Reviews
Commonly usable
The price is cheap and the quality is good. No complaints. View detail
Gets the job done!
my only critic would be that the writing for me was small and had to really focus to gauge my levels. Another one of those tools you don't really need but makes the job of adjusting fork oil levels a no brainer. Between the dirt bikes and mountain bikes this will pay for itself and allow making adjustments much easier. And, if you can let your buddies borrow it if they buy the beer, it is a win win. View detail
Easy Cut and Crimp.
The first time I used this Tool to replace a Chain, I was able to do so without any problems. This tool is sturdily made and well designed, which gives me a sense of ownership.
The CutPin is also sturdy. The CutPin for Cut is also very strong.
It is a bit expensive, but I recommend it.
View detail
It was cheaper than OEM Parts.
[How is it used?
Purchased as Bolt around Engine of SEROW225W.
Up to 1998 model year of SEROW225WE (4JG6:aka On-bu SEROW), the Bolt used around the Clutch cover and Generator cover is a Plus screw.
I don't care if the head of Bolt is Plus or hexagonal if I just ride it, but I'm afraid of damaging the head part of Screw when I replace the clutch plate, and I like Hexagon Bolt after 5MP for its appearance, so SEROW225 kept in my house is I am afraid of damaging the head part of the Screw plate.
I have been able to use it many times because it is more Reasonable than YamahaOEM's Bolt at such times.
Was the one you received as per Image?
The bolt size is M6 and the head part is 8mm, which is almost the same design as the OEM bolt used for the engine part of SEROW225WE (5MP) and SEROW250, so there is no discomfort at all and the bolt with the same length as the OEM bolt is also available in the lineup, so the bolt size has been changed to Large. It is a product as shown in the image.
Was the installation difficult?
This is only when used as described above.
The bolt on the original PlusHead is carefully removed so as not to damage the bolt, and then replaced with this product, which is the same length as the OEM bolt, and tightened with the Torque. This product is a two birds with one stone solution for me personally, as it will definitely make the bolt less likely to be pinched the next time it is removed, and it also looks better.
How was your experience with it?
I have used Yamaha OEM Bolt in the past, but there seems to be no inferiority to the OMBolt. I have no problem with it, and the price is too low to be thankful.
The number of Bolts in each length is different, but no matter which length Bolt you buy, it is definitely cheaper than OEMB Bolt. (Example:YamahaOEM Product No. 95024-06025Bolt,Flange 1 piece 121 yen×5 pieces = 605 yen, but with DRC, the same size can be purchased for 251 yen for 5 pieces)
[Included Parts:were they on?
None, Bolt only.
[Was there anything that disappointed you?
No problem at all, and since it is a bolt of Steel like YamahaOEM, there is no problem with compatibility with the Case's AluminumMaterial.
Other items that would be helpful
Point and hang of installation
When used, Screw lock agent is applied before tightening.
[Availability and clarity of the Instruction Manual
There is no Instruction Manual because the bolt is exactly as it looks, but in terms of ease of understanding, I think this is a top class easy-to-understand product.
[Notes]
Use properly to avoid twisting off the Head with Overtorque or nipping the Head with improper tightening work.
[ITEMS TO BUY TOGETHER
Nothing in particular, but the product itself is inexpensive, so it is good to buy it together with other products.
[Opinions and requests to Manufacturer
in this vein HondaOEM-like Bolt." Ya SEA BASSOEM-ish." KawasakiOEM-ish." I would appreciate it if each MotorcycleManufacturer-like BoltSeries of etc. is released.
View detail
Corresponding to each size
Buy it because it can Cover from SmallEngine Displacement Volume to LargeEngine Displacement Volume.
The workability will not be difficult once you get used to it.
View detail
This is the first time I bought a Black aluminum taper bolt, and it's good.
[How is it used?
Used for Demon150GR Cowl and License Plate Bolt.
Was the one you received as per Image?
This is the first time I have purchased a black aluminum taper bolt, but it is a deep black without fading etc. This is a good parenthesis.
I usually tend to choose Gold alumite, but Black is also quite austere.
Was the installation difficult?
It is an easy Custom to change.
Just measure the length of Bolt and buy the same length!
I DRCAluminum spacer because the company DRC Spacer, but ExactlyFit [Type01] We are using the following together.
How was your experience with it?
Anodized in Black, quite nice.
At a quick glance, it looks OEM-like, but it is a bit of Customization that those who understand it can understand.
Aluminum, so it's slightly lighter!
[Included Parts:were they on?
Only the product is in the Blister pack.
No Instruction Manual.
[Was there anything that disappointed you?
I have been a huge fan of this Series, and I will not be disappointed.
I think the cospa is good and there is a good variety of Sizes to choose from.
I hope DRC will release something other than M6Size!
View detail
Easy-to-use Chain tool with excellent cost performance
There are many cheaper and more expensive Chain tools than this.
Many cheap Chinese Tools are not strong or accurate enough (I bought my first Chinese one and it broke in no time).
It's okay that many of the expensive ones are durable, highly accurate, and long-lasting….
This DRCChain tool, while relatively inexpensive,
Available from 420 to 530 Chain.
Chain cut, Plate press fit, and Crimp all in one tool.
CutPin, which is subject to force, is also firm and can be worked without anxiety.
The handle is solid.
The number of parts and components is small due to the ingenuity of the product.
The handle is hollow, and small parts can be stored in it.
Even if a pin or other item is damaged due to misuse, the company sells the parts in units of parts.
And yet, it is made of color anodized aluminum, which gives it a DRC-like appearance.
Frankly, there is no way to be stingy with it.
Recommendation
View detail
Band of Exhaust System
Exhaust System band removal becomes easier. View detail
To Grip's Wiring
Used for Wiring for Grip.
1.It was Large sturdy enough for 5 times, so even if I made a mistake such as over-tightening and cutting it.
View detail
nothing one can say (e.g. about something perfect)
No need to say anything about the strength or ease of use of the material.
I should have gone with this from the start.
View detail
ForkOH essentials when matching diameter ForkOH
I used to buy a good PVC Pipe for every OH, but this one will do the job.
Installation of Fork seal will be easier anyway.
The price is less expensive than Manufacturer's SST by car. One size is available for the other, and this is the price for such a wide range of sizes.
The usability of the product is also normal, although it is not as good as the dedicated products.
I think it is inexpensive considering the fact that it is possible to set up a seal for sure.
View detail
Not used.
The exterior arrived in a busted up state.
Since the pieces are not in the Corrugated cardboard, I'm going to assume that you sent me a piece with a busted up exterior.
View detail
Still useful when washing the car
I always used to block it with masking tape when washing my car, but now I have purchased it.
I think this will come in handy when washing the car.
View detail
DRC for peace of mind, even if it's 100s of dollars.
I could use a 100-yen wire, but I feel comfortable with the Brand name here. In fact, it was easy to use when processing Grip's Wire, so I don't have any problem with it. I think it is very good stuff. View detail
Cheaper than Homesense
I can't believe the price for a pack of 5. Is there a profit to be made? I bought these bolts because the iron bolts on my car were rusting and I wanted to replace them. I bought these bolts because the iron bolts on my car were rusting, and with this quality, I would be happy to replace all the iron bolts on my car. View detail
Practical necessity
This is one of those invaluable tools that you never think you need until the time comes that you are mounting your own tire or changing out a tube. Nice and small for the trail pack. For the price you can't afford not to have one of these tools. Avoid the sore fingers and get yourself one or pay the guys at the shop to change your tires for $30 a pop.I am glad I added this to my kit. Make feeding the vale stem through the rim so much easier. Changing your own tires, Yes get it! View detail
Texture Up with Black Bolt! A little lighter! What are the effects? (Hatena)
I wanted to install a hand guard, but I felt that the weight of the bolt was too heavy. I also found an aluminum lock nut in DURA-BOLT Shoulder Bag. It is more quantity than the standard bolt nut.:1 Set weighs approx. 4.5g, Quantity:I am a little satisfied with the 18g weight reduction since 4 sets are used! The shape and color of the Bolt improves the appearance of the Parenthesis, and I am even more pleased with myself. View detail
It was subtle.
I was able to remove dirt from a large area, but the Brush included with Chain Cleaner was better at removing dirt in small areas and in the back. I thought the included Brush was smaller and easier to use.
In the end, we concluded that it would be quicker to use the included Brush from the beginning.
I think this area depends on the individual's cleaning style and personality (nervousness, etc.).
View detail
difficult to get a hit on (e.g. in a fight)
[How is it used?
Tire hand set
Was the one you received as per Image?
Small at best, Compact at worst
How was your experience with it?
Normal use Valve core is a little shallow
[Points to note]
Red to see the imprint and not to lose it.
How did it compare to other products?
Anodized and texture is good
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail