Reviews
I was able to replace it properly.
I had a DRC Chain tool in the past, and when cutting a 428 chain, the tip of the tool broke off and I had trouble replacing it, so I was distrustful of this manufacturer's products.
This time, I decided to buy it after seeing other people's impressions and videos that seemed to work, and after considering the labor cost to ask the shop to do it.
I started with Chain cut to replace the 520 Chain and was able to cut it with no problem at all.
The work proceeds according to the instruction manual and is completed relatively smoothly until the Plate is press-fitted.
The last Crimp work, the Body is a little smaller than the Material.:Although it was light for aluminum and required considerable force, we managed to install Crimp.
I think it is a great product that can do everything from cut to crimp with just one tool. The size is larger than the previous version and I think it is stronger.
If you want to replace the Chain and Sprocket by yourself, we recommend this product because it is reasonably priced and works well!
View detail
Size is also convenient to carry.
I take it with me when I go to the woods. It is lightweight and just right in terms of Size. I think the air pressure measurement is also accurate, which is important. View detail
Fits: KTM 65SX, KTM 250SX, KTM 125SX, GASGAS EC250, GASGAS EC200, GASGAS EC125, KTM 250EXC, KTM 200EXC, KTM 125EXC, KAWASAKI KX65, KAWASAKI KX85, KAWASAKI KX125, KAWASAKI KX250, HONDA XR650, HONDA CRF450X, HONDA CRF450R, HONDA CR85R/RII, HONDA CR250, HONDA CR125, YAMAHA YZ85
Protect your spark plugs while out riding trails
It would suck if you got stuck in the boonies because of a fouled plug and you're not carrying any spares. This case works perfectly. The most important thing is to protect the spark plugs from impacts that could change the gap or damage the tip.Not sure about larger plugs, but this was absolutely spot on for my bike plugs.It's made of a quality plastic.Really good price. Small and very secure, for longer trips. Especially when going into the local dark continents, where no one else goes. Good travels, safe journeys, and... go prepared. No one else cares, or goes. View detail
Easy to use
I used to use another company's aluminum screws, but they were so soft that the hex on the head of the screw would come off when tightened.
It is getting worse as it spreads more and more.
This product is hard and tight.
If the head size were a little larger, I would have used four of them, but they were Exactly in the part I use.
Cost performance is good.
View detail
Commonly usable
It is not difficult to use and can be used normally.
In the usage situation, the handlebar is removed from the vehicle body, the handlebar is fixed in a vise, this product is installed, and the cut is performed.
It is not a tool I use often, but I think it is worth the price.
View detail
Fits: KTM , HUSABERG FE250-501, HUSQVARNA FC250-450, HUSQVARNA FE250-501, HUSQVARNA FX350, HUSQVARNA FX450, HUSQVARNA TC125, HUSQVARNA TC250, HUSQVARNA TE150-300, HUSQVARNA TX125, HUSQVARNA TX300, KTM 125-300XC-W, KTM 125SX, KTM 150SX, KTM 250-500EXC-F, KTM 250EXC, KTM 250SX, KTM 250SX-F, KTM 250XC, KTM 300EXC
Buy Fork Springfor Replacement
I used it on my MY22 KTM250EXC to replace the Fork Spring. It works fine, but a 24mm Spanner would be useful too. View detail
I need a scale.
I had a Front Fork Oil Level Gauge that was a big dropper with a Memory attached to it, but it was damaged over time. I bought this one, but I think I prefer the one I had before. I wish it had a scale, but I guess that would have increased the price, so I didn't put it on. View detail
textured good feeling
Purchased as a Tirefor replacement, I chose it for its visual quality. View detail
Beautiful construction
Shape not available in Homsen, used for the exterior of Meter visor. View detail
Corresponding to each size
Buy it because it can Cover from SmallEngine Displacement Volume to LargeEngine Displacement Volume.
The workability will not be difficult once you get used to it.
View detail
Band of Exhaust System
Exhaust System band removal becomes easier. View detail
To Grip's Wiring
Used for Wiring for Grip.
1.It was Large sturdy enough for 5 times, so even if I made a mistake such as over-tightening and cutting it.
View detail
difficult to get a hit on (e.g. in a fight)
[How is it used?
Tire hand set
Was the one you received as per Image?
Small at best, Compact at worst
How was your experience with it?
Normal use Valve core is a little shallow
[Points to note]
Red to see the imprint and not to lose it.
How did it compare to other products?
Anodized and texture is good
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Safe and easy to apply force
Shinobu Sen has an exhaust system and a chain cover on the chain side, and there is not much room for a chain brush, so we used a three-sided brush mainly on the rear sprocket.
I thought that by polishing the front and back sides at the same time, the force might have been unbalanced and caused it to break. I thought that since it is a 90-degree two-sided polish, there would be no need to worry about it breaking, so I purchased this product because it is better to clean one side at a time, although it takes more time and effort.
It is easy to grip and fits well in my hand, from now on I can use it with ease even if I put a lot of effort into it.
The bristles of the flaps are longer and softer than those of previous products, but I have high expectations for durability and stain removal.
DRC's Seal had no adhesive strength and peeled right off.
View detail
Great tool for the job
Been using a spring puller that was completely made out of metal, handle included. I love tools.I buy more than I need, and my more specialized tool usage is usually few and far between. That is not the case for a spring hook tool! This thing is simple, well made, and I've gotten way more use out of it than I initially thought I would. could not believe the difference a well designed spring tool makes.I had always used pliers, with springs flying everywhere and skinned knuckles This tool makes it simple and quick. It is so much better than playing the plier or screwdriver game when trying to install and remove some of those stubborn exhaust springs! View detail
Fits: SUZUKI RM250, SUZUKI RM125, SUZUKI RM-Z450, SUZUKI RM-Z250, SUZUKI DR-Z400SM, KAWASAKI KX450F, KAWASAKI KX450, KAWASAKI KX250F, KAWASAKI KX250 (2019-), HONDA CRF450X, HONDA CRF450RX, HONDA CRF450R, HONDA CRF450R, HONDA CRF450L, HONDA CRF250X, HONDA CRF250RX, HONDA CRF250R, SUZUKI RM-Z450
if you are rebuilding shocks... you need this
This is a must if you plan to replace your own fork seals on shows shocks. Well made and does the job. Loosen the caps before you remove the forks from the bike.it is very light and cosmetically appealing. I very light weight and precise.great tool to add to the collection for working on the CRF 450. It serves multi-functional from the top cap to pulling the internal dampening rod. Reasonable price. Loosen the caps before you remove the forks from the bike. View detail
Work efficiency has been improved.
VFR400 (NC30) I have been using it to press in the oil seal on the front fork of the "M". The weight of the body allows for easy insertion without much effort. I would appreciate it if you could keep the price a little lower. View detail
Works perfect, I'm glad I bought it.
As advertised, it makes it easy to use alone. There are no measurement markings on this tool, you'll have to measure on your own The instructions are a little lacking but the video posted online clears up any questions It worked perfect after a small adjustment to the brass piece which was described in the instructions. I tried it 3 times and had consistent readouts each time. Then I tried measuring the sag the old way with two people and came out with the same numbers. This this works perfect. Definitely worth it. View detail
It is used for wiring at the time of grip exchange. Unite with other shoppings.
It is used for wiring at the time of grip exchange.
Unite with other shoppings.
View detail
Used for first Chain exchange
I used this tool for my first Chain replacement with no difficulty. [Color] Clear is ready! View detail