurred Mt. Screw or broke off in the middle.
I would not feel comfortable unless the product costs a little.
Due to the nature of the Gold genus, it is recommended to occasionally retighten or take measures to prevent sagging.
In my case, I apply a small amount of Screw lock agent to tighten the screws.
It was more effective than many times of increasing tightening. It does not sag at all.
Weight difference is NORMALSteel 25gx4pcs
M6x20Aluminum 5gx4pcs
1/5. Please use it to reduce weight.
There was no weight difference between the Cap bolt and the Flange bolt.
View detail
From the product made from POSH attached before, he wanted to make it crimson and it changed. It purchased by the spacer and a set.
From the product made from POSH attached before, he wanted to make it crimson and it changed.
It purchased by the spacer and a set.
View detail
It is kana not too bad...
It is kana not too bad... View detail
with child-fixation
The Rear Master Cylinder Cup's Fixing Screw was rusty and old, so I bought this one so I don't have to worry about rust.
It looks good, and being aluminum, it's not suitable for fixing that requires strength. The color of the corners peels off when tightening, so you have to be careful when tightening.
View detail
Appearance Up
Used on the GSX1300R HAYABUSA and finished with a special focus on Red this time. View detail
It's shiny and cool.
I was looking for a cool Bolt to hold exterior components in place.
We came across this product.
I don't need Titanium, but they sell only Titaniumium Bolt.
What is going on in this industry? I've been thinking about it.
I have been looking for a cool Bolt for a long time.
First 4Quantity:Set is just right.
I wanted to use 2Quantity because I wanted to unify the exterior Bolt.:I bought a set
Parenthesis is great, and it also reduces the number of tools I have to use. Thank you very much. Thank you forever.
Maybe it will be Button cap in general?
Many of them have high, round heads and are not cool.
This is cool, low head.
I would have preferred one more size up in Hex.
I'm going to lick it. I mean, I licked it a little bit.
But it's cool.
If you are using cheap Hex, beware.
However, I wonder if it suffers from Screw diameter.
Fashion is patience.
Let's all carefully tighten the Screw.
View detail
The finish is Beauty.
[How is it used?
Installed to hide the ragged hole left after removing the parts.
However, the Bolt head is a little too small to hide the hole, and it has become the fertilizer of Chest.
(The thing is good. I did not MATCH how to use it.)
Was the one you received as per Image?
Generally as per Image.
I chose Titaniumium color, but it's more of a gray color than Titanium.
Titaniumium color is different in each company, so the name is misleading.
Was the installation difficult?
It's a normal Bolt, so there's nothing difficult about it.
[Was there anything that disappointed you?
As I mentioned above, the thing is good.
"Titanium" Don't be misled by the notation that
View detail
Look, in exchange.
One point, because it was Aluminum with Color, it is a purchase for the fixation of the place where the force is not applied with self-satisfaction.
The Taper shape looks good, but it will lose color over time, how long will it last? I wonder.
It's Color Anodized Aluminum, so it can't be helped.
Also, it wasn't a SpongeSmall divided container like the picture posted.
View detail
with Color key, Aluminum
I bought this for Rust prevention, One point, and for fixing places that don't require much force.
The color, vibrant, looks good at the moment, but how long will it hold up to UV color loss?
I hope it holds to some extent.
Also, the price is a bit steep for 4 bottles.
View detail
Yoshi Yoshi
Perfect quality for the price. If you use it, Titaniumium color is Recommendation. By the way, there is a secret technique to make it revive by mucky if the black color fades away. It is also used in RAY Steam of all Japan. 2.1.Do not use it against Stainless Steel because of the electrolytic corrosion. If you don't know what electrolytic corrosion is, please Google it. 2. Exhaust and air-cooled engine systems. It's natural not to use it in places where strength is required.... View detail
No problem
I was looking for a Lock nut with Flange at the OEM M6 Nut Replacement It's nice to know that you can buy these UniversalSmall things from Webike as well It is I'm planning to expand to other sizes in the future View detail