Reviews
If you want to use footpegLarge, this is the way to go.
Product Name
DRC DRC Chromoly Wide Foot Peg
Item Number
F6245
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
20 min.
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
If you want cheapness and sturdiness with a Large cutoff, I went with this. I also chose this one because it is called DRC.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It may be difficult to go alone, but I think I can go Limit with this...I have to make sure to stop Pin well.
How was your experience with it?
I feel that the footpeg is different when the footpeg is large. Also, the black color is cool.
[Included Parts:were they on?
None in particular.
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
I like the Bearing.
[How is it used?
I was washing my car after Race and it was run out of the house, so I bought it.I could have bought OEM, but I chose this DRC Chain roller, which was in immediate delivery.
The OEM chain roller is just a rubber with a steel spacer, but this one has a bearing, a hard material like DURACON, and a variety of colors, which I recommend. I wonder why OEMs don't have Bearing in their rotary products?
Was the one you received as per Image?
As per Image
Was the installation difficult?
It is not particularly difficult.
How was your experience with it?
It is still a good point that Bearing is firmly attached to both SIDE.
It's nice to be in One Point's colors again.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
None in particular. I'm a Repeat buyer because I know it's quite durable.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Lock nut is a must because it tends to loosen easily~. Also, measure the OEM size before you buy. If you drop it, it is not a good idea to buy it anyway.
Size:L Roller diameter:42mm is here (https://www.webike.net/sd/9398500/)
View detail
Fits: KAWASAKI KLX250, KAWASAKI KLX300R, KAWASAKI D Tracker
Increased stability!
I bought it for its looks because Base is an Off car, even though I don't go on forest roads.
The sole of the foot has more ground contact surface and is more stable.
It is not a concern, but compared to the OEM Peg, it may hit the hanghang on the shin when standing upright.
Split Pin has been replaced with a new one. Installation may require a little hang!
View detail
Ideal for SEROW
The OEM Fork Spring was not firm and unreliable on heavy roads, but this Spring is moderately stiff and optimal performance can be achieved by using #10 Fork Oil. View detail
Fits: KAWASAKI KLX230R S, KAWASAKI KLX230R, KAWASAKI KLX230 S, KAWASAKI KLX230
Great place to put your feet up
Very similar to OEM pegs. Black finish proving durable and plenty of grip on my boots. Best of all is the excellent price compared to the exotic works pegs. Great pegs that preform better than the stock narrow pegs. Easy to install and good quality. I'd recommend these to anyone looking for an affordable replacement. Thanks for the fast shipping and careful packaging. A classic Webike shopping View detail
footpegfootpegRANRANRAN
Simultaneous footpeg exchange is the norm! View detail
Excellent stability.
I installed it on my CRF125F and replaced the OEM one because the Small one slips a lot. Installation was easy. You need a split pin to replace it. It is possible to reuse it, but I think it is better to replace it because it is cheap.
I have used it and found it to be very stable and hard to slip on.
The rest is Parenthesis ?
View detail
Fits: SUZUKI DR350, SUZUKI DR250R, KAWASAKI KLX150, KAWASAKI KLX150, KAWASAKI KLX125, KAWASAKI D Tracker 125, SUZUKI DR350, SUZUKI DJEBEL250 XC, SUZUKI DJEBEL250
Sturdy and good looking.
It is solid and sturdy, and it gives me a lot of off-road grunt. It looks good, too.
However, when I hooked up the Spring, the Spring was quite hard and Large was strange. Other than that, I don't think there is anything difficult in terms of work skill.
View detail
wonderful (e.g. of a meal)
OEMs are slippery and unstable when the footpeg and soles are wet, but this footpeg is not slippery under such conditions.
The CT110 HUNTER CUB, which does not have a knee grip, is very effective and worth replacing.
View detail
Also for the second SEROW.
I had it on a previous generation SEROW,
I put it on my current SEROW.
It feels more solid and quicker to run.
View detail
ได้รับสินค้าตรงตามที่สั่ง จำหนวน 1 ชิ้น สินค้ามีคุณภาพดี แพ็คมาอย่างดีครับ View detail
Very well built and highly durable
When we increased the swing arm angle of SR400, the chain came in contact with the frame and the change shaft, so we used this product to avoid this problem. I cut a 4mm thick aluminum plate to make a bracket as shown in the picture, and attached this product.
Before I installed this Roller, I had installed my own urethane wheel from Home center, but it was narrow and its rotation and trajectory were not stable, so I had various problems. It takes a lot of time and money to make a roller that is just right for me.
The product itself is very well built and turns quietly due to the quality of the resin.
The point of particular interest is the bearing used. The bearing is made of high-grade stainless steel bearing, and as you can see in the picture, the inner ring is slightly protruding, which makes the bearing very easy to work with.
As for dustproofing, it is a non-contact Gold Shield type, so its dustproofing performance is inferior to the contact seal type, but I have used it for about two years and have not experienced any particular problems.
Anyway, I bought it and used it and was extremely happy with it. I strongly recommend it to anyone who is not sure about buying it.
View detail
They do their job properly.
D Tracker 125, with a Chain slider that does not rotate.
I replaced this. It feels good to rotate smoothly.
View detail
Fits: YAMAHA XG250 TRICKER, YAMAHA SEROW250, YAMAHA XT250X
If you want to raise the ride height quickly, this is the way to do it.
Together with the high seat, the Seat height is 880mm when standing upright. View detail
Fits: SUZUKI RMX250S, SUZUKI RM250, SUZUKI RM125, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, SUZUKI RMX250, SUZUKI DR-Z400S, SUZUKI DR-Z400S
Items that can give a MOTARD feeling
The footpeg was bent in a fall and I had to replace it.
The rigidity is very good, but may be slightly heavy.
I think it is slip resistant enough, and since it is Wide rather than OEM, it is more stable.
Some may find it difficult to match the colors since the Slider is only available in one color, Red.
With OEM Pin or Washer, the gap is − the point where the OEM Pin or Washer would have a gap. For this price and car model Exclusive Design, I want Spacer.
View detail
Fits: YAMAHA WR250F, YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR400F-450F, YAMAHA WR450F, YAMAHA YZ125, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ450F, YAMAHA YZ65, YAMAHA YZ85, YAMAHA YZ450FX, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ250F, YAMAHA WR450F, YAMAHA WR400F-450F, YAMAHA WR400F
You can stand firm.
They are non-slip even when wet and allow me to step on them firmly so I can concentrate on running. View detail
Fits: HONDA CROSS CUB110, HONDA CROSS CUB110, HONDA CROSS CUB110
fashion starts with the feet
It could be installed on the New ModelCROSS CUB.
I was worried because it was not listed as compatible with the current model, but it was Large sturdy.
I am happy to be free from hitting the inside of Pants.
View detail
Fits: HONDA CRF250X, HONDA CRF250M, HONDA CR125, HONDA CR250, HONDA CRF150R, HONDA CRF250R, HONDA CRF250RX, HONDA CRF450R, HONDA CRF450RX, HONDA CRF450L, HONDA CRF450RL, HONDA CRF450X, HONDA CRF250L, HONDA CRF250RALLY, HONDA CRF250L, HONDA CRF250L S, HONDA CRF250RALLY, HONDA CRF250RALLY S, HONDA CRF300L, HONDA CRF300L RALLY
Solid pegs, excellent price.
Very similar to OEM pegs. Black finish proving durable and plenty of grip on my boots. Best of all is the excellent price compared to the exotic works pegs. Absolutely a great upgrade for your bike. Didn't think I'd notice much of a difference, but could tell they were better than stock within the first 2 minutes of riding. They offer way more support, and feel a lot more stable while standing. These pegs are worth every penny, and I'm surprised they were so affordable!! Mounting was super easy, and I'd recommend getting a couple of new cotter pins to replace the stock ones on your bike. View detail
Fits: BETA RR2T 125, BETA RR2T 250, BETA RR2T 300, BETA RR4T 350, BETA RR4T 450, BETA RR4T 498, BETA X-Trainer 250, BETA X-Trainer 300, HUSQVARNA FC250, HUSQVARNA FC350, HUSQVARNA FC450, HUSQVARNA FE501, HUSQVARNA FS450, HUSQVARNA TC125, HUSQVARNA TC250, HUSQVARNA TE125, HUSQVARNA TE150, HUSQVARNA TE300, HUSQVARNA TE310, HUSQVARNA TE400
Supermotard pegs
Love them! A nice wider platform, they feel reall good, and the grip is great on them. Easy to install as well. Bought it for the KTM supermoto project. I love the look and feel of the pegs. It's really cool. It has a clean black look with a nice red slider underneath to protect them. It fits perfectly with the stock shifter and brake levers. if you are planning to upgrade your footbrake lever we will at least use the lever I have. The latch mounting point is thicker than the stock and stops the brake lever from going all the way down. I simply grinded it in the area where my brake lever was touching and it now cleans perfectly. I haven't heard any complaints from anyone else on the subject, so it's probably the leverage I bought, so most won't have this issue. View detail
Fits: BETA RR2T 125, BETA RR2T 250, BETA RR2T 300, BETA RR4T 350, BETA RR4T 450, BETA RR4T 498, BETA X-Trainer 250, BETA X-Trainer 300, HUSQVARNA FC250, HUSQVARNA FC350, HUSQVARNA FC450, HUSQVARNA FE501, HUSQVARNA FS450, HUSQVARNA TC125, HUSQVARNA TC250, HUSQVARNA TC85, HUSQVARNA TE125, HUSQVARNA TE300, HUSQVARNA TE310, HUSQVARNA TE400
I put in low seats.
I put in a -5mmType because my legs were cramped after putting in the low seat.
I also put LOW on my WR250R, it is more stable when standing as well as when sitting as it has a lower center of gravity than the OEM.
A mere 5mm is a Large size.
One drawback is that the positioning of the Shift Pedal is SEVERE.
If you match the OEM, it will be too high, and if you lower it by 1pc. it will be a little too low, so you have to compromise on one or the other.
I would buy this one even if it cracks because it is sturdier and less expensive than the EXC-F OEM.
View detail