Reviews
light
I'm thinking mainly for home maintenance.
It's lightweight.
It can be used on the road (Course) etc. from now on.
I'm thinking.
I think it's a good cosmetic…
Personally, I feel that Side Panels are unnecessary unless strength is required.
Now I will have to use it in the future to see how durable it is.
View detail
Looks are nice.
I got lost as Ethos's Lift Stand, but purchased this way as it looks better. Although it seems like this, the seat surface is small and it is a bit uneasy. However, I wash the car without problem with a high pressure washer. He was fluffy, but - - - I think that I can never use it when a child is playing nearby.
Also, Nut for height adjustment is loose, the seat surface turns round and round. It is locked by Lock nut, but if you do not tighten it quite tightly, it will go around for each seat by the weight of Motorcycle and it will eventually loosen. I thought that the locking mechanism after Lift was good, but I think that there is a locking mechanism also in this neighborhood. There is no problem if you use correctly and politely in the overall review. When you remove Lift, if you release Handlebar and Seat with both hands and release Lever to save it with your legs, Stone and Motorcycle go down.
View detail
I do not move suddenly
I feel it has weight feeling after arriving
I did not move even when assembled.
Tentatively I wondered what to do with power skill
I managed to move while scraping the paint.
After that, fill the gap with Grease
I am using it now..
Well it might be a suitable price
Tomorrow I can use it now without problems.
View detail
In Maintenance
Purchased for WR250X Maintenance.
This item is the first purchase.
When cleaning Chain or removing Tire
You can work quite easily.
I am satisfied with the product
If you open the box after arrival parts are out of stock.
I could not use it for about a week without being assembled.
Although that was a bit disappointing
I think that comfort is good.
View detail
The additional purchase of the Option was carried out for the Wheel assembly of a CUB. to use, it is satisfactory at all -- it is -- although -- rust was observed in the Shaft for a while. Although it was able to take easily, it is not in what has a not m
The additional purchase of the Option was carried out for the Wheel assembly of a CUB.
to use, it is satisfactory at all -- it is -- although -- rust was observed in the Shaft for a while.
Although it was able to take easily, it is not in what has a not much good feeling.
About
use, it can be used also with the Wheel of a thin Shaft and is saved very much.
An opportunity to use is likely to increase by having purchased this Option.
View detail
[webike Monitor] It is an additional purchase in order to use it with the Wheel of the CUB. use top is satisfactory -- it is -- although -- connection used a few for the Shaft, having br(ed) [ were and ] > polished. and others are sat
[webike Monitor] It is an additional purchase in order to use it with the Wheel of the
CUB.
use top is satisfactory -- it is -- although -- connection used a few for the Shaft, having br(ed) [ were and ] > polished.
and others are satisfactorily easy-to-use.
View detail
[Webike Monitor] It purchased to maintenance of the D-TRACKER. Since the Container of bottled beer was used until now [ ], it becomes very easy to carry out maintenance. Very much satisfied.
[Webike Monitor] It purchased to maintenance of the
D-TRACKER.
Since the Container of bottled beer was used until now [
], it becomes very easy to carry out maintenance.
Very much satisfied.
View detail
strong point - a Lift up can be carried out lightly, and since it is an oil-pressure Bumper, a Lift Down is also smooth. and stepless height adjustment are Good(s)! and a price are handy. Since the demerit and the top plate f
strong point
- a Lift up can be carried out lightly, and since it is an oil-pressure Bumper, a Lift Down is also smooth.
and stepless height adjustment are Good(s)!
and a price are handy.
Since the
demerit
and the top plate fixed Nut are Singles, a Nut loosens and a top plate rotates.
You should make a Double nut.
and the support lower part protrude.
The Rubber board size raising of the four lower parts of a pedestal was carried out, and the Rubber board was fixed by the Cable tie.
generalization
- it is unavoidable -- ~.
Since he bought it with much trouble, it continues using.
Although the durability of
and a hydraulic damper should be just good ...
View detail
To the extent that the size of a main part and a lift amount are right just. It may shift, when Lift carries out, since the Top plate was not simply stable firmly.
To the extent that the size of a main part and a lift amount are right just.
It may shift, when
Lift carries out, since the Top plate was not simply stable firmly.
View detail
[Webike Monitor] Since off-STAND has not been used until now, it is incomparable, but a STAND can be stood without , especially fault. [ すすす ー っ and ] Also when raising the STAND, a Lift can be carried out without seldom using power, whe
[Webike Monitor] Since
off-STAND has not been used until now, it is incomparable, but a STAND can be stood without
, especially fault.
[ すすす ー っ and ] Also when raising the
STAND, a Lift can be carried out without seldom using power, when taking down, it is the favor whose
Damper is effective, and it can take down, without falling with ガシャン !.
Since it is actually used and the Maintenance has not been carried out yet, it does not understand, but I think that it will large-play an active part when performing Maintenances, such as a Chain, the
Wheel, and Sas.
View detail
[Webike Monitor] He bought it in order to carry out the Maintenance of the Off vehicle. Since it was the first, there is no instruction manual and usage does not unsatisfactorily わかりま. It may say the beginners with a Lift mechanism.
[Webike Monitor] He bought it in order to carry out the Maintenance of the
Off vehicle.
Since it was the first, there is no instruction manual and usage does not unsatisfactorily わかりま.
It may say the
beginners with a Lift mechanism.
View detail
It is used for the maintenance of an off vehicle. Since the beer crate was used until now, it becomes the comparison with it. Sense of stability: Don't change. It sways. It is uneasy to carry out a tire change in this stand. Taking up
It is used for the maintenance of an off vehicle.
Since the beer crate was used until now, it becomes the comparison with it.
Sense of stability: Don't change.
It sways.
It is uneasy to carry out a tire change in this stand.
Taking up and down: It is very easy and easy.
View detail
As the comment to be used ... Good place:1 and height can be tuned finely and it can be used by an off vehicle at large. A damper is effective and safe, when taking down, 2 and. Locke of 3 and the raised lever can be carried out, and safe. 4 a
As the comment to be used ... Good place:1 and height can be tuned finely and it can be used by an off vehicle at large.
A damper is effective and safe, when taking down, 2 and.
Locke of 3 and the raised lever can be carried out, and safe.
4 and cost performance are good.
Be? Place: If lift up is carried out, it will incline to the part damper side of play of the central part (stanchion) a little.
It is five stars ... and to incline and go up, although it is such touch at a stretch, if mine does not have ? it skill.
View detail
Fits: HONDA CRF250R, HONDA CRF450R, HONDA CRF450RX, SUZUKI RM-Z450, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ450F, HONDA CR125, HONDA CR250, HUSQVARNA FC250, HUSQVARNA FC250, HUSQVARNA FC250, HUSQVARNA FC350, HUSQVARNA FC350, HUSQVARNA FC450, HUSQVARNA FC450, HUSQVARNA FC450, HUSQVARNA FE125 14-18 (11mm), HUSQVARNA FE125-501 14-18 (11mm)
It was used in KX85. It is very cheap in cost, and since it is completely different when there is nothing when it is, it is recommended. It is convenient if you are truly. It carried out in the rate, it rusted immediately, and became tattering
It was used in KX85.
It is very cheap in cost, and since it is completely different when there is nothing when it is, it is recommended.
It is convenient if you are truly.
It carried out in the rate, it rusted immediately, and became tattering, and when the axle slider was attached, it was not able to use.
Furthermore, it damaged immediately, and the plug portion bent and was by carrying out.
It seems to be better to consider consumable goods.
View detail
Fits: KAWASAKI KLX300R, KTM 125EXC, KTM 125EXC, KTM 200EXC, KTM 250EXC, KTM 250EXC-F, KTM 300EXC, KTM 350EXC-F, KTM 360EXC, KTM 380EXC, KTM 400EXC, KTM 450EXC-F, KTM 500EXC, KTM 500EXC-F, KTM 520EXC, KTM 530EXC, KTM 530EXC, SUZUKI DR250R, SUZUKI RM85, YAMAHA DT200WR
It is used for WR250R. Because a car body is heavy, it bends simply. Since the crack is not contained, it can still use, but if weight is applied, it will not arrange. Let's check the state of a ground surface.
It is used for WR250R.
Because a car body is heavy, it bends simply.
Since the crack is not contained, it can still use, but if weight is applied, it will not arrange.
Let's check the state of a ground surface.
View detail
Since it is heavy at the product made from steel, it is not fit for carrying, but structure can improve lift up to the whole comfortably. It may be easy also when taking down, since the damper when taking down is well effective and it does not fall wi
Since it is heavy at the product made from steel, it is not fit for carrying, but structure can improve lift up to the whole comfortably.
It may be easy also when taking down, since the damper when taking down is well effective and it does not fall with a bang.
Since the motorcycle turned after carrying out lift up, since height adjustment was a type which is made to rotate a top board and is adjusted by the die length of a screw thread, I to be warned dropped the motorcycle once.
Although the lock nut is attached, it is hardly effective.
View detail
It purchased to xr250. Since it motorcycle-stand-self--object-began and was purchased and used, although a comparison is impossible, it becomes comment below. - The big power of the lift up down itself is also unnecessary, and it is simple for it.
It purchased to xr250.
Since it motorcycle-stand-self--object-began and was purchased and used, although a comparison is impossible, it becomes comment below.
- The big power of the lift up down itself is also unnecessary, and it is simple for it.
- A problem can be made for there to be nothing, if it gets used although setting to a good location worried at first (I think that it changes also with motorcycles).
- A treading-in lever is somewhat short.
In pedals, it breaks in and is hard to carry out.
- A lever opens at the time of storage and conveyance, and troublesome.
Locke in a lever top wooden-clogs state is satisfied as for the time being cheapest stand with a lift needed.
View detail