Reviews
It's solid.
[How is it used?
I use it for my regular Chain cleaning.
Was the one you received as per Image?
The texture was more solid than Image.
The weight is more than I imagined when I held it, and the handling is good.
How was your experience with it?
In the past, I've used the thin Brush and Tooth Brush that come with the extras.
Compared to those, it's easy to clean two surfaces at once.
I also felt that it was easy to clean because it was easy to apply force.
[Points to note]
As others have written, the ends of the hair are a little short so it is hard to clean the back of the Chain.
How did it compare to other products?
The Type that is sold in the street shop has a tail that I don't know how to use on the other side of 3 sides Plus, but compared to them, I was very satisfied because it was written DRC.
In addition, I think that the cost performance is good because I can exchange the brush itself when I use it to some extent though other brushes are possible.
View detail
Buy something you've lost
I bought this because I lost my previous spring hook. I chose the DRC one because I am an off-road motorcycle rider. It is very useful for me because of its straight shape and easy to put on and off the chamber. View detail
It is functional
There are 4 sizes with curve tip and flat tip..it functions as it should. Built quality is average because the paint peel off after usage. View detail
Fits: KTM 65SX, KTM 250SX, KTM 125SX, GASGAS EC250, GASGAS EC200, GASGAS EC125, KTM 250EXC, KTM 200EXC, KTM 125EXC, KAWASAKI KX65, KAWASAKI KX85, KAWASAKI KX125, KAWASAKI KX250, HONDA XR650, HONDA CRF450X, HONDA CRF450R, HONDA CR85R/RII, HONDA CR250, HONDA CR125, YAMAHA YZ85
Storage & Protection of Plug
[How is it used?
I'm playing Enduro with my 2nd car, which is more Hard.
If Setting is out, it is true that Plug does not CUB, but because it is possible to CUB when it runs in a strange place without being able to open it too much with delicate Setting, it is running with Plug in CamelBag.
You can carry the box around with you, but it often falls into the stream or the condensation from the ice in the CamelBag ruins the box, so I keep it in this storage container.
Was the one you received as per Image?
As per Image
How was your experience with it?
It's really nice that the box doesn't crush or get soggy, and it protects the Gap.
[Points to note]
It is a pity that sometimes Terminal remains in Body when Terminal is paired separately.
How did it compare to other products?
This was the only one in stock, so I went with this one.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
KTC's Plug Wrench Short (https://www.webike.net/sd/20024621/) This and Quantity:Set is the 2nd ride, buy it for nowQuantity:Set, I think.
View detail
It is excellent in costa.
If the brush of the chain brush is damaged, only the brush part can be replaced, so it is Reasonable. If it were a little cheaper, there would be nothing to say, but it is a grateful product. It is convenient that it is easy to replace. View detail
I lose them all the time.
[How is it used?
I'm playing Enduro and playing with it.
I change tires frequently, and one thing that happens is that I lose my bugger.
It's frustrating, isn't it? I can't do anything without airing it out.
I decided to replace it with this product, which has an easily recognizable color & straps to prevent that from happening again.
Was the one you received as per Image?
As per Image
How was your experience with it?
I love how flashy the colors are! You can find it easily.
If you don't choose Red, it doesn't matter.
[Points to note]
The Body is round and it rolls.
It is Recommendation to put Strap on it to prevent it from rolling.
How did it compare to other products?
I chose this one that was delivered immediately.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
Keep the Strap on, Large thing.
View detail
Very easy to use!
I had been using a U-shaped Brush, but when I was browsing the Site, I found this product and thought it looked easy to use, so I popped it in.
I think the U-shaped one is designed to wash three sides at once, but it gets stuck so tightly that you can't move it freely.
This allows you to carefully brush the entire surface in the direction you apply the Brush.
The handle is also made of gold and is sturdy, and there is a replacement brush, so even if the brush is damaged, you can replace it and use it for a long time.
View detail
Fits: HONDA CRF450R, HUSQVARNA TC250, HUSQVARNA TE310, HUSQVARNA TE449, HUSQVARNA TE511, KAWASAKI KX125, KAWASAKI KX250, KAWASAKI KX450F, KAWASAKI KX85, SUZUKI RM250, SUZUKI RM-Z250, HUSQVARNA TE250, KAWASAKI KX250F, SHERCO 500SCF FACTORY, SHERCO 450SCF FACTORY, SHERCO 300SCF FACTORY, SHERCO 250SCF FACTORY, SHERCO 300SC FACTORY, SHERCO 250SC FACTORY, SHERCO 125SC FACTORY
This jig is especially useful for KYB. I'm really glad I purchased it.
This is really useful. There's nothing you can't do without it, but if you have it, you can complete the task quickly.
The structure of the inside of the cup which doesn't scatter Oil around like a water gun, and the angle instantly change, and the air vent is
It's already very convenient. 。 Anodized with a cool finish, it's perfect when it comes to the feeling of owning a tool.
I would like to see a cheaper version with just the functions sold. This is why I reduced the price by 2 stars. I'm sorry.
View detail
Once you use it, you can't stop.
If you've ever had to replace a tire with a tube, you've probably done it before.
I can't get the Valve of the Tube through the hole of the Rim because my finger hurts...
In such a case, it is this. The shape is different, but functionally it is the same as other companies' products of the same etc.
I've been using it for about 30 years, and it's now dead due to a broken wire (laughs).
I bought it without hesitation because it is made by DRC which is famous in the Off-road world.
It's going to last a long time
View detail
Thank goodness for Repair Parts!
[How is it used?
Chain tool of DRC (https://www.webike.net/sd/22054739/) Repair Parts.
I bought this because I made a mistake in using it and bent the original Pin that was there.
Was the one you received as per Image?
The product was as shown in the pictures.
Different Diameter Quantity:It contains 2pc CutPin.
How was your experience with it?
It is natural because it is from the same Manufacturer, but there was no problem at all.
I'm sure it won't basically bend right away if you use it normally, but Repair Parts was a big help.
[Points to note]
I think it's more important to make sure you cut down the Chain's Pin before using the CutPin.
It is often explained how to shave the head of a pin with a grinder or something like that, but is it a normal stick? A board? You can shave the head of the pin with a file for about 5 minutes.
How did it compare to other products?
I bought this product without comparing it with other products, but the standard is unified to some extent...?
The shape is the same, and I don't think it can be used by other manufacturers, but the one of the same manufacturer is cheap.
【Review】
Compared to the CutPin that comes with the original, there is a difference between the triangular or flat butt side, but there is no problem at all in using it.
When I bent the pin, I was in a hurry to see what I would do if I didn't get Repair Parts, but I'm glad I was able to purchase them safely.
View detail
Core driver that I'm sure I'll lose
I bought this because I lost my KITACO core driver.
The feeling of use is not a problem at all, and because it is small, it can be used for the Spoke wheel. As expected, it is a manufacturer that specializes in Off cars.
I wanted to buy Red, as mentioned in other Impressions, but it didn't seem to be in stock, so I went with plain, but it's a color that seems easy to lose.
It looks like a Bolt or Spacer, so if you drop it in the Garage and it gets mixed in with the Gold parts, you won't know it's there.
Because the hole for Strap is also vacant, it is possible to make it to Key Holder and to take measures, but I recommend that you buy Red.
Since it is so small, you can keep it in your portable tool case.
There is one with a handle that is easier to use, but it takes up unexpectedly much space, so this is just right.
View detail
The finish is Beauty.
[How is it used?
Installed to hide the ragged hole left after removing the parts.
However, the Bolt head is a little too small to hide the hole, and it has become the fertilizer of Chest.
(The thing is good. I did not MATCH how to use it.)
Was the one you received as per Image?
Generally as per Image.
I chose Titaniumium color, but it's more of a gray color than Titanium.
Titaniumium color is different in each company, so the name is misleading.
Was the installation difficult?
It's a normal Bolt, so there's nothing difficult about it.
[Was there anything that disappointed you?
As I mentioned above, the thing is good.
"Titanium" Don't be misled by the notation that
View detail
Fits: KTM 65SX, KTM 250SX, KTM 125SX, GASGAS EC250, GASGAS EC200, GASGAS EC125, KTM 250EXC, KTM 200EXC, KTM 125EXC, KAWASAKI KX65, KAWASAKI KX85, KAWASAKI KX125, KAWASAKI KX250, HONDA XR650, HONDA CRF450X, HONDA CRF450R, HONDA CR85R/RII, HONDA CR250, HONDA CR125, YAMAHA YZ85
Nice product to keep a spare spark plug in my tool roll. It should keep a spark plug free of dirt and moisture with no problem. View detail
Necessary and sufficient
I used it to Grease up the Stem bearing on my KLX230R.
The size is perfect. Accuracy is also not a problem at all. When I saw the product, I thought that it was a little too small, but since Stem bearingNut is not the part where Torque is applied in the first place, I think that this is just right.
View detail
Tire Replacement Offerings
[How is it used?
I compete in Enduro races as a hobby.
I change tires frequently, choosing tires to match the course and trying out new tires when they come out.
The Point that is quite irritating in that case is Timing through the Valve part of the Tube.
This product is a great solution to that frustration.
Thread it through the Valve hole beforehand and attach it to the Screw hole in the Valve core. All you have to do is pull it.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It has been overwhelmingly easy.
How was your experience with it?
Best. The back of my hands were always getting raggedy, but it's easy not to have to force my hands into it.
[Included Parts:were they on?
Included Parts:Or rather, the tip is a bug-turner, which is convenient.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I think it would be easier to thread through the hole if it was more tapered.
View detail
Fits: HUSQVARNA TE450, KAWASAKI KLX110, HONDA XR50 MOTARD, HUSQVARNA TE250, HONDA CRF150R, HONDA XR250MOTARD, HONDA XR250, APRILIA RXV450, YAMAHA YZ450F, YAMAHA WR250X, YAMAHA YZ250F, YAMAHA WR450F, YAMAHA WR250R, YAMAHA WR250F, YAMAHA TT-R50E, SUZUKI RM-Z450, YAMAHA TT-R125LW, SUZUKI RM-Z250, SUZUKI DR-Z400S, KTM 450SX-F
Isn't the Plug box fragile?
When it is riding on the Motorcycle of Single plug, it is Out when it lets you wear Plug.
I always keep a spare Plug on hand for such a case, but when I put the whole box in the tool box, etc., there have been many times until now that the box has been crushed when I use it.
It is often the case that the inside is Large sturdy, but when I was always concerned, I discovered this commodity of DRC, and bought it immediately. high Plug of Windshield IRIDIUM etc. is sold with the sturdy Case of plastic one by one, and there is no worry, but Plug of the normal goods is Case of paper. At the time of touring, I think that it is convenient also when carrying the spare Plug.
View detail
For carrying a 2-stroke motorcycle
I bought a 2-stroke motorcycle for the first time in a long time, and I was looking for a 2-stroke oil container on the condition that I would use it for street riding as well.
60:1 So I thought I could use a plastic container to carry around the OilSugar itself because it was too much, but I found a product that looked good at DRC and bought it.
I haven't used it yet, but I think it will be used for Touring.
View detail
That's easy.
I bought this for ForkOH.
It was a little difficult to suck out the hard oil, but the work itself was very easy!
Maybe it's for softer Oil.
View detail
It didn't work.
It was said to be available in 420 Chain, but it was not available. View detail
Looks easy to use and durable.
I used it to cut a 520Size Chain.
If you combine a Socket with a Handlebar of a reasonable length, you can use
I was able to easily cut the Chain without dropping the Pin head.
In addition, I changed to DID's Clip type Chain with light press fit, but the GuideBolt of this product is not enough to press the center of the Plate.:When I set it, I was able to do it to press fit. I was lucky.
I've only used it once, but I don't think it's going to break and I think the cost performance is good enough.
View detail