Reviews
Commonly usable
It is not difficult to use and can be used normally.
In the usage situation, the handlebar is removed from the vehicle body, the handlebar is fixed in a vise, this product is installed, and the cut is performed.
It is not a tool I use often, but I think it is worth the price.
View detail
Fits: KTM , HUSABERG FE250-501, HUSQVARNA FC250-450, HUSQVARNA FE250-501, HUSQVARNA FX350, HUSQVARNA FX450, HUSQVARNA TC125, HUSQVARNA TC250, HUSQVARNA TE150-300, HUSQVARNA TX125, HUSQVARNA TX300, KTM 125-300XC-W, KTM 125SX, KTM 150SX, KTM 250-500EXC-F, KTM 250EXC, KTM 250SX, KTM 250SX-F, KTM 250XC, KTM 300EXC
Buy Fork Springfor Replacement
I used it on my MY22 KTM250EXC to replace the Fork Spring. It works fine, but a 24mm Spanner would be useful too. View detail
Good tool if used as intended.
outer fork tube clamp has a threaded lever on the side of the clamp that closes its jaws tightly on the fork. You can even remove the threaded lever from the outer fork tube clamp, so that the fork tube clamp can be placed in the vise anywhere along its length, not just by the fork dropout. Using the outer fork tube clamp is as easy as sliding it on the fork stanchion tube, tightening the threaded lever and holding the fork vertically while loosening the fork cap or base valve. Additionally, you can lay the fork on your workbench with the long arm of the tool stopping the fork from spinning by bracing it against the bench with the tool’s long arm. The DRC/Enzo outer fork tube clamp makes that possible, easier, cheaper and safer.Good price fast delivery worked perfect.Highly recommend View detail
Great tool if you have many bikes
I have dirtbikes and all the forks are different sizes. Finally bought this tool and now I can have one tool for many applications. I have used it twice and worked great. Stores in a small box and cleanup is a breeze. Very nice and well built tool.works extremely well. The inserts are a very hard plastic. I saw no deflection or deformation during use, but nice in that they are not metal so no tube marring or scratching potential. Metal outer collar is nice and heavy. The metal collar does not snap together, so if you are not holding the tool, it will split. I didn't find this to be a problem, but thought I could use wire ties if needed to hold the shells together.Great product.Webike too fast.packaging is great, delivery is fast.you may not be my friend but you can take the recommendation if you like.Have a great day View detail
Fits: SUZUKI RM250, SUZUKI RM125, SUZUKI RM-Z450, SUZUKI RM-Z250, SUZUKI DR-Z400SM, KAWASAKI KX450F, KAWASAKI KX450, KAWASAKI KX250F, KAWASAKI KX250 (2019-), HONDA CRF450X, HONDA CRF450RX, HONDA CRF450R, HONDA CRF450R, HONDA CRF450L, HONDA CRF250X, HONDA CRF250RX, HONDA CRF250R, SUZUKI RM-Z450
Worked great, simple and easy.
Each job needs the correct tool to work on motorcycle, this tool made it easy, plus there was no damage to the aluminum nut. Be aware that these may not fit on the fork cap when in the triple clamp, so you may need soft jaws or something else to hold the fork tube. I will probably use tools for loosening and final tightening of the fork cap, but will continue to use these for removing the inner cartridge. A must have tool if you work on your own bike. Just like all of DRC's tool this wrench is nicely made and you can tell it's a quality tool by the weight and feel in hand. I get 95% of my orders delivered short time from Webike. Awesome company, and all the Customer support are top of the line and really show the level of customer service Webike delivers to their customers. View detail
I need a scale.
I had a Front Fork Oil Level Gauge that was a big dropper with a Memory attached to it, but it was damaged over time. I bought this one, but I think I prefer the one I had before. I wish it had a scale, but I guess that would have increased the price, so I didn't put it on. View detail
Commonly usable
The price is cheap and the quality is good. No complaints. View detail
Gets the job done!
my only critic would be that the writing for me was small and had to really focus to gauge my levels. Another one of those tools you don't really need but makes the job of adjusting fork oil levels a no brainer. Between the dirt bikes and mountain bikes this will pay for itself and allow making adjustments much easier. And, if you can let your buddies borrow it if they buy the beer, it is a win win. View detail
ForkOH essentials when matching diameter ForkOH
I used to buy a good PVC Pipe for every OH, but this one will do the job.
Installation of Fork seal will be easier anyway.
The price is less expensive than Manufacturer's SST by car. One size is available for the other, and this is the price for such a wide range of sizes.
The usability of the product is also normal, although it is not as good as the dedicated products.
I think it is inexpensive considering the fact that it is possible to set up a seal for sure.
View detail
It was subtle.
I was able to remove dirt from a large area, but the Brush included with Chain Cleaner was better at removing dirt in small areas and in the back. I thought the included Brush was smaller and easier to use.
In the end, we concluded that it would be quicker to use the included Brush from the beginning.
I think this area depends on the individual's cleaning style and personality (nervousness, etc.).
View detail
It is a useful Tool.
I purchased this product to measure the sag of XEF250.
Rear tire floated "0G" from the state of the straddle. "1G." state, measure the difference and adjust the Pre-road of the Suspension so that the SuspensionStroke is one-third when straddled.
Marker shows the difference in Stroke, so work that used to be done by two people can now be done by one.
One point to note is that at first the screws that hold the Marker to the Wire were tightened, so the measurement could not be taken properly.
It needs to be loosened a little so that it moves Smoothly.
One third of SuspensionStroke was 62mm, but I set it at 73mm to soften it.
I will be driving in various areas to further adjust the Pre-road.
View detail
Fits: SUZUKI RM250, SUZUKI RM125, SUZUKI RM-Z450, SUZUKI RM-Z250, SUZUKI DR-Z400SM, KAWASAKI KX450F, KAWASAKI KX450, KAWASAKI KX250F, KAWASAKI KX250 (2019-), HONDA CRF450X, HONDA CRF450RX, HONDA CRF450R, HONDA CRF450R, HONDA CRF450L, HONDA CRF250X, HONDA CRF250RX, HONDA CRF250R, SUZUKI RM-Z450
DRC Pro fork cap wrench
This fork cap wrench is good, light, compact & strong. It comes with english instruction. So now i can work with ease & piece of mind to replace newly bought outer tube and aftermarket spring. View detail
Safe and easy to apply force
Shinobu Sen has an exhaust system and a chain cover on the chain side, and there is not much room for a chain brush, so we used a three-sided brush mainly on the rear sprocket.
I thought that by polishing the front and back sides at the same time, the force might have been unbalanced and caused it to break. I thought that since it is a 90-degree two-sided polish, there would be no need to worry about it breaking, so I purchased this product because it is better to clean one side at a time, although it takes more time and effort.
It is easy to grip and fits well in my hand, from now on I can use it with ease even if I put a lot of effort into it.
The bristles of the flaps are longer and softer than those of previous products, but I have high expectations for durability and stain removal.
DRC's Seal had no adhesive strength and peeled right off.
View detail
Fits: SUZUKI RM250, SUZUKI RM125, SUZUKI RM-Z450, SUZUKI RM-Z250, SUZUKI DR-Z400SM, KAWASAKI KX450F, KAWASAKI KX450, KAWASAKI KX250F, KAWASAKI KX250 (2019-), HONDA CRF450X, HONDA CRF450RX, HONDA CRF450R, HONDA CRF450R, HONDA CRF450L, HONDA CRF250X, HONDA CRF250RX, HONDA CRF250R, SUZUKI RM-Z450
if you are rebuilding shocks... you need this
This is a must if you plan to replace your own fork seals on shows shocks. Well made and does the job. Loosen the caps before you remove the forks from the bike.it is very light and cosmetically appealing. I very light weight and precise.great tool to add to the collection for working on the CRF 450. It serves multi-functional from the top cap to pulling the internal dampening rod. Reasonable price. Loosen the caps before you remove the forks from the bike. View detail
Work efficiency has been improved.
VFR400 (NC30) I have been using it to press in the oil seal on the front fork of the "M". The weight of the body allows for easy insertion without much effort. I would appreciate it if you could keep the price a little lower. View detail
Works perfect, I'm glad I bought it.
As advertised, it makes it easy to use alone. There are no measurement markings on this tool, you'll have to measure on your own The instructions are a little lacking but the video posted online clears up any questions It worked perfect after a small adjustment to the brass piece which was described in the instructions. I tried it 3 times and had consistent readouts each time. Then I tried measuring the sag the old way with two people and came out with the same numbers. This this works perfect. Definitely worth it. View detail
HUSQVARNA's Front forkOH with Spec.
I used it to overhaul the front fork of my HUSQVARNA TE250, which I use when I play on forest roads, Enduro, and sometimes Hard Enduro-like activities. I found this product. I was able to loosen the top cap during the overhaul of the fork without any problems.
It is very helpful that these SST-like tools are available from DRC.
Thanks for the good Lineup.
View detail
Easy to use
[How is it used?
I had been using 3-sided Type's Brush for chain cleaning, but it was not very user-friendly and I was looking for an alternative.
We chose this product because it seemed easier to use with two sides.
Was the one you received as per Image?
It is easy to use with a good Size feel.
It is rather unimportant, but Sticker was put up quite a bit out of place! (Lol)
How was your experience with it?
As I expected, I found the 2-sided Brush easier to use than the 3-sided Brush for me.
I was not happy with the 3-sided design, as it was quite tricky, and it was hard to apply it to the Chain, even though it could only be used on 2 sides after all.
I think this was eliminated with two sides, resulting in improved Chain cleaning time and Stress.
[Points to note]
Not particularly
How did it compare to other products?
Compared to 3-sided Brush as mentioned above, we thought this product was superior.
【Review】
Personally, I found it much easier to use than 3-sided Brush by far.
There seems to be a replacement Brush, so I think it would be economical for long term use.
View detail
good looking item
finishing is good. But unfortunatly its broken when i tried to tighten the stemnut. So i was unable to use it too much time. Not a strong item to use in more hard works. View detail