Reviews
Fits: KAWASAKI KLX250R (Competition), SUZUKI TS50 Hustler, YAMAHA TY250Z Scottish, YAMAHA TY250Z Scottish, KAWASAKI KDX125/SR, KAWASAKI KDX200R (for competition), KAWASAKI KDX220R (for competition), KAWASAKI KDX250R (for competition), KAWASAKI KLX250SR, KAWASAKI KLX300R, KAWASAKI KX100, KAWASAKI KX100, KAWASAKI KX125, KAWASAKI KX80/II, KAWASAKI KX80/II, KAWASAKI KX85, KAWASAKI KX85, SUZUKI DR250S, SUZUKI RM125, SUZUKI RM125
diminish
I have been using it for a long time and the bearings are worn and rattling. View detail
Fits: KAWASAKI KDX250SR, KAWASAKI KLX250, KAWASAKI KLX250ES, KAWASAKI KLX250SR, SUZUKI 250SB, SUZUKI Jebel 250, SUZUKI DR250S, SUZUKI DR250R, SUZUKI RMX250S, SUZUKI TS200R, KAWASAKI D tracker, SUZUKI DF200, SUZUKI DR125S, SUZUKI DR200, SUZUKI TS125 Hustler, KAWASAKI D Tracker, SUZUKI TS125 HUSTLER, SUZUKI DR200, SUZUKI DR125S, SUZUKI DJEBEL250
Used by D Tracker
[How is it used?
Mounted on D Tracker.
Applications:Motard race, FlatDirt
Used for about 2 years. Many times overturned.
Was the one you received as per Image?
As shown in the image. Since my hands are so small, I needed a lever position adjustment mechanism and a short lever to attach the hand guard.
Was the installation difficult?
The installation is not difficult, but it does require some tools and some adjustment of the clutch. However, since the lever replacement is an introductory step for Custom, if you are well informed, prepared, and have the tools, you will be ready for any battle.
How was your experience with it?
TRAIL (MOTARD) The size and lever position adjustment mechanism were good, but I felt that it slipped and the operation feeling was not so good.
After installing this, I regretted that I should have used ZETA's Pivot lever. I regretted it.
Also, I have small hands. (Glove sizeM) The OEM lever is often difficult to use, but this product allows you to adjust the lever position to a position where you can operate it properly. The ability to operate the lever firmly leads to safe riding, so we recommend that those who have trouble operating the lever because their hands are too small should introduce products with adjustable lever positions, including this product.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Point and hang of installation
Glasses Wrench in Size8 or 10 (Spanner) Is Quantity:You need to be prepared because you will need 2pc.
After installation, lubricate the clutch lever with grease. (Lithium, Urea, Siliconetc.) However, by applying a thin layer, dust adhesion can be kept to a minimum.
If you don't like dust sticking to your fish, you can apply dry lube such as Kure's Dry fast lube, WAKOS' Bidas Dry, etc. on a regular basis.
Dry rubs may be a better choice for MOTARDs with Dirt driving.
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
Please tell me. (_ _) I can't get it to work.
I installed a LEDICRelay made by MOTO LED and the Blinker did not respond.
The other day, when I installed DRC's LED Fender Eliminator Kit, KITACO's Unbreakable lensMini Blinker on the front and rear of KLX250s, High flasher phenomenon occurred on the blinker. I installed the LEDICRelay made by Moto LED, but the Blinker did not come on.
Are there any other necessary parts that I need to install? Please let me know if you have any knowledge about this. (_ _) m
View detail
WiringRefreshing。
It is convenient to be able to use it many times because it can be removed with Release. View detail
Fits: HONDA CR80R/RII, HONDA CR80R/RII, HONDA CR85R/RII, HONDA CR85R/RII, HONDA CRF150R, HONDA CRF450R, HONDA CRM250AR, HONDA CRM250R, HONDA CRM50, HONDA CRM80, HONDA XR250, HONDA XR250 Baja, HONDA XR250 Motard, HONDA XR400 Motard, HONDA CR125, HONDA CR125, HONDA CR250, HONDA CR250, HONDA XR250, HONDA XR250
It doesn't come with a stop-lamp.
It is easy to install, but it is not suitable for ・・・・ XR250 (sweat). The construction is short and I think it is great, but the stop-lamp of the rear fender doesn't turn red even if you brake front because there is no protruding lever that hits the brake switch.
I added another DRCBrake leverShort because I couldn't help it. It's not a problem if you don't have to use the RearStop-lamp.
View detail
It's working just fine
The price is high.
That's all.
Aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa!
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
I couldn't install it because I overlooked a key point.
I bought this to use on my WR250F, but I didn't read the instructions carefully and ended up not being able to use it ……
It's a product I didn't have to buy because it worked fine without this ICRelay on the WR.
I don't know when the corresponding vehicle will be available to me, so I'm keeping it just in case, but if I have a friend who wants one, I'll give it to them.
The thing itself is very carefully built and seems to be quite durable, as it is an Off Car Main brand.
View detail
Fits: KAWASAKI KLX250R (Competition), SUZUKI TS50 Hustler, YAMAHA TY250Z Scottish, YAMAHA TY250Z Scottish, KAWASAKI KDX125/SR, KAWASAKI KDX200R (for competition), KAWASAKI KDX220R (for competition), KAWASAKI KDX250R (for competition), KAWASAKI KLX250SR, KAWASAKI KLX300R, KAWASAKI KX100, KAWASAKI KX100, KAWASAKI KX125, KAWASAKI KX80/II, KAWASAKI KX80/II, KAWASAKI KX85, KAWASAKI KX85, SUZUKI DR250S, SUZUKI RM125, SUZUKI RM125
Processing Required
It's for DJEBEL, but I can't pimp it out.
When you set the lever, the angle part of Lever is changed to fit the hole.
You need to delete it in File
View detail
RubberCover is not included
The long lever is 2 fingers longer than the short lever If it breaks, it will be exchanged with the whole holder, so I had an Adjust Clutch on hand I replaced the Lever with the Long lever and put it on View detail
It's a little cheesy
I used it because it's cheaper than OEM
The shape of the Lever is the same as OEM, but the adjusting bolt is a little cheap It's like
By the way, the OEM was bent due to a fall and I had to replace it
This Lever broke in one shot, it doesn't stick due to the difference in the Material of Aluminum Is it?
A closed hand guard would be no problem
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
Generally high
I also write other people, but I can not even pinpoint Wiring because it is difficult to understand.
I stopped it with Tie Wrap at the place where I removed the original Relay.
Also, it does not have any particular benefit, even if it is made into an LED, cost effectiveness will be low.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250 RALLY, KAWASAKI D Tracker 125, KAWASAKI KDX125/SR, KAWASAKI KLX125, KAWASAKI KLX250, YAMAHA XT125, KAWASAKI D Tracker X, KAWASAKI KLX150, KAWASAKI KLX150, KAWASAKI D-TRACKER-X, KAWASAKI KLX250, KAWASAKI KLX150, KAWASAKI KLX150
Beware of installing XTZ 125
In 2015 I tried to add Short lever to MODEL XTZ 125 and searched for information in various sites.
Apparently it seems to be attached for KDX 125, so I bought it did not match. It is ProductNoD 40-13-410.
The shape is too different..
The shape of the OEM Brake lever is on the picture.
Correctly for SEROW 225 and SEROW 250.
Please be careful not to make a mistake.
ProductNo is also listed.
SEROW225 / It is Short Brake Lever D40-13-606 for 250.
Installation itself is not difficult, but Lever needs Screw to push the master cylinder separately.
Home center and so on, I am selling it, so I think that there is no particular problem.
View detail
Fits: KAWASAKI D Tracker 125, KAWASAKI KLX125, KAWASAKI KLX250, KAWASAKI D Tracker X, KAWASAKI KLX150, KAWASAKI KLX150, KAWASAKI D-TRACKER-X, KAWASAKI KLX250, KAWASAKI KLX150, KAWASAKI KLX150
Short lever repurchase
【What made you decide the purchase?】
Because KLX 250 FIShort lever was like selling DRC only.
【How was it actually used?】
The Clutch short lever used for 6 years has gone bent (Up) So it's re-purchase.
I installed a hand guard so Short lever was a necessity.
Because it is Short, you need to get used to grasp with 3 index finger, middle finger, ring finger 3.
[Is there anything I was disappointed about?]
nothing special.
【Hope for Manufacturer - Please let me know if you have any improvement points]
The price is inexpensive and is useful. Please keep this price range.
【Have you compared items?】
One choice.
View detail
Fits: SUZUKI Jebel 250XC, SUZUKI Jebel 250XC, SUZUKI DR250R, SUZUKI DR250R, SUZUKI DR-Z400S, SUZUKI DR-Z400SM, SUZUKI RMX250S, SUZUKI DJEBEL250 XC, SUZUKI DJEBEL250 XC
Installed in DR-Z 400SM
It is the so-called ordinary Lever with price.
I attached it to the DR - Z 400SM.
I do not know well the strength compared to OEM, but you can use it normally.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250 RALLY, KAWASAKI D Tracker 125, KAWASAKI KDX125/SR, KAWASAKI KLX125, KAWASAKI KLX250, YAMAHA XT125, KAWASAKI D Tracker X, KAWASAKI KLX150, KAWASAKI KLX150, KAWASAKI D-TRACKER-X, KAWASAKI KLX250, KAWASAKI KLX150, KAWASAKI KLX150
Brake lever Short Type
Bending the Clutch lever, when switching Clutch lever to Short Type, it is a simultaneous purchase exchange.
As for impressions after replacement, it looks nice.
Usability is unlimited and unavoidable and it is normal.
I think that it is very affordable if you think that the price is reasonable and expendable items.
View detail
Fits: KAWASAKI D Tracker 125, KAWASAKI KLX125, KAWASAKI KLX250, KAWASAKI D Tracker X, KAWASAKI KLX150, KAWASAKI KLX150, KAWASAKI D-TRACKER-X, KAWASAKI KLX250, KAWASAKI KLX150, KAWASAKI KLX150
Clutch lever Short Type
When you kill Motorcycle Lever bent and it is a replacement.
I got lost when I purchased Short and Standard, but because of the price, I wanted to give Custom degree Short.
As for the impression after installation, it is a strange feeling for Small fingers to hit the ball part for me who holds Clutch using all the balls of the tip shorter and shorter than the Small fingers. If you are unfamiliar it will be replaced by Standard.
If you remove it as a spare item it will not be in vain. The price is not so expensive either.
View detail
DRC Fuel Hose 50cm
Since I changed Carburetor, I bought it without fitting Fuel Hose inner diameter.
Materialetc. I do not know, because the years have not passed yet, I feel good..
View detail
Fits: KAWASAKI KLX125, KAWASAKI D Tracker 125, KAWASAKI KLX150
purchasing last time at the time of Muffler exchange -- necessity -- since it was enough, it re-purchased this time to compensate for EX pipe replacement.A function is satisfactory and good to be able to purchase somewhat cheaply pure.
purchasing last time at the time of Muffler exchange -- necessity -- since it was enough, it re-purchased this time to compensate for EX pipe replacement.A function is satisfactory and good to be able to purchase somewhat cheaply pure. View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
Since the purchase attachment itself only attaches a terminal in order to exchange for an LED Blinker, just Colet of an easy free D-TRACKER is insufficient, and since it becomes a Hazard, a Harness is also required as [ this ].
Since the purchase
attachment itself only attaches a terminal in order to exchange for an LED Blinker, just Colet of an easy
free D-TRACKER is insufficient, and since it becomes a Hazard, a Harness is also required as [ this ].
View detail
Fits: KAWASAKI KLX125, KAWASAKI D Tracker 125, KAWASAKI KLX150
It chose by the ease of carrying out of acquisition.Even if it compares that it is pure, there is no difference of appearance, and the engine performance as a Gasket and a function are enough.Although the rest is durability, probably, it will be satisfact
It chose by the ease of carrying out of acquisition.Even if it compares that it is pure, there is no difference of appearance, and the engine performance as a Gasket and a function are enough.Although the rest is durability, probably, it will be satisfactory. View detail